Panasonic KX-HCM10 Manuel utilisateur
Please read this manual before using and save this manual for future reference.
Panasonic Network Camera Site: http://www.panasonic.com/netcam
for customers in the USA or Puerto Rico
Operating Instructions
2
Additional Feature table
The features described below are added in accordance with our modifications in
the product specifications. Read both Operating Instructions manuals before
starting to use the product.
Additional Feature Page
Viewing Buffered Image Screen
Images can be buffered in the internal memory of the Network
Camera. They can be viewed by clicking [Start Capture] on
Capture screen. Alarm/Timer mode in the Image Transfer on
page 12 can also buffer images.
Page 4—Page 5
Viewing still images on your mobile phone
Acompatiblemobilephoneallowsyou toviewstillimagesover
the Internet aswell as control the motionand zoom settings of
the camera (depends on model).
Page 6—Page 7
Some changes in the look of the Network window
(KX-HCM250 and KX-HCM270 only)
The Network Camera has some changes in the look of the
Network window: two modifications and two additions.
Page 8—Page 9
Adjusting Clock for Daylight Saving Time
Adjust Clock for Daylight Saving Time is added on Name/
Time window.
Page 10
Time Zone at Auto Adjustment
The Daylight Times in the pull-down menu for the Time Zone
at [3. Auto Adjustment] on Name/Time window have been
deleted.
Page 11
Transferring Camera Images
The Network Camera can buffer images and send them via E-
mail or FTP by configuring Image Transfer. Capture, Alarm
and Timer can be used simultaneously by checking [Enable]
for Controls on each of their Image Transfer windows.
Page 12—Page 14
Using the Preset Control (Except KX-HCM8)
Pan/Tilt/Preset Control on the Camera Setup window is
divided into two controls: Pan/Tilt Control and Preset Control.
Preset Control can be enabled or disabled independently.
Page 15
Operating Instructions
3
Note
HCM logos on all window backgrounds are deleted.
Digital Zoom (KX-HCM280 only)
The 2x digital zoom feature is added. The Network Camera
hasa 42x magnifying capacity: the 21x magnifying capacity of
the optical zoom and 2x magnifying capacity of the digital
zoom.
Page 16
Using the Color Night View (KX-HCM280 only)
The Color Night View of the Network Camera enables you to
view color images of objects even in the dark.
Page 17
Default Setting List ............................................................ Page 18
Additional Feature Page
Operating Instructions
4
Viewing Buffered Image Screen
Images can bebuffered in the internal memory of the Network Camera. They can
be viewed by clicking [Start Capture] on Capture screen. Alarm/Timer mode in
the Image Transfer on page 12 can also buffer images.
The look of Buffered Image on the operation bar differs depending on the setting
for Trigger Setting on Image Transfer window. The names of enabled trigger
settings will be displayed as follows. Refer to page 12 about the Image Transfer
feature.
The screen differs depending on
clicking [Alarm] or [Timer] on
the operation bar.The screen
on the left shows Alarm.
The current images will be
buffered in the internal memory
of the Network Camera.
Added
Capture, Alarm and
Timer are all enabled.
Capture alone
is enabled.
Operating Instructions
5
Notes
• The refresh interval becomes longer as more clients access the
Network Camera.
• The image resolution, image quality and object situation affect the
number of frames in the buffered image.
• If internal memory is filled after clicking [Start Capture], the image
buffering will stop automatically.
• If [Start Capture] is clicked again, buffered images will be all erased,
and new images will be buffered in the internal memory.
• If [Start Capture] is started on one PC while viewing buffered images
on another, the images will be overwritten.
• The internal memory will be divided by the number of trigger settings in
Image Transfer. If all three trigger settings are enabled, the Network
Cameracanbufferapproximately26frames(KX-HCM8/KX-HCM10)or
186 frames (KX-HCM230/KX-HCM250/KX-HCM270/KX-HCM280) for
each trigger setting at a resolution of 320 x 240 in standard.
[Start Capture] : The images will be buffered in the internal memory of the
Network Camera. Network traffic, PC performance,
image quality and image resolution influence playing
duration time and the refresh interval of the image. The
resolution is the same as the current image settings. At a
resolution of 320 x 240 in standard, the Network Camera
buffers approximately 80 frames (KX-HCM8/KX-HCM10)
or 560 frames (KX-HCM230/KX-HCM250/KX-HCM270/
KX-HCM280).
[Primary] :[Primary] enables you to view the buffered image in the
primary time in the Alarm/Timer mode.
[Secondary] :[Secondary] enables you to view the buffered image in
the secondary time in the Alarm/Timer mode.
Operating Instructions
6
Viewing still images on your mobile phone
A compatiblemobile phone allows you toviewstill images over theInternet aswell
as control the motion and zoom settings of the camera (depends on model).
