Panasonic OneHome KX-HCM110A Manuel utilisateur

Additional Feature table

The following features are added to the camera. Read both the Operating

Instructions manuals before using the product.

Additional Features Contents Page

Error messages and screen

color

When general or guest users access

the Single Camera page outside the

Operation Time, or when over 30 (the

maximum number) users access the

page simultaneously, a gray screen

and error messages will be displayed

on the page.

page 3

Increase in the number of preset

positions

Up to 20 preset positions can be

registered.

page 4

[Time] on the Camera Page [Time] of Return to Specified Position

on the Camera page is changed.

page 7

The Lens Position When

Triggered by alarm signal when

buffering or transferring images

One of 20 registered preset positions,

as well as the home position or alarm

positions 1–2, can be selected for the

Lens Position When Triggered by

alarm signal.

page 8

The Lens Position When

Triggered by motion detection

when buffering or transferring

images

One of 20 registered preset positions,

as well as the home position or alarm

positions 1–2, can be selected for the

Lens Position When Triggered by

motion detection.

page 9

Operating Instructions (Additional Features)

Model No.

KX-HCM110A

Network Camera

Operating Instructions (Additional Features)

Trademarks

• This software is based in part on the work of the Independent JPEG Group.

• All other trademarks identified herein are the property of their respective

owners.

Abbreviations

• "Network Camera" is called "Camera" in this Operating Instructions.

Increase in the number of preset

positions on your cell phone

Still images from 20 preset positions

can be viewed from a compatible cell

phone over the Internet.

page 10

Additional Features Contents Page

Operating Instructions (Additional Features)

[For assistance, please call: 1-800-272-7033] 3

Error messages and screen color

When general or guest users access the Single Camera page outside the

Operation Time, or when over 30 (the maximum number) users access the page

simultaneously, a gray screen and error messages will be displayed on the page.

Error Message Cause and Remedy

Operation time has

been specified.

When general or guest users access the Single Camera

page outside the Operation Time, a gray screen will be

displayed. Clicking [Refresh] on the web browser displays

an error message. Consult your administrator about the

Operation Time.

Maximum number

of connections

exceeded.

When [Motion] is selected for the Refresh Interval, up to 30

users can access the camera simultaneously. For the 31st

user, a gray screen and an error message will be displayed

on the Single Camera and Buffered Image pages. Wait for

a moment, and click [Refresh] on the web browser, or

change the value for the Refresh Interval.

An error message

is displayed.

Operating Instructions (Additional Features)

Increase in the number of preset positions

Up to 20 preset positions can be registered. These positions can be changed.

• Registered buttons are shown in blue.

• Unregistered buttons are shown in white.

1. Click [Program].

• [Program] switches to [Cancel].

Click [Cancel] to quit without saving

changes.

2. Pan and tilt the camera to a desired

position.

3. Select a preset position (1–20) from

drop-down list, and enter the preset

name.

E.g.:

Setting "Center" for the preset 5. When

selecting a preset button (1–8), enter the

preset name.

• Maximum 15 characters.

• Enter ASCII characters or

characters in each language. But

[Space], ["], ['], [&], [<] and [>] are

not available.

4. Click [Save] to register, or click [Back]

and [Cancel] to cancel.

• If "Success!" is displayed, click

[Back].

Home

Position,

Alarm

Position

and Preset

Position

Setting

a name

Preset

number

The preset

number and

preset

name are

displayed.

The button

turns blue.

Only buttons

1 to 8 are

displayed.

Program

Operating Instructions (Additional Features)

[For assistance, please call: 1-800-272-7033] 5

Note

• Only an administrator can register preset positions.

• When registering preset positions, the camera also saves brightness and

white balance settings. The digital zoom value will not be saved.

• The registered preset positions can be selected in the Specified Position

of Return to Specified Position on the Camera page. (See page 7)

• The registered preset positions can be selected in the Lens Position When

Triggered setting when Alarm No.1–2 or Motion Detection is selected for

the Trigger in the Trigger Setting window. (See page 8 or page 9)

• The registered preset positions can be viewed on your cell phone. (See

page 10)

Viewing the Image

1. Click or select the home position,

alarm position or registered preset

position.

• The camera takes each position,

and the image is displayed.

Note

• The registered preset positions

can be viewed on your cell

phone.

• The preset position may be

developed into a gap.

Center

Home Position,

Alarm Position

and Preset

Position

Pan/Tilt

After selecting

a preset position,

the preset name

will be displayed.

Putting the

cursor displays

the preset

name.

Home

Position

Operating Instructions (Additional Features)

Changing or Deleting the Settings

1. Click [Program].

• [Program] switches to [Cancel].

Click [Cancel] to quit without saving

changes.

2. Pan and tilt the camera to a desired

position.

• When deleting, this step is not

necessary.

3. Click the home position, alarm position

or a preset number (1–20).

Note

All the items can be selected from the

drop-down list. It is also possible to set

positions 1–8 by clicking the preset

buttons.

4. Click [Save] after setting the preset

name or click [Delete].

• If you quit to change or delete

settings, click [Back], and then

[Cancel].

• If "Success!" is displayed, click

[Back].

Note

The home position or the alarm position

cannot be deleted, and these position

names cannot be changed either.

Pan/Tilt

Changing

the name

Preset

number

The deleted

button turns

white.

Home

Position

Home

Position,

Alarm

Position

and Preset

Position

Operating Instructions (Additional Features)

[For assistance, please call: 1-800-272-7033] 7

[Time] on the Camera Page

[Time] of Return to Specified Position on the Camera page is changed.

Setting Description

Return to

Specified

Position

• If the camera is not operated during the specified period,

the camera turns to the specified position.

• The following settings are available.

– Time - Do not move, 10 s, 20 s, 30 s, 1 min, 5 min, 10

min, 30 min, 1 h

– Specified Position - Home Position, Preset No.1–20,

Alarm No.1, Alarm No.2

Note

• If you did not set any presets, the camera cannot turn

to the preset position.

• When registering preset positions, set Time long

enough to complete the registration process.

If Time is set too short, the camera will return to the

specified position while registering preset positions.

Operating Instructions (Additional Features)

The Lens Position When Triggered by alarm signal when

buffering or transferring images

One of 20 registered preset positions, as well as the home position or alarm

positions 1–2, can be selected for the Lens Position When Triggered by alarm

signal. Images from this position will be buffered or transferred.

Note

If you enable the Lens Position When Triggered setting, buffer/transfer starts

after the camera turns to the home position, alarm positions 1–2 or registered

preset positions 1–20.

• Clicking [<Back] takes you back to the previous page.

• Clicking [Cancel] takes you back to the Trigger page without saving

changes.

Setting Description

Lens Position

When Triggered

• Set the home position, an alarm position 1–2 or registered

preset position 1–20 when an alarm signal is detected.

Operating Instructions (Additional Features)

[For assistance, please call: 1-800-272-7033] 9

The Lens Position When Triggered by motion detection when

buffering or transferring images

One of 20 registered preset positions, as well as the home position or alarm

positions 1–2, can be selected for the Lens Position When Triggered by motion

detection. Images from this position will be buffered or transferred.

Note

If you enable the Lens Position When Triggered setting, buffer/transfer starts

after the camera turns to the home position, alarm positions 1–2 or registered

preset positions 1–20.

• Clicking [<Back] takes you back to the previous page.

• Clicking [Cancel] takes you back to the Trigger page without saving

changes.

Setting Description

Lens Position

When Triggered

• Set the home position, an alarm position 1–2 or registered

preset position 1–20 when motion detection is triggered.

Operating Instructions (Additional Features)

Increase in the number of preset positions on your cell phone

Still images from 20 preset positions can be viewed from a compatible cell phone

over the Internet.

You can view registered preset positions by

clicking links.

Displays up to 50 logs chronologically. The logs

are displayed only for an administrator.

Goes to the control page.

Displays the number of new logs.

Displays the date and time, the kind of signal and

sensor.

Goes to the control page.

Display

Operation

Signal

A1 R

A2 F

Alarm1

Alarm2

Motion Detection

Rising: GND to

Open (High).

Falling: Open (High)

to GND.

-----

Autres manuels pour OneHome KX-HCM110A

Autres manuels Panasonic Caméra de sécurité

Panasonic

Panasonic WV-CF224 Manuel utilisateur

Panasonic

Panasonic BL-C140 Manuel utilisateur

Panasonic

Panasonic WV-SW558 Manuel utilisateur

Panasonic

Panasonic GPMF502 - ICD CAMERA Manuel utilisateur

Panasonic

Panasonic BL-C230 Series Manuel utilisateur

Panasonic

Panasonic AW-HE40HWP Manuel utilisateur

Panasonic

Panasonic KX-HNC710W Manuel utilisateur

Panasonic

Panasonic WV-CP500 series Manuel utilisateur

Panasonic

Panasonic BL-VT164 Series Manuel utilisateur

Panasonic

Panasonic WV-SP305 Manuel utilisateur

Panasonic

Panasonic WV-SF549 Manuel utilisateur

Panasonic

Panasonic BL-C30A - Wireless 802.11 b/g Network Camera Manuel utilisateur

Panasonic

Panasonic WVCS564 - COLOR CCTV CAMERA Manuel utilisateur

Panasonic

Panasonic WV-NS202 - i-Pro Network Camera Manuel utilisateur

Panasonic

Panasonic WVNP1000 - NETWORK CAMERA Manuel utilisateur

Panasonic

Panasonic KX-HNC200 Manuel utilisateur

Panasonic

Panasonic AKHC910 - 1080I CAMERA Manuel utilisateur

Panasonic

Panasonic WV-SW458 Manuel utilisateur

Panasonic

Panasonic VL-CM851BX Manuel utilisateur

Panasonic

Panasonic WV-SF135 Manuel utilisateur

Panasonic

Panasonic GPUS932CU - 3CCD COLOR CAMERA CCU Manuel utilisateur

Panasonic

Panasonic BL-WV10A Manuel utilisateur

Panasonic

Panasonic i-Pro WV-SW355 Manuel utilisateur

Panasonic

Panasonic BB-HNP15 Manuel d'utilisation

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur