Panasonic CV-CPW100 Series Manuel utilisateur

HD Analog Camera

User’s Manual

Model No. CV-CPW101AL

Version 1.0.0

Table of Contents

1General Introduction ..................................................................................................................1

1.1 Overview........................................................................................................................1

1.2 Features.........................................................................................................................1

1.3 Specifications................................................................................................................2

2Device Framework .....................................................................................................................3

3Installation....................................................................................................................................5

4Menu.............................................................................................................................................7

4.1 Settings ..........................................................................................................................7

4.2 Menu Operation............................................................................................................7

Welcome

Thank you for purchasing our HD analog camera!

This user’s manual is designed to be a reference tool for your system.

Please read the following safeguard and warnings carefully before you use this series product!

Please keep this user’s manual well for future reference!

Important Safeguards and Warnings

1．Electrical safety

All installation and operation here should conform to your local electrical safety codes.

The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited

power source is rated DC 12V in the IEC60950-1. (Power supply requirement is subject to the device

label).

Please install easy-to-use device for power off before installing wiring, which is for emergent power off

when necessary.

Please check if the power supply meets the requirements of working voltage of the camera before

operating the device (The material and length of the power supply cable will influence terminal voltage

value).

Please prevent the line cord from being trampled or pressed, especially the plug, power socket and the

junction from the device.

We assume no liability or responsibility for all the fires or electrical shock caused by improper handling

or installation.

2．Environment

Please don’t aim the device at strong light (such as lighting, sunlight and so on) to focus.

Please transport, use and store the device within the range of allowed humidity and temperature.

Please do not allow water and other liquid falling into the camera in case that the internal components

are damaged.

Please keep the sound ventilation in case of heat accumulation.

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

Please pack the device with standard factory packaging or material with same quality when transporting

the device.

It is recommended to use the device together with lightning protection device to enhance lightning

protection effect.

It is recommended to GND the device to enhance device reliability.

It is advised to use qualified video transmission cable to improve video quality.

3．Daily Maintenance

Please shut down the device and then unplug the power cable before you begin daily maintenance

work.

Use the dry soft cloth to clean the device.

If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean

the device. Finally use the dry cloth to clean the device.

Please put the dustproof cap to protect the CMOS component when you do not use the camera.

iii

Warning

Please use the standard accessories provided by manufacturer and make sure the device is installed

and fixed by professional engineers.

Please prevent the device surface from the radiation of laser beam when using laser beam device.

Please do not provide two or more power supply modes for the device, otherwise it may cause damage

to the device.

Statement

Please refer to the actual product for more details; the manual is just for reference.

The manual will be regularly upgraded according to the product update; the upgraded content will be

added in the manual without prior announcement.

Please contact the customer service for the latest procedure and supplementary documentation.

The company is not liable for any loss caused by the operation which is not followed by the manual.

Please refer to the company’s final explanation if there is any doubt or dispute.

1General Introduction

1.1 Overview

This series HD analog camera conforms to the HDCVI standard. It supports video signal high-speed

long distance transmission without any delay. It can be controlled by the DVR conforming to the

HDCVI.

1.2 Features

High-performance CMOS image sensor.

Support 720p@25fps (PAL)/ 30fps (NTSC)

Support 75-5 coaxial cable transmission up to 800m.

High speed & long distance real-time transmission.

Support ICR for day time and night time operation.

Support auto exposure, auto white balance, auto electronic shutter and auto gain

function.

Support DC12V power supply.

IP66 compliance.

1.3 Specifications

Parameter

CV-CPW101AL

Camera

Image Sensor

1/3" 1.0 Mega Pixels CMOS

Effective Pixels

1280 (H) x 720 (V)

Min Illumination

0.05Lux/ F1.3, 0Lux IR on

Electronic Shutter

PAL : 1/25s~1/100,000s

NTSC: 1/30s~1/100,000s

Video Frame Rate*

PAL : 25fps

NTSC: 30fps

Synchronization

Internal

Day & Night

Auto (ICR)/ Color/ B/W

Max IR Distance

30m

Digital Noise Reduction

White Balance

Auto

AGC

Auto

BLC

Auto

Lens

Focal Length

2.7-13.5mm

Angular Field of View

H: 27.6° (Tele) ~ 89° (Wide)

V: 16.2° (Tele) ~ 48° (Wide)

Lens Type

M12

Input / Output

Video Output

1CH BNC HD-CVI video output

General

Power

DC 12V±25%

Power Consumption

3W MAX

Working Temperature

-40℃~+60℃.

Less than 90% RH (no condensation)

Dimensions

Φ 90.4 mm × 213.0 mm

Weight (approx.)

550g

External Case

Metal

*Refer to DVR spec sheet for recording frame rate limitation

2Device Framework

Please refer to the following figures for dimension information. The unit is mm.

Figure 2-1

Figure 2-2

Figure 2-3

3Installation

Important

Before the installation, please make sure the installation surface can sustain at

least 3X weight of the bracket and the camera.

Figure 3-1

Step 1

Take out the camera cable through cable exit of the bracket chassis and install camera

bracket. If it is cement wall, you need to install expansion bolt first (the installation hole of

expansion bolt need to be in accordance with the bracket), then use self-tapping bolt to

install bracket, which is shown in Figure 3-1.

If it is wooden wall, you can skip the first step and use self-tapping bolt to install bracket

directly.

Step 2

Unscrew the M3×20 and M3×5 screws on the bracket in the direction shown in Figure 3-2,

adjust the camera to an exact location which needs to be monitored by rotating the bracket

and camera body, then secure the bolts.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Panasonic Caméra de sécurité

Panasonic

Panasonic BB-HCM531A - Network Camera Manuel utilisateur

Panasonic

Panasonic WV-CZ362E Manuel utilisateur

Panasonic

Panasonic BB-HCM581CE Manuel utilisateur

Panasonic

Panasonic KX-HNC600E Manuel utilisateur

Panasonic

Panasonic WVNS954 - NETWORK CAMERA Manuel utilisateur

Panasonic

Panasonic WVBF102 - CCTV CAMERA Manuel utilisateur

Panasonic

Panasonic BB-HCM547 Manuel d'utilisation

Panasonic

Panasonic WV-CS580/G Manuel utilisateur

Panasonic

Panasonic WV-SW158 Manuel utilisateur

Panasonic

Panasonic Super Dynamic III WV-CP480 Manuel utilisateur

Panasonic

Panasonic WV-SW598A Manuel utilisateur

Panasonic

Panasonic KX-HNC710W Manuel utilisateur

Panasonic

Panasonic WV-NS202AE Manuel utilisateur

Panasonic

Panasonic K-EF134L03E Manuel utilisateur

Panasonic

Panasonic AWE860 - COLOR CAMERA Manuel utilisateur

Panasonic

Panasonic WV-SW316 Manuel utilisateur

Panasonic

Panasonic Super Dynamic III WV-NS202A Manuel utilisateur

Panasonic

Panasonic WVCS574 - COLOR CCTV CAMERA Manuel utilisateur

Panasonic

Panasonic WV-CP500 series Manuel utilisateur

Panasonic

Panasonic WV-SF138 Manuel d'installation et d'exploitation

Panasonic

Panasonic GP-MF602 Manuel utilisateur

Panasonic

Panasonic WV-CLR920A Manuel utilisateur

Panasonic

Panasonic BB-HCM547 Manuel d'instructions d'installation

Panasonic

Panasonic WV-BS500 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur