Panasonic WJ-NX100/2E Manuel utilisateur

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

The model number is abbreviated in some descriptions in this manual.

Installation Guide

Network Disk Recorder

Model No. WJ-NX100/2E

The Operating Instructions (PDF) is on the Panasonic support website

(https://security.panasonic.com/training_support/documentation_database/).

For professional use only

Contents

Introduction.............................................................................................................................. 4

Standard accessories ............................................................................................................................................................... 4

About the user manuals ............................................................................................................................................................4

About Secure Communication Kit (option)................................................................................................................................5

About the business intelligence function (option) ..................................................................................................................... 5

Precautions for installation........................................................................................................................................................5

Basic operations .......................................................................................................................................................................7

Setup menu...............................................................................................................................................................................9

Operations flow ..................................................................................................................... 10

1 Obtain the license (Registration Key) ............................................................................. 12

2 Installation ......................................................................................................................... 13

Vertical installation ..................................................................................................................................................................13

Wall mounting .........................................................................................................................................................................14

3 Connections ...................................................................................................................... 15

Connection of cameras, a mouse and a PC ...........................................................................................................................15

Connection of monitors ..........................................................................................................................................................16

How to use the terminals of the ALARM/CONTROL ..............................................................................................................17

ALARM/CONTROL terminal on the rear side.......................................................................................................................... 17

Connection example for emergency recording.......................................................................................................................17

Time and polarities of the ALARM/CONTROL connector.......................................................................................................20

Connection of the AC power adapter ..................................................................................................................................... 21

4 Turn on the devices........................................................................................................... 22

Turn on the power of the recorder ..........................................................................................................................................22

(When turn off the power of the recorder)...............................................................................................................................23

5 Register the license (Registration Key) .......................................................................... 24

6 Configure the minimum settings [Easy Start] ................................................................ 26

Troubleshooting..................................................................................................................... 30

Important Information

Refer to the Important Information (PDF) in the included CD-ROM for the following items.

Safety Information · Important safety instructions

Introduction · Preface · System requirements for a PC

· Network security

Precautions · Precautions for use

Major operating controls · Major operating controls and their functions

User management · User/Host management

Others · Troubleshooting

· Specifications

Operating Instructions

Refer to the Operating Instructions (PDF) on the Panasonic support website for the following items.

Setup via recorder's main

monitor

· Basic setup

Set up date & time and language [Date/Language]

Camera setup [Camera]

Set up recording/events [REC & event]

· Advanced setup

Configure the settings relating to monitors [Monitor]

Configure the settings relating to network [Network]

Configure the settings relating to the user management [User management]

Configure the settings relating to maintenance [Maintenance]

Manage the hard disk drives [HDD management]

Configure the settings relating to the extra functions [Extra function]

· Lists of the setting items

Operation via recorder's main

monitor

· Monitor live images

Operate the camera

· Event function

· Record images

· Play recorded images

· Useful functions

Copy recorded images

Play back copied images with this recorder

Operation via PC web browser · Monitor live images

Operate the camera

· Event function

· Play recorded images

· Copy and download

Copy recorded images

Download

Play back the copied/downloaded images on a PC

· Setup

Contents (continued)

Introduction

About the user manuals

There are 4 manuals provided for the WJ-NX100/2E as follows.

Installation Guide (this book): Contains procedures of how to install/connect this product with devices and

descriptions about "Easy Start".

Important Information (PDF): Contains preface, precautions, and major operating controls and their functions and

specications.

Operating Instructions (PDF): Contains descriptions of how to congure the required settings and how to operate

this product.

Refer to the Panasonic support website

(https://security.panasonic.com/training_support/documentation_database/).

Quick Reference Guide: Contains descriptions of how to operate functions frequently used.

"NX100" shown in this manual or setup menu on this recorder indicates the WJ-NX100/2E.

Refer to "readme.txt" on the included CD-ROM for further information about the dedicated software (option) that receives and

displays the event and error information, compatible cameras and their versions.

Refer to the Panasonic support website (https://security.panasonic.com/training_support/support/) for latest information about

the compatible cameras and functions to be added or changed by firmware upgrade.

