Panasonic ER154-E8 Manuel utilisateur

1 SCHEMATIC DIAGRAM 2

2 WIRING CONNECTION DIAGRAM 2

3 DISASSEMBLY INSTRUCTIONS 3

4 ASSEMBLY INSTRUCTIONS 5

reserved. Unauthorized copying and distribution is a

violation of law.

ER154-E8

5 TROUBLESHOOTING GUIDE 7

6 EXPLODED VIEW 8

7 REPLACEMENT PARTS LIST 8

AC/Rechargeable Hair Clipper for Professional

SPECIFICATIONS

Power source

C/Rechargeable

C 230V, 50Hz

Charging time 1 hour

Weight 200g

Supplied accessories Comb attachment (3mm/4mm, 6mm/9mm, 12mm/15mm)

Charging stand

Charging stand tray

Oil

Cleaning brush

CONTENTS

Page Page

ORDER NO. SD0512E51CE8

1 SCHEMATIC DIAGRAM

2 WIRING CONNECTION DIAGRAM

ER154-E8

Follow the procedure below to disassemble the main body.

1. Remove the attachment.

2. First, hold the handle of the hair clipper firmly with the

"Panasonic" name facing upward and set the dial to

"2.0mm", and push the upper part of the blade away from

the housing.

3. Loosen two screws tightening the spring for cutter and take

out the spring.

4. Remove the front panel.

5. With the dial at “ 2.0mm” , slide up the adjusting dial to the

blade side slightly pushing the adjusting arm with the

slotted-head screwdriver.

6. Loose a screw and take out the bottom cover.

3 DISASSEMBLY INSTRUCTIONS

ER154-E8

7. Loosen a screw and take out the name plate slightly

inserting the slotted-head screwdriver to unhook the side.

8. Separate housing A and B.

ER154-E8

1. Set the click button and the dial spring to the housing A.

2. Place the holding plate on the housing A firmly.

NOTE: Confirm if housing bosses completely cover the

hole of holding plate.

3. Insert the terminal pins into the hole of housing A firmly and

set the battery & module assembly into the housing A.

NOTE: Confirm to set the switch handle OFF position.

And make sure that the projection of switch handle

fixing frame connects to the slit of switch plate.

NOTE: Confirm the smooth movement and operation of

switch handle.

4 ASSEMBLY INSTRUCTIONS

NOTE: Always set the dial to "2.0mm" when removing or attaching the blade; otherwise the blade can not be attached.

Always set the dial to "0.8mm" when removing or attaching the comb attachment.

ER154-E8

4. Insert the motor facing the sticker on the housing B side.

NOTE: The motor has a own direction. Make sure to set

the proper direction when reassembling.

NOTE: Be certain that the lead wires are mounted in the

proper position without setting over the housing ribs.

NOTE: Confirm the smooth movement of click button

and the motor rotates when switching ON.

5. Close the housing B on the housing A.

NOTE: Make sure of the position of lead wires to

prevent pinching.

NOTE: Confirm that the motor rotates when switching

ON.

6. Applying GREASE (FLOIL G741) on the dial. Put two dials

together and align the slit of adjusting dial with the

projection of adjusting arm to assemble the dial.

NOTE: Confirm the smooth movement of adjusting dial.

7. Attach the dust-proof rubber.

8. Set the front panel.

9. Attach the spring for cutter tighten with two screws.

10. Attach the bottom cover with a screw.

11. Tighten a screw and set the name plate.

ER154-E8

5 TROUBLESHOOTING GUIDE

(Refer to WIRING CONNECTION DIAGRAM)

ER154-E8

6 EXPLODED VIEW

7 REPLACEMENT PARTS LIST

Ref. No. Part No. Part Name & Description Remarks Per Unit

1WER9792Y BLADE BLOCK 1

2WER151L9207 TAPPING SCREW *C K2.6-8 2

3WER154L0168 SPRING FOR CUTTER 1

4WER154S3968 FRONT PANEL 1

5WER154S3288 ADJUSTING DIAL 1

6WER150L0137 DUST-PROOF RUBBER 1

7WER154K3058 HOUSING A 1

8WER154L0458 DIAL CLICK BUTTON 1

9WER154L0158 DIAL CLICK SPRING 1

10 WER154L3178 HOLDING PLATE 1

11 WER154L3578 SWITCH CONTACT PLATE 1

12 WER154L1008 MOTOR 1

13 WER154L0778 CHASSIS BLOCK 1

14 WER154L2108 MODULE 1

15 WER154K2158 PLUG BLOCK 1

16 WER154L2508 RECHARGEABLE BATTERY *B Ni-Mh Type (2PCS/PK) 2

17 WER154K3068 HOUSING B 1

18 WER154K8408 NAME PLATE 1

19 WER160L9207 P-TIGHT SCREW M2.0-8 1

20 WER154K3178 BOTTOM COVER 1

21 WER160L9107 SCREW M2-6 1

22 WER154K7398 COMB ATTACHMENT A 3-4MM 1

23 WER154K7408 COMB ATTACHMENT B 6-9MM 1

24 WER154K7418 COMB ATTACHMENT C 12-15MM 1

25 WER154K7188 CHARGING STAND 1

26 WER154K7198 CHARGING STAND TRAY 1

27 WER154K7659 CHARGING ADAPTOR C-2 PLUG 1

28 WES76806761 CLEANING BRUSH 1

29 WER203X7918 OIL 1

-WER154K8008 INDIVIDUAL BOX 1

-WER154K8108 OPERATING INSTRUCTIONS 1

ER154-E8

Table des matières

Autres manuels Panasonic tondeuse à cheveux

Panasonic

Panasonic ER1511 Manuel utilisateur

Panasonic

Panasonic ER-SC60 Manuel utilisateur

Panasonic

Panasonic ER1611 Manuel utilisateur

Panasonic

Panasonic EH-KA81 Manuel utilisateur

Panasonic

Panasonic ER-GP81 Manuel utilisateur

Panasonic

Panasonic ER131 Manuel utilisateur

Panasonic

Panasonic ER-145 Manuel utilisateur

Panasonic

Panasonic ER-GC71 Manuel utilisateur

Panasonic

Panasonic ER-GP80 Manuel utilisateur

Panasonic

Panasonic ER-HGP82 Manuel utilisateur

Panasonic

Panasonic ER-160 Manuel utilisateur

Panasonic

Panasonic ER508 Manuel utilisateur

Panasonic

Panasonic ER1611 Manuel utilisateur

Panasonic

Panasonic ER1512 Manuel utilisateur

Panasonic

Panasonic ER-GC70 Manuel utilisateur

Panasonic

Panasonic ER-GP21 Manuel utilisateur

Panasonic

Panasonic ER1611 Manuel utilisateur

Panasonic

Panasonic ER5209 Manuel utilisateur

Panasonic

Panasonic ER-GP707 Manuel utilisateur

Panasonic

Panasonic ER-GC70 Manuel utilisateur

Panasonic

Panasonic ER-SC40 Manuel utilisateur

Panasonic

Panasonic ER-HGP72 Manuel utilisateur

Panasonic

Panasonic ER1410 Manuel utilisateur

Panasonic

Panasonic ER?GC20 Manuel utilisateur

Manuels tondeuse à cheveux populaires d'autres marques

Clatronic

Clatronic HSM 800 Manuel utilisateur

Mellerware

Mellerware MACRO ALDANY MA20001 Manuel utilisateur

Create

Create CLIPPER EASY Manuel utilisateur

VALERA

VALERA X-Master 652 Manuel utilisateur

Wahl

Wahl 1870Li Manuel utilisateur

Remington

Remington HC5780 Manuel utilisateur

Lister

Lister Legend Manuel utilisateur

Philips

Philips HC5440/80 Manuel utilisateur

Andis

Andis MBA 23125 Manuel utilisateur

Philips

Philips Philishave HQC488/61 Manuel utilisateur

Shear Magic

Shear Magic Nifty 1800 Manuel utilisateur

Philips

Philips QC5390 Manuel utilisateur

Andis

Andis US-1 Guide de référence rapide

Philips

Philips HC5450 Manuel utilisateur

Andis

Andis US-1 Instructions d'installation

Remington

Remington Classic HC450 Manuel utilisateur

Andis

Andis ML Instructions d'installation

O'Barber

O'Barber MINI SLIDE Manuel utilisateur