Panasonic EverVolt Mini EVAC-105-2 Manuel utilisateur

Installation Manual

FOR EVERVOLT™ACCOUPLED SYSTEMS

Models:

EVAC-105-2, EverVolt Mini, 5.7 kWh AC Coupled System

EVAC-105-4, EverVolt Standard, 11.4 kWh AC Coupled System

EVAC-105-6, EverVolt Plus, 17.1 kWh AC Coupled System

V. 110519

2Installation Manual

We are committed to quality and constant improvement. All specifications and descriptions

contained in this document are verified to be accurate at the time of printing. However,

we reserve the right to make modifications at any time that may result in a change of

specification without notice in our pursuit of quality. If you find any inconsistencies or errors

in this document, please notify us at

panasonicbatterystorageus.panasonic.com

Check the resources page at na.panasonic.com/us/solar for the latest specifications and

manuals.

All information in this document is subject to copyright and other intellectual property rights

of Panasonic. This material may not be modified, reproduced or copied, in whole or in part,

without the prior written permission of Panasonic and its licensors. Additional information is

available upon request.

As of September 1, 2019 EverVolt™ AC-Coupled has been successfully tested and operated

using frequency control with the following solar inverters:

Fronius, Enphase Energy, SolarEdge HD Wave

Please contact your Panasonic sales representative for the complete list of inverter models

tested and approved with EverVolt.

Installation Manual

Table of Contents

Important Safety Warnings 4

About EverVolt Certifications 11

Planning for Installation 14

1. What's in the Box 16

2. Installing the Battery Enclosure 17

3. Mounting the Inverter 26

4. Connections 29

5. Grid (Utility) Connection 30

6. Battery Connection and Charging Requirements 32

Connecting the Batteries 33

Disconnecting Equipment 40

7. Essential Load Connection 41

8. Installing the PowerHub 44

Disconnecting Remote Control of the PowerHub 46

9. Connecting the Internet-Over-Power (PLC) 47

10. System Types: Quick Disconnect Terminals 48

11. Wiring Diagram 49

12. Operation and Display Panel 50

How to Turn the System On -- Grid-tied 50

Starting the System -- Off-Grid (Black Start) 51

How to Turn the System Off 52

LCD Screen -- Icons and Pages 53

13. Generator [Optional] 61

14. Configuring the Hardware 63

15. Commissioning 67

16. Internet Connectivity Options 68

17. Maintenance & Cleaning 70

18. Troubleshooting 72

19. Installing and Replacing Additional Batteries 73

20. Specifications 75

21. EverVolt Limited Warranty 77

Table of Contents

4 Installation Manual

IMPORTANT SAFETY WARNINGS

PLEASE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS ON

THE UNIT AND THIS MANUAL BEFORE USING THE INVERTER. STORE

THIS USER MANUAL WHERE IT CAN BE ACCESSED EASILY.

WARNING: Only an authorized EverVolt technician with appropriate

contracting license(s) should attempt to service the EverVolt. Please

consult your local codes and standards for required qualifications to

install and service an energy storage system.

Safety Symbols

WARNING. This indicates the risk of electric shock. The

presence of high voltage levels may constitute a risk of injury

or death to users and/or installers.

CAUTION. This indicates important information where failure

to comply may result in safety hazards or cause damage to

this product.

CAUTION. This indicates the risk of a hot surface. The surface

may reach a temperature high enough to cause serious burn

injuries.

General Inverter Precautions

CAUTION. Before installing and using this inverter, read all

instructions and cautionary markings on the inverter and

all appropriate sections of this guide. This inverter must be

installed by licensed electricians only.

CAUTION. Normally grounded conductors may be

ungrounded and energized when a ground fault is indicated.

CAUTION. This inverter is heavy. It should be lifted by at least

two persons for safety.

CAUTION. To reduce risk of fire hazard, do not cover or

obstruct the cooling fan.

CAUTION. Do not operate the Inverter if it has received a

sharp blow, been dropped, or otherwise damaged in any way.

If the Inverter is damaged, contact Panasonic for an RMA

(Return Material Authorization).

Important Safety Warnings

Installation Manual

CAUTION. Under high temperature environment, the cover

of this inverter could be hot enough to cause skin burns if

accidentally touched. Ensure that this inverter is away from

normal traffic areas.

WARNING. These servicing instructions are for use by

qualified personnel only. To reduce the risk of electric shock,

do not perform any servicing other than that specified in the

operating instructions unless you are qualified to do so.

WARNING. Authorized service personnel should reduce the

risk of electrical shock by disconnecting AC, DC and battery

power from the inverter before attempting any maintenance

or cleaning or working on any circuits connected to the

inverter. Turning off controls will not reduce this risk.