The external appearance in the document may differ from the actual product within no influence range on operation due to

improvement of the product.

CD-ROM*1.................................................................................................1 pc.

Mouse ........................................................................................................1 pc.

Installation Guide ........................................................................................1 pc.

Quick Reference Guide...............................................................................1 pc.

Activation Key Card ....................................................................................1 pc.

Cable Clamp ..............................................................................................1 pc.

Power cord.................................................................................................3 pcs.

AC power Adapter......................................................................................1 pc.

Cushion rubber (large)*2..............................................................................1 pc.

Cushion rubber (small)*2.............................................................................2 pcs.

*1 The CD-ROM contains the Important Information and Quick Reference Guide (PDFs). Make sure to read them when installing

or setting the recorder.

*2 A total of 3 cushion rubbers (large)/(small) are pasted onto one sheet of backing sheet. Please peel them off before use.

Cushion rubbers are used for vertical installation.

Standard accessories

Introduction (continued)

Registering the license of the additional business intelligence kit WJ-NXF02, WJ-NXF02W (option) allows the recorder to detect

faces whose features are similar to the registered faces by comparing face images in live image with the registered face images

(face matching function). The statistical processing for the results of the face matching will also become available and it displays

the result on the main monitor connected with the recorder.

For further information, refer to the operating instruction on the following web site.

https://security.panasonic.com/training_support/documentation_database/

About the business intelligence function (option)

This product is designed to be used indoors.

Panasonic i-PRO sensing solutions Co., Ltd. assumes

no responsibility for injuries or property damage

resulting from failures arising out of improper

installation or operation inconsistent with this

documentation.

Do not place this product in the following places:

• Locations exposed to direct sunlight

• Locations subject to having strong vibration or impact

• Locations near magnetic eld sources such as a

television or speakers

• Locations near the devices that emit large sound and

generate vibration by sound pressure

• Locations where condensation forms easily, where

temperature changes greatly or where humidity level is

high

• Locations subject to steam and oil smoke such as a

kitchen

• Locations which are not level

• Locations subject to dust

• Locations where it may get wet from rain or water splash

Do not install this product in locations where the

product or the cables can be destroyed or damaged

by persons with malicious intent.

Precautions for installation

Registering a license of a secure communication kit (option) to the recorder enables secure communication* with cameras. Each

secure communication kit differs in the number of cameras that can be registered as shown in the table below. Use several

licenses as necessary.

For further information, refer to the operating instruction on the following web site.

https://security.panasonic.com/training_support/documentation_database/

* Encrypted communication using an electronic certificate

WJ-NXS01, WJ-NXS01W WJ-NXS04, WJ-NXS04W

1 camera 4 cameras

About Secure Communication Kit (option)

Introduction (continued)

Place this product horizontally on a level surface.

Do not place this product in an upright position. When

stacking multiple recorders, clear a space of more than 5 cm

{2 inches} from both sides, the top, the bottom and the rear

of the recorders.

More than

5 cm {2 inches} More than

5 cm {2 inches}

More than

5 cm {2 inches}

More than

5 cm {2 inches}

Heat dissipation

To prevent this product from overheating, heed the

following. Failure to observe this may cause fire or trouble.

• Do not block the cooling fan outlet or the ventilation holes

with a wall, rack, cloth, etc. Maintain the product

periodically to prevent dust from blocking ventilation

holes.

• The lifetime of the cooling fan is limited by use. It is

recommended to replace them after around 30000

hours of operation. Contact your dealer for replacement

of the cooling fans.

• Clear a space of more than 5 cm {2 inches} from both

sides, the top, and the rear of the product. Do not block

the ventilation holes on the front side since this product

is designed to cool the hard disk drives by drawing in air

from the front.

Avoid placing this product near noise sources

If the cables are placed near noise sources such as

fluorescent lamps, noises may be produced. In this case,

rewire avoiding the noise sources, or move the product to a

place far from the source.

Grounding

Confirm that the wire is connected from the SIGNAL GND

terminal to earth ground.

A grounding connection must be made before connecting

the power plug or this product to the main power supply.

When disconnecting the grounding wire, make sure that the

power plug of this product is disconnected from the main

power supply.

