Panasonic EY75A2 Manuel utilisateur

distribution is a violation of law.

Order Number PTD1211X11CE

Cordless Impact Driver

Model No. EY75A2

Europe

Oceania

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 7

5 Wiring Connection Diagram ---------------------------------12

6 Schematic Diagram ---------------------------------------------12

7 Exploded View and Replacement Parts List -----------13

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3 Troubleshooting Guide

3.1. Troubleshooting Guide (Refer to Wiring Connection Diagram)

3.2. Trial Operation (after checking Troubleshooting Guide)

3.2.1. Assembly

• Confirm if there is no gap between housing A and B by pinching lead wires.

• There is no dust or deformation on battery terminals.

• Confirm if there is no dirt when repairing.

3.2.2. Operation

• Check whether the tool operates properly in both the forward and reveres directions.

• Check whether the LED light turns on and off each time the LED light on/off button is depressed.

• Check whether the tool speed increases continuously as the trigger is gradually engaged.

• Check whether the tool speed is normal after repair and reassembly.

High mode: 0 to 2,500 rpm

Medium mode: 0 to 1,400 rpm

Low mode: 0 to 1,000 rpm

• Check whether impact operation functions properly.

Check whether impact operation functions properly.

For an easy test of impact operation, check whether you can drill a universal screw (φ4.5X75mm) into a substrate Douglas fir

within about 5 seconds.

3.2.3. Integrity

• With the switch activated, shake the tool back and forth and up and down and verify that its sound does not change excessively.

• Check for the presence of any dirt or foreign matter from the repair process on the outside of the tool.

4 Disassembly and Assembly Instructions

*To assemble the tool, start with 4-6 and proceed to 4-1

4.1. Removing the Housing

4.2. Removing the Assemblies

4.3. Removing the Motor Mounting Plate, Driving Shaft Assembly, and Fixa-

tion Cover Assembly from the Motor Assembly

4.4. Removing the Fixation assembly, Driving shaft assembly, and Motor

Mounting Plate

4.5. Removing the Motor Assembly, Switch Assembly, and Module assembly

4.6. Precautions When Assembling the Motor Assembly, Switch Assembly,

and Module Assembly

Table des matières

Autres manuels Panasonic Moteur à percussion

Panasonic

Panasonic EYFPA1J Manuel utilisateur

Panasonic

Panasonic EY6506-U1 Manuel utilisateur

Panasonic

Panasonic EY7202 - 12V IMPACT DRIVER Manuel utilisateur

Panasonic

Panasonic EYFLB1A Manuel utilisateur

Panasonic

Panasonic EY76A1 Manuel utilisateur

Panasonic

Panasonic EY7430 Manuel utilisateur

Panasonic

Panasonic EY7530 Manuel utilisateur

Panasonic

Panasonic EY75A7 Manuel utilisateur

Panasonic

Panasonic EY75A1 Manuel utilisateur

Panasonic

Panasonic EYFLA6PR Manuel utilisateur

Panasonic

Panasonic EY7201-X8 Manuel utilisateur

Panasonic

Panasonic EY7202 - 12V IMPACT DRIVER Manuel utilisateur

Panasonic

Panasonic EY7270-X8 Manuel utilisateur

Panasonic

Panasonic EY7541 - CORDLESS IMPACT WRENCH Manuel utilisateur

Panasonic

Panasonic EY7540 - IMPACT DRIVER 14.4V Manuel utilisateur

Panasonic

Panasonic EYFLA3J - DRILL - MULTI LANGUAGE Manuel utilisateur

Panasonic

Panasonic EY6506-U1 Manuel utilisateur

Panasonic

Panasonic EYF581-U1 Manuel utilisateur

Panasonic

Panasonic EY7546LR2S Manuel utilisateur

Panasonic

Panasonic EY75A1 Manuel utilisateur

Panasonic

Panasonic EY75A1 Manuel utilisateur

Panasonic

Panasonic EY7206GQW Manuel utilisateur

Panasonic

Panasonic EY75A7 Manuel utilisateur

Panasonic

Panasonic EY7552 Manuel utilisateur

Manuels Moteur à percussion populaires d'autres marques

stayer

stayer IW500D Manuel utilisateur

Makita

Makita DTD152 Manuel utilisateur

Milwaukee

Milwaukee M12 FID Manuel utilisateur

Grizzly

Grizzly H6140 Manuel utilisateur

Makita

Makita BTW450 Manuel utilisateur

Ozito

Ozito LID-3000 Manuel utilisateur

Astro Pneumatic Tool

Astro Pneumatic Tool 1812 Manuel utilisateur

Greenlee

Greenlee HW3 Manuel utilisateur

Sthor

Sthor 57091 Manuel utilisateur

Makita

Makita DTD145 Manuel utilisateur

Hilti

Hilti SIW 2-A12 Manuel utilisateur

Ryobi

Ryobi R18IW3 Manuel utilisateur

Parkside

Parkside PDSSA 20-Li A1 Manuel utilisateur

Flex

Flex FX1471 Manuel utilisateur

SATA

SATA 51075C Manuel technique

Cembre

Cembre NR-11P Manuel utilisateur

Makita

Makita BTP131RFE Manuel utilisateur

DeWalt

DeWalt XR Li-ion DCF902 Manuel utilisateur