Enter"http://IP address (or URL):Port No./mobile" on a mobile phone and press
[OK]. (e.g., http://bob.viewnetcam.com:60001/mobile would show a camera
connected on port 60001.) A still image appears. Motion images cannot be
displayed.
(When the port number is set to 80 [default], it is not required.)
Registered presets 5-8 are available by activating the lin
on the mobile phone screen.
Pressing 1, 3, 7 or 9 on the keypad allows you to use
the first four registered preset positions (Preset 1, 2, 3
and 4).
Pressing 2, 4, 6 or 8 on some phones allows you to
pan and tilt a Network Camera in four directions:
Left, Up, Down and Right.
Tele button
( )
zooms in, and Wide button (#) zooms out
(KX-HCM280 only).
Pressing 5 will refresh the image.
160x120 resolution is displayed at the first access.
Pressing 0 switches the resolution to 320x240.
On certain compatible phones, the keypad has been
linked to the hyperlinks on the web page.
Added
Operating Instructions
7
Notes
• Dialing numbers(1),(3),(7)and(9)aredisplayedinascendingorder.Thelinks
for fifth to eighth preset images are displayed only with their preset names and
not with dialing numbers.
• KX-HCM10,KX-HCM230,KX-HCM250andKX-HCM270cannotuseTeleand
Wide.
• KX-HCM8 can control only Refresh and Resolution.
• Some mobile phones are not compatible with Panasonic Network Cameras.
Some phones may allow viewing only on port number 80, and some may not
support password authentication. Refer to the Network Camera Technical
Support Site at http://panasonic.co.jp/pcc/en/ for a list of mobile phone
models, and the compatibility level which has been verified with the Panasonic
Network Camera.
• Some mobile phones cannot display 320 x 240 resolution depending on their
models. Refer to the Network Camera Technical Support Site at
http://panasonic.co.jp/pcc/en for the models that Panasonic has verified
with the Network Camera.
• Some mobile phones display images not at the specified resolution but at a
decreased size.
• When Pan/Tilt/Zoom operation reaches the end, the keypad number and the
character disappear.
"(4)L" disappears.
Operating Instructions
8
Some changes inthe look of the Network window
(KX-HCM250 and KX-HCM270 only)
DisclosingOperatingInstructions of wirelessmodelsfrom this page
is strictly prohibited by export controls.
Please call Panasonic Customer Support(1-800-272-7033) for assistance.
We apologize for any inconvenience this may cause.
Added
Modified
Modified
OperatingInstructions
9
Disclosing Operating Instructions of wireless models from this page
isstrictly prohibited by export controls.
Please call Panasonic Customer Support(1-800-272-7033) for assistance.
Added
Operating Instructions
10
Adjusting Clock for Daylight Saving Time
Adjust Clock for Daylight Saving Time is added on Name/Time window.
Instructions for the data field
Adjust
Clock for
Daylight
Saving
Time
During Daylight Saving Time, the clock will shift one hour
forward at the set time on the Start Day, and move back one
hour at the set time on the End Day.
Note
An "s" is put between date and time of time stamp when
enabling Adjust Clock for Daylight Saving Time. The
time stamp will be attached to the transferred images by
Image Transfer feature.
Added
Autres manuels pour KX-HCM10
7
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels Panasonic Caméra de sécurité
Panasonic
Panasonic WV-CW594A Manuel utilisateur
Panasonic
Panasonic BB-HCM701CE Manuel d'utilisation
Panasonic
Panasonic WV-SBV131M Manuel utilisateur
Panasonic
Panasonic WVCP160 - COLOR CCTV CAMERA Manuel utilisateur
Panasonic
Panasonic WV-CP620 Manuel utilisateur
Panasonic
Panasonic WV-SF549 Manuel utilisateur
Panasonic
Panasonic BB-HCM705A - Fixed MP H.264 Dome POE Indoor Network... Manuel utilisateur
Panasonic
Panasonic BB-HCM547A Manuel utilisateur
Panasonic
Panasonic WV-CP240EX Series Manuel utilisateur
Panasonic
Panasonic Super Dynamic III WV-NS202A Manuel utilisateur
Panasonic
Panasonic OneHome BB-HCM331A Manuel utilisateur
Panasonic
Panasonic BL-VP104W Manuel utilisateur
Panasonic
Panasonic HomeHawk WINDOW Manuel utilisateur
Panasonic
Panasonic WV-CP290 series Manuel utilisateur
Panasonic
Panasonic WV-CP630G Manuel utilisateur
Panasonic
Panasonic WVNM100 - NETWORK COLOR CAMERA Manuel utilisateur
Panasonic
Panasonic WVCP120 - COLOR CCTV CAMERA Manuel utilisateur
Panasonic
Panasonic GP-KR511 Manuel utilisateur
Panasonic
Panasonic WV-S4576L Guide d'installation
Panasonic
Panasonic OneHome KX-HCM110A Manuel utilisateur