For BNC cable connection

Use only the recommended plug below when connecting the

BNC plug to the connectors on the rear panel of this product.

Applicable plug: MIL-C39012C, MIL-C39012/16F or BS

CECC2212: 1981

* Suffixes attached to the standards may be updated.

BNC cable (locally procured)

Plug (locally procured)

Tip dimensions inside the recommended BNC plug

ø1.32 mm - ø1.37 mm

{ø0.052 inches - ø0.054 inches}

ø0.13 mm - ø0.69 mm

{ø0.005 inches - ø0.027 inches}

Important:

• A compatible plug shall be used. Failure to observe this

may cause trouble such as poor contact. At worst, the

connector of this product may be damaged.

Avoid placing receptacles that contain liquids such as

water near this product.

If liquid spills onto this product, it may cause fire or an

electric shock.

Shielded (STP) LAN cables must be used with this unit

to ensure compliance with EMC standards. (Excluding

U.S.A. and Canada)

About sulfuration of rubber products

Do not leave rubber products containing sulfur (packing and

rubber feet) close to the recorder or in the same storing box.

Sulfur constituent from the rubber products may cause

sulfuration corrosion on electrical parts or terminals and

defects in the recorder.

Display method of the setting screen

Click the [Setup] button.

→ The top screen of the setup menu will be displayed.

Connection of a mouse

Connect the included mouse to the mouse connection port

on the rear side of the recorder.

→ The mouse cursor will be displayed on the main monitor.

Mouse operation

Left-click the desired buttons and tabs on the screen.

(Hereinafter, "Left-click..." will be described as "Click..." in

this document.)

When the entry field has the [▲] and [▼] buttons or the [▼]

button, the setting value can be changed using the mouse

wheel.

When no operation is made for 10 seconds or more, the

mouse cursor will be hidden. The mouse cursor will be dis-

played again when the mouse is moved.

This section explains operation of a mouse and the soft keyboard, and setting screen only.

The recorder can be operated using the mouse (included) connected to the mouse connection port either on the front or the rear

side of the recorder.

It is also possible to perform settings and some operations of the recorder from the web browser. Refer to the Operating

Instructions (PDF) for descriptions of how to operate from the web browser and the configurable settings using the web browser.

Basic operations

Introduction (continued)

About the operation of on-screen keyboard

Use the on-screen keyboard to enter characters for the setting items. When clicking the [ ] icon beside the entry field, the on-

screen keyboard will be displayed, and it will become possible to enter characters by clicking the character keys on the key-

board.

On-screen keyboard screen

[Del all] button

Deletes all the characters in the entry field.

[←]/[→] button

Move the cursor in the entry field to either direction.

[Delete] button

Deletes a character pointed by the cursor in the entry field.

[A/a] button

This button changes the characters to be entered between

capital letters and small letters.

[Next] button

Changes the keys to be displayed for character entry.

The displayed keys are changed as follows:

Keys for the language selected by the language selec-

tion pull-down menu →Combination characters →

Special characters

[Enter] button

Determines the entered characters and closes the on-screen

keyboard.

Note:

• Basic operations are also applied to the "Login" window

and registration window for license.

• Click the [×] button to close the window without deter-

mining the entered characters.

Entry field

Language selection pull-down menu

Click the [▼] button to select the language

for character entry.

Introduction (continued)

Configuration of each setting item in the setup menu should be completed in advance to use this recorder.

The setup menu has the following levels for the setting items. On "Easy Start", the minimum settings required to operate the

recorder will be performed, but other settings will remain default. On the [Basic setup] or [Advanced setup] page, the settings can

be customized in accordance with a variety of operational modes.

The following is the example of the setup menu that describes the features and operations.

The setup menu will be displayed when clicking the [Setup] button (☞Page 7) at the upper right corner of the operational screen

on the main monitor.

The buttons of the setup pages will be displayed on the left column of the setup menu.

Setup menu

➀[Home] button

It is possible to return to the top screen (☞Page 7) of

the setup menu from any setup page.

➁Setup menu panel

Displays buttons of the setup pages.

