Panasonic ER?GB50 Manuel utilisateur

© Panasonic Electric Works Co., Ltd. 2010.

All rights reserved. Unauthorized copying and distri-

bution is a violation of law.

Order Number SD1010A67CE

AC/Rechargeable Hair Clipper

Model No. ER-GB50

Asia

Middle East

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 4

5 Wiring Connection Diagram ---------------------------------- 8

6 Schematic Diagram ---------------------------------------------- 9

7 Exploded View and Replacement Parts List -----------10

2

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3

3 Troubleshooting Guide

4

4 Disassembly and Assembly Instructions

4.1. Disassembly Instructions

1. Remove the blade.

2. Insert a slotted screwdriver into the slit of dial cover firmly

and raise it with the driver.

NOTE :

Make sure there is NO scratch or damage on the

parts.

3. Loosen a screw and take out the dial with the dial mount-

ing base.

5

4. Loosen two screws.

5. Remove the housing C.

6. Loosen a screw.

7. Insert a slotted screwdriver under the front panel, then

raise the front panel with the driver slightly.

6

8. Loosen 8 screws and remove the housing A.

9. Loosen 2 screws and remove the module assembly with

rechargeable battery first, then remove the motor holder.

7

4.2. Assembly Instructions

For assembly, reverse the order of disassembly.

1. Insert the rechargeable battery into the battery holder.

NOTE:

Make sure to attach the washer and O-ring to the bat-

tery terminal. The O-ring for the battery terminal is the

thickest. Confirm if the O-ring is attached properly.

• Battery terminal : washer x 1and O-ring x 1

• terminal pins: o-ring x 1

2. Set the motor holder first, then set the module assembly

with rechargeable battery.

NOTE:

Make sure that two motor lead wires are set within the

space between the battery holder and the motor

holder to prevent pinching.

NOTE:

Make sure to attach the switch cam with the lowest

position.

Apply the grease (G741S) on the housing O-ring.

3. Fix the motor holder in housing A with two screws.

NOTE:

Make sure that two O-rings are set.

4. Set the front panel.

NOTE:

Hook the bottom side first and fix the front panel.

Make sure to set the switch handle to the "0" position.

5. Set the click spring.

8

6. Set the housing C.

NOTE:

Make sure to set the rack.

Insert the hook of housing C under the front panel

first.

7. Fix the dial and the dial mounting base by a screw.

NOTE:

Make sure to set the slit at left side.

Apply the grease (G741S) on the gear of dial.

5 Wiring Connection Diagram

9

6 Schematic Diagram

Model No. : ER-GB50 Exploded View

7 Exploded View and Replacement Parts List

Autres manuels pour ER?GB50

1

Table des matières

Autres manuels Panasonic tondeuse à cheveux

Panasonic

Panasonic ER-HGP90 Manuel utilisateur

Panasonic

Panasonic ER-GC70 Manuel utilisateur

Panasonic

Panasonic ER-GP707 Manuel utilisateur

Panasonic

Panasonic ER-GC30 Manuel utilisateur

Panasonic

Panasonic ER-GC70 Manuel utilisateur

Panasonic

Panasonic ER-GC71 Manuel utilisateur

Panasonic

Panasonic ER-GS60 Manuel utilisateur

Panasonic

Panasonic ER-GP30 Manuel utilisateur

Panasonic

Panasonic EH-KA81 Manuel utilisateur

Panasonic

Panasonic ER131 Manuel utilisateur

Panasonic

Panasonic ER1420 Manuel utilisateur

Panasonic

Panasonic ER1421 Manuel utilisateur

Panasonic

Panasonic ER-GC50 Manuel utilisateur

Panasonic

Panasonic ER-GP22 Manuel utilisateur

Panasonic

Panasonic ER154-E8 Manuel utilisateur

Panasonic

Panasonic ER-SC60 Manuel utilisateur

Panasonic

Panasonic ER-GP21 Manuel utilisateur

Panasonic

Panasonic ER-GC71 Manuel utilisateur

Panasonic

Panasonic ER?GC20 Manuel utilisateur

Panasonic

Panasonic ER-CA70 Manuel utilisateur

Panasonic

Panasonic ER-SC40 Manuel utilisateur

Panasonic

Panasonic ER-FGP72 Manuel utilisateur

Panasonic

Panasonic ER5209 Manuel utilisateur

Panasonic

Panasonic ER-147 Manuel utilisateur

Manuels tondeuse à cheveux populaires d'autres marques

Clatronic

Clatronic HSM 800 Manuel utilisateur

Mellerware

Mellerware MACRO ALDANY MA20001 Manuel utilisateur

Create

Create CLIPPER EASY Manuel utilisateur

VALERA

VALERA X-Master 652 Manuel utilisateur

Wahl

Wahl 1870Li Manuel utilisateur

Remington

Remington HC5780 Manuel utilisateur

Lister

Lister Legend Manuel utilisateur

Philips

Philips HC5440/80 Manuel utilisateur

Andis

Andis MBA 23125 Manuel utilisateur

Philips

Philips Philishave HQC488/61 Manuel utilisateur

Shear Magic

Shear Magic Nifty 1800 Manuel utilisateur

Philips

Philips QC5390 Manuel utilisateur

Andis

Andis US-1 Guide de référence rapide

Philips

Philips HC5450 Manuel utilisateur

Andis

Andis US-1 Instructions d'installation

Remington

Remington Classic HC450 Manuel utilisateur

Andis

Andis ML Instructions d'installation

O'Barber

O'Barber MINI SLIDE Manuel utilisateur