Internal capacitors can remain charged for five (5) minutes

after disconnecting all sources of power.

WARNING. Do not disassemble this inverter yourself. It

contains no user-serviceable parts. Attempting to service this

inverter yourself may cause a risk of electrical shock or fire

and will void the warranty from the manufacturer.

WARNING. To avoid a risk of fire and electric shock, make

sure that existing wiring is in good condition and that the wire

is not undersized. Do not operate the Inverter with damaged

or substandard wiring.

WARNING. During the installation process, drilling, punching,

and screwing the bolts can cause metal burrs, which must be

cleaned up to prevent them from falling into the electronics.

WARNING. Use only recommended accessories.

WARNING. Exposed hazardous voltage, during servicing or

for emergency procedures use a lockable manual breaker

lockout on the main service panel disconnects to enable

Lock-Out-Tag-Out per the Standard for Electrical Safety in

the Workplace, NFPA 70E, and the Standard for Workplace

Electrical Safety, CSA Z462, and any other local codes and

standards relevant to your jurisdiction.

Important Safety Warnings

6 Installation Manual

BATTERY PACK WARNINGS:

There is danger of generating heat / smoke / rupture flames.

Do not disassemble battery pack.

Do not touch disassembled battery pack.

Do not reassemble battery pack.

Do not immerse the battery pack in any liquids or get it wet.

Do not short circuit battery pack.

Do not incinerate or heat the battery pack.

Do not use or leave the battery near a fire, stove, or heated

place.

Do not impact the battery pack or throw it.

Do not use a damaged and/or deformed battery pack.

Do not drive sharp objects into the battery pack, strike it with

any object, or stand on it.

Do not place the battery pack on materials such as tools,

electric wire, screws, etc.

Do not touch a leaked battery pack.

In case of a leak in the battery pack, avoid contact.

Do not touch your eyes if accidental contact with leaky battery.

Do not expose to corrosive substances such as sea breeze,

steam, or chemicals.

Do not install in humid places or places with condensation.

Do not install or use the EverVolt if it has been damaged in

any way.

CAUTION. Do not expose the EverVolt to liquids or flooding.

Do not expose of equipment or batteries with household

waste.

Do not dispose of batteries in a fire or by burning. The

batteries can explode.

Important Safety Warnings

Installation Manual

WARNING. Charge EverVolt only within the specified

conditions (e.g. temperature range, voltage, current, etc.)

Failure to do so may result in damages, heat generation,

smoke, fire, or explosion.

Check the positive (+) and negative (-) terminals. If EverVolt

is connected with reversed polarity, unexpected reactions

may occur such as damages, heat generation, smoke, fire, or

explosion.

Do not connect between the positive (+) and negative (-)

terminals with a conductive material (e.g. wire, a cable, etc.).

This may result in damages, heat generation, smoke, fire, or

explosion.

Do not directly solder the EverVolt. This may result in

damages, heat generation, smoke, fire, or explosion.

WARNING: Risk of electric shock. Risk of fire. Do not attempt

to repair the battery(ies); it contains no user-serviceable

parts. Tampering with or opening the battery(ies) will void

the warranty. If the battery(ies) fails, contact Panasonic at

panasonicbatterys[email protected]

WARNING: Proper disposal of lithium-ion batteries is

required. Please contact your Panasonic representative for

disposal and recycling measures.

WARNING: Take care when lifting the Battery. The Battery is

heavy and may require a lifting tool to initially lift the battery

high enough to get a good hold on it.

Important Safety Warnings

8 Installation Manual

WARNING: Only an authorized technician should attempt to

service the EverVolt.

WARNING: Risk of injury and equipment damage. Protect the

EverVolt from damage and improper use.

WARNING - ARC FLASH AND SHOCK HAZARD: Appropriate

PPE and Tools Required while working on this energized

equipment.

INVERTER WARNINGS: Method of active anti-islanding

protection: The Inverter monitors for sudden changes in the

impedance of the grid by looking for changes in the second to

the eighth harmonic.

Perform installation and wiring in accordance with all

applicable local electrical codes and standards.

Protection against lightning and resulting voltage surge must

be in accordance with local standards.

Using unapproved attachments or accessories could result in

damage or injury.

Use Class 1 wiring methods for field wiring connections to

terminals of a Class 2 circuit. Use only 6-8 AWG (2.5mm2

to 4mm2) and 1/0 wire in the junction box terminal block.

Select the wire size based on the protection provided by the

circuit breakers / fuses. Install properly rated over-current

protection as part of the system installation.

To ensure optimal reliab

lity and to meet warranty

requirements, the Inverter must be installed and/or stored

according to the instructions in this guide.

Important Safety Warnings

Hazardous Waste:

In the event that the Inverter or one or more batteries of EverVolt is

defective and needs to be removed, replaced, temporarily uninstalled,

disposed of, decommissioned or if Panasonic Customer Support

authorizes a replacement (RMA), perform the following steps:

1. Follow installation and service shut down.

2. Contact Panasonic at panasonicbattery[email protected]om

Installation Manual

WARNING: The Inverter is intended to operate with an

internet connection. Failure to maintain an internet

connection may have an impact on the warranty. See

na.panasonic.com/us/EverVoltsupport for full terms and

services.

When replacing an Inverter, it must be replaced with the same

type of Inverter.

Properly mount the Inverter or place it on a flat, plain surface

that can bear heavy weights. Ensure that the mounting

location is structurally suited to bearing the weight of the

Inverter.

During use, storage, and transport, keep the Inverter:

• Properly ventilated

• Away from water, other liquids, heat, sparks, and direct

sunlight

• Away from excessive dust, corrosive and explosive gases,

and oil smoke

• Away from direct exposure to gas exhaust, such as from

motor vehicles

• Free of vibrations

• Away from falling or moving objects, including motor

vehicles

• At an elevation of less than 3,000 m above sea-level

• In a location compliant with fire safety regulations (has a

smoke alarm)

• In a location compliant with local building codes and

standards

• Conditions for the Inverter installation site apply also to

storage conditions

Important Safety Warnings

10 Installation Manual

In Case of Fire or Other Emergency

In all cases:

• If safe to do so,

1. Initiate Rapid Shutdown and allow the DC voltage to drop to a

safe level

2. Power down inverter, and

3. Disconnect wiring sources of AC and DC power

• Contact the fire department or other required emergency response

team.

• Evacuate the area.

In case of fire:

• When safe, use a fire extinguisher. Suitable types are A, B, and C dry

chemical fire extinguishers. Additional extinguishing media include

water, carbon dioxide, or alcohol-resistant foams.

In case of flooding:

• Stay out of water if any part of the system or wiring is submerged.

• If possible, protect the system by finding and stopping the source of

the water, and pumping it away.

• If submerged, the whole system may need to be replaced.

• Let the area dry completely before use.

In case of unusual noise, smell or smoke:

• Ensure nothing is in contact with the system or in the venting area on

top of the Inverter or Battery enclosures.

• Ventilate the room.

• Contact Panasonic at panasonicbattery[email protected]om

Fire or Emergency

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Panasonic Stockage

Panasonic

Panasonic FZ-VSD40 Series Manuel utilisateur

Panasonic

Panasonic VW-PT2 Manuel utilisateur

Panasonic

Panasonic RP-SDP24GE1K Manuel utilisateur

Panasonic

Panasonic RP-SM02GCE1K Manuel utilisateur

Panasonic

Panasonic SV-PT1EB Manuel utilisateur

Panasonic

Panasonic RP-SDRA32GEK Manuel utilisateur

Panasonic

Panasonic RP-SDRC32GAK Manuel utilisateur

Panasonic

Panasonic FZ-VSD55 Series Manuel utilisateur

Panasonic

Panasonic AG-MSU10P Manuel utilisateur

Panasonic

Panasonic JU-314 Manuel utilisateur

Panasonic

Panasonic WJHDE300 - DIGITAL DISK RECORDER Manuel utilisateur

Panasonic

Panasonic RP-SDU64GE1K Manuel utilisateur

Panasonic

Panasonic SUPERDISK LKM-FK73-D Manuel utilisateur

Panasonic

Panasonic RP-SDUA32GUK Manuel utilisateur

Panasonic

Panasonic RP-SDZA64GAK Manuel utilisateur

Panasonic

Panasonic RP-SDN16GU1A Manuel utilisateur

Panasonic

Panasonic RP-SMGA32GAK Manuel utilisateur

Panasonic

Panasonic RP-SMGT32GAK Manuel utilisateur

Panasonic

Panasonic RP-CFEX128 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Panasonic

Panasonic RP-SDZA64GAK Manuel utilisateur

Panasonic

Panasonic AJ-PX800G Manuel utilisateur

Panasonic

Panasonic AJ-PCS060G - DVCPRO - Data Storage Wallet Manuel utilisateur

Panasonic

Panasonic RP-SDW64GE1K Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur

Dell

Dell PowerVault MD3600f Series Manuel utilisateur

CFI

CFI TERA STOR SATA RAID IV Manuel utilisateur