➂[Easy Start] button

It is possible to configure the minimum settings required

to operate the recorder, such as date & time and cam-

era registration.

➃[Basic setup] – Setup page buttons

Each "Basic setup" page will be displayed.

➄[Advanced setup] button

The buttons to open the corresponding setup pages of

the "Advanced setup" menu will be displayed. When

clicking this button again, the buttons will be hidden.

➅[Advanced setup] – Setup page buttons

Each "Advanced setup" page will be displayed.

➆Hierarchical display

The name of the current setup page will be displayed in

the hierarchy. The tab name will also be included.

➇Setup page

Displays each setup page. If the current setup page is

composed of two or more tabs, it is possible to change

the page display by clicking the tabs.

➈[Exit] button

Applies the settings to the recorder and closes the setup

menu to return to the operational screen (☞Page 11).

Except for some cases, the descriptions of this document

follow the hierarchical display and setup pages.

Important:

• If the settings are applied, all login users will be forcibly

logged out.

Introduction (continued)

➀

➁

➃

➂

➄

➅

➇

➆

➈

1Obtain the license (Registration Key)

☞Page 12 and Activation Key Card

2Installation

☞Page 13

3Connections

☞Page 15

4Turn on the devices

☞Page 22

5Register the license (Registration Key)

☞Page 24

Obtain the "Registration Key" of the recorder by following the

instructions on the included Activation Key Card. To use the

secure function or the business intelligence function, get the

registration key of the additional license according to the

appropriate Additional Kit (option). The obtained

"Registration Key" will be used in Step 5.

Install the recorder on a wall.

When using it flat without installation, go to Step 3.

Connect the camera and monitor to this product.

Turn on the power to launch in the following order.

①Turn on the power of the camera and the monitor.

②Turn on the power of the recorder.

Important:

• Be sure to register the "Registration Key" of the recorder.

If the "Registration key" of the recorder is not registered,

the Additional Kit cannot be registered.

After registration, click [Restart] button on the license

registration screen to reboot the recorder and activate the

license.

• The main monitor is required for the settings.

* The settings can be done through a web browser on the PC (Refer to the Operating

Instructions (PDF)).

• The PC is required for reading the Important Information, the Operating Instructions

(PDF) and camera settings.

Operations ow

Autres manuels pour WJ-NX100/2E

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Panasonic Instrument de mesure

Panasonic

Panasonic WJ-NV300K/GJ Manuel utilisateur

Panasonic

Panasonic TH13 Series Manuel utilisateur

Panasonic

Panasonic KW1M Eco-Power METER Manuel utilisateur

Panasonic

Panasonic WJHD500 - DIGITAL DISC RECORDE Manuel utilisateur

Panasonic

Panasonic LH2H preset Manuel utilisateur

Panasonic

Panasonic LP-V10U-C Manuel utilisateur

Panasonic

Panasonic NV-8950 Manuel utilisateur

Panasonic

Panasonic LC2H preset Manuel utilisateur

Panasonic

Panasonic LP-GS Series Manuel utilisateur

Panasonic

Panasonic k-nl304k Manuel utilisateur

Panasonic

Panasonic RS-790S Manuel utilisateur

Panasonic

Panasonic KW2G Eco-POWER METER Manuel utilisateur

Panasonic

Panasonic KW2M-A Manuel utilisateur

Panasonic

Panasonic DMRE20 - DVD VIDEO RECORDER Manuel utilisateur

Panasonic

Panasonic KW2M Manuel utilisateur

Panasonic

Panasonic K-NL316G Manuel utilisateur

Panasonic

Panasonic k-nl304k Manuel utilisateur

Panasonic

Panasonic AG-HPG20P Manuel technique

Panasonic

Panasonic ShowStopper PV-SS2710 Manuel utilisateur

Panasonic

Panasonic LP-400 Series Manuel d'utilisation et d'entretien

Panasonic

Panasonic VP-7722A Manuel utilisateur

Panasonic

Panasonic KC2S Eco-COUNT METER Manuel utilisateur

Panasonic

Panasonic WJHD309 - DIGITAL DISK RECORDER Manuel

Panasonic

Panasonic Omnivision VHS PV-7453 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur