Panasonic BL-C10A - Network Camera - Pan Manuel utilisateur

Additional Feature table

The following features are added to the camera. Read both Operating Instructions

manuals before starting to use the product.

Additional Features Contents Page

Banner can be displayed

(Added to page 10 of the

Operating Instructions on the

Setup CD-ROM.)

When the camera accesses the

Internet, the banner displays product

information about cameras or

announcements about the latest

firmware, etc. from Panasonic..

page 2

Banner can be set

(Added to page 47 of the

Operating Instructions on the

Setup CD-ROM.)

When checked, the banner is displayed

for administrator or general users or

both.

page 3

Save button is added on the

Buffer/Transfer page

(Added to page 51 and page 58 of

the Operating Instructions on the

Setup CD-ROM.)

You can change the trigger enable/

disable setting of the buffer/transfer

feature.

page 4

Sensor deactivation after initial

detection

(Added to page 61 of the

Operating Instructions on the

Setup CD-ROM.)

You can set sensor deactivation time

during which the sensor does not work

in order not to send too many E-mails

to a mobile phone.

page 5

Turn the indicator on during the

sensor reaction

(Added to page 69 of the

Operating Instructions on the

Setup CD-ROM.)

You can set indicator to light orange

during the sensor reaction.

page 6

Operating Instructions (Additional Features)

Model No. BL-C10A

Network Camera

Operating Instructions (Additional Features)

Banner can be displayed

When the camera accesses the Internet, the banner displays product information

about cameras or announcements about the latest firmware, etc. from Panasonic.

1. Access the camera (see page 8 of the Operating Instructions on the Setup CD-

ROM).

• The Top page is displayed.

2. Click the [Single] tab at the top of the page.

When the camera is accessed,

a banner can be displayed

below the image. The banner

announces firmware updates

and new product announcements.

It can be configured so that it is

seen by the Administrator or

General User or both.

It can be also disabled.

Operating Instructions (Additional Features)

3[For assistance, please call: 1-800-272-7033]

Banner can be set

When checked, the banner is displayed for administrator or general users or both.

Setting Description

Banner Display • When the user accesses the camera, the banner

displays firmware updates or new product

announcements. Checking [Display] for Administrator

is particularly recommended.

• When checked, the banner is displayed for

administrator or general users or both.

• The banner is displayed only on the Single Camera

page (see page 2).

Banner can be set.

Operating Instructions (Additional Features)

Save button is added on the Buffer/Transfer page

You can change the trigger enable/disable setting of the buffer/transfer feature.

1. Click [Buffer/Transfer] on the Setup page.

2. Click [No.] to enable buffer/transfer.

• Trigger setting page is displayed.

Clicking [Save] saves the settings.

The buffered images are deleted.

You can change the trigger enable/disable setting.

Operating Instructions (Additional Features)

5[For assistance, please call: 1-800-272-7033]

Sensor deactivation after initial detection

You can set sensor deactivation time during which the sensor does not work in

order not to send too many E-mails to a mobile phone.

Setting Description

Sensor

deactivation

time setting

• Set the time period during which the sensor does not work

after detection. This function is recommended to use not to

send too many E-mails to a mobile phone.

• Sensor transfer stops its operations until the camera

finishes all transfers. For example, if the camera transfers

3 images per minute and 6 images in total with setting 1

minute of sensor deactivation time, the sensor will be in the

following operation.

Note

Since the camera cannot buffer images during sensor

deactivation time, the images before detection also cannot

be buffered. For example, if you set "1 image per second

and totally 10 images before detection" and the sensor

detect the heat changes right after the previous detection,

the images are not buffered. If 10 seconds pass after the

sensor deactivation time ends, images can be buffered as

you set.

Set the time for the

sensor not to work

after detection.

Detectable UndetectableUndetectable

1st 2nd 3rd 4th 5th 6th

120 seconds

A heat change occurs.

Detectable

Sensor

deactivation

time

1 minute

Operating Instructions (Additional Features)

Turn the indicator on during the sensor reaction

You can set indicator to light orange during the sensor reaction.

• If the sensor detects temperature changes, the indicator lights orange

despite the image buffer/transfer feature. You can recognize the sensor

detection range while seeing the indicator.

Make the indicator light orange during sensor reaction.

Operating Instructions (Additional Features)

7[For assistance, please call: 1-800-272-7033]

Default Setting List

Items Default Required Notes

Image

Display

Banner Display

Administrator Checked - -

General User Checked - -

Buffer/

Tr an s fe r

Sensor deactivation

time setting

appointment

When you set

sensor

transfer

No appointment,

10, 30 (s), 1, 3, 5,

10 (min)

Panasonic Consumer Electronics Company,

Division of Panasonic Corporation of North America

PSQX3504YA KK0904RM1035

2004

Panasonic Communications

Panasonic Puerto Rico, Inc.

The information in this document is subject to change without notice.

This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced

for internal use only. All other reproduction, in whole or in part, is prohibited without the written

consent of Panasonic Communications Co., Ltd.

Autres manuels pour BL-C10A - Network Camera - Pan

Table des matières

Autres manuels Panasonic Caméra de sécurité

Panasonic

Panasonic Super Dynamic III WV-CP480 Manuel utilisateur

Panasonic

Panasonic WV-SFR631L Manuel utilisateur

Panasonic

Panasonic WV-SFV781L Manuel utilisateur

Panasonic

Panasonic i-Pro WV-SP302 Manuel utilisateur

Panasonic

Panasonic WV-SW174W Manuel utilisateur

Panasonic

Panasonic WV-CW324LE Series Manuel utilisateur

Panasonic

Panasonic WV-SC588 Manuel utilisateur

Panasonic

Panasonic KX-HNC600AZ Manuel utilisateur

Panasonic

Panasonic WVPS15 - CAMERA DRIVE UNIT Manuel utilisateur

Panasonic

Panasonic WV-CL270 Manuel utilisateur

Panasonic

Panasonic WVCP160 - COLOR CCTV CAMERA Manuel utilisateur

Panasonic

Panasonic BL-C210A Manuel utilisateur

Panasonic

Panasonic WV-SPN531 Manuel d'utilisation

Panasonic

Panasonic EggCam GP-KR001 Manuel utilisateur

Panasonic

Panasonic AW-HE145KP Manuel utilisateur

Panasonic

Panasonic HX-A1M Instructions d'installation et d'entretien

Panasonic

Panasonic WV-SF135 Manuel utilisateur

Panasonic

Panasonic WV-BP50 Manuel utilisateur

Panasonic

Panasonic GP-KS822 Manuel utilisateur

Panasonic

Panasonic WV-S2270L Manuel d'utilisation

Panasonic

Panasonic WV-SFV631L Manuel utilisateur

Panasonic

Panasonic WVBP100 - CCTV CAMERA Manuel utilisateur

Panasonic

Panasonic WV-X5550LT Manuel utilisateur

Panasonic

Panasonic Super Dynamic III WV-CS954 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur