Panasonic Lumix DMC-TZ8 Manuel utilisateur
VQT2T07
Basic Operating Instructions
Digital Camera
Model No. DMC-TZ8
Before use, please read these instructions
completely.
Please also refer to Operating Instructions (PDF
format) recorded on the CD-ROM containing the
Operating Instructions (supplied).
You can learn about advanced operation methods and check the
Troubleshooting.
GN
2 VQT2T07 (ENG) (ENG) VQT2T07 3
Dear Customer,
We would like to take this opportunity to thank you for purchasing this
Panasonic Digital Camera. Please read these Operating Instructions
carefully and keep them handy for future reference. Please note that the
actual controls and components, menu items, etc. of your Digital Camera
may look somewhat different from those shown in the illustrations in
these Operating Instructions.
Carefully observe copyright laws.
• Recording of pre-recorded tapes or discs or other published or
broadcast material for purposes other than your own private use may
infringe copyright laws. Even for the purpose of private use, recording
of certain material may be restricted.
Information for Your Safety
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT
DAMAGE,
•DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,
DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED
WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
•USE ONLY THE RECOMMENDED ACCESSORIES.
•DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
IF THE POWER CORD OF THIS EQUIPMENT IS DAMAGED, IT MUST
BE REPLACED WITH AN ELECTRICALLY APPROVED POWER CORD.
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE
EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
Product Identification Marking is located on the bottom of units.
■About the battery pack
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above
60 °C or incinerate.
4 VQT2T07 (ENG) (ENG) VQT2T07 5
■About the battery charger
CAUTION!
•DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN
CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS
WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE
HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY
OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
•DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH
NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
•DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED
CANDLES, ON THE UNIT.
•DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER.
• The battery charger is in the standby condition when the AC power supply cord is
connected.
The primary circuit is always “live” as long as the power cord is connected to an
electrical outlet.
■Cautions for Use
• When using an AC adaptor, use the AC cable supplied with the AC adaptor.
• Do not use any other AV cables except the supplied one.
• Do not use any other USB connection cables except the supplied one.
In the event of abnormal operation (e.g. if the unit emits smoke or an unusual
smell), immediately stop operating the unit and consult the Panasonic Customer
Care Centre on 132600.
Keep the camera as far away as possible from electromagnetic equipment
(such as microwave ovens, TVs, video games etc.).
• If you use the camera on top of or near a TV, the pictures and sound on the
camera may be disrupted by electromagnetic wave radiation.
• Do not use the camera near cell phones because doing so may result in noise
adversely affecting the pictures and sound.
• Recorded data may be damaged, or pictures may be distorted, by strong
magnetic fields created by speakers or large motors.
• Electromagnetic wave radiation generated by microprocessors may adversely
affect the camera, disturbing the pictures and sound.
• If the camera is adversely affected by electromagnetic equipment and stops
functioning properly, turn the camera off and remove the battery or disconnect
AC adaptor (DMW-AC5G; optional). Then reinsert the battery or reconnect AC
adaptor and turn the camera on.
Do not use the camera near radio transmitters or high-voltage lines.
• If you record near radio transmitters or high-voltage lines, the recorded pictures
and sound may be adversely affected.
-If you see this symbol-
Information on Disposal in other
Countries outside the European
Union
This symbol is only valid in the
European Union.
If you wish to discard this product,
please contact your local authorities or
dealer and ask for the correct method of
disposal.
6 VQT2T07 (ENG) (ENG) VQT2T07 7
Contents Standard accessories
Before use
Standard accessories ................7
Names of parts............................8
Cursor button ...................................9
Preparations
Charging battery .......................10
Inserting and removing the card
(optional)/the battery ................12
Picture save destination
(cards and built-in memory) ...........13
Setting the clock .......................14
Setting the menu ......................15
Basics
Selecting the [REC] mode ........16
Taking pictures with
automatic settings
[INTELLIGENT AUTO] Mode ....17
AF Tracking ....................................18
Taking motion pictures
[MOTION PICTURE] Mode ........19
Viewing your pictures
[NORMAL PLAY] .......................20
Deleting pictures ......................20
Others
Reading the Operating
Instructions (PDF format) ........21
Specifications ...........................23
Information for Your Safety .......2
Check that all the accessories are included before using the camera. Part
numbers are as of January 2010.
Battery Pack
DMW-BCG10E
• Charge the battery
before use.
Battery Pack is indicated as
battery pack or battery in the
text.
Battery Charger
DE-A66A
Battery Charger is indicated as
battery charger or charger in
the text.
Battery Carrying Case
VGQ0E45
AC Cable
K2CJ29A00002
Hand Strap
VFC4297
USB Connection Cable
K1HA08AD0002
AV Cable
K1HA08CD0028
CD-ROM
VFF0601
• Software:
Use it to install the
software on your PC.
• Operating
Instructions
• Cards are optional. You can record or play back pictures on the built-in
memory when you are not using a card.
• Consult the dealer or your nearest servicentre if you lose the supplied
accessories. (You can purchase the accessories separately.)
• Please dispose of all packaging appropriately.
8 VQT2T07 (ENG) (ENG) VQT2T07 9
Names of parts
Cursor button
Hand strap eyelet
[AV OUT/DIGITAL] socket
The illustrations and screens in this manual may differ from the actual
product.
[MENU/SET]
(menu display/set/finish)
Left cursor button (◄)
• Self-timer
Down cursor button (▼)
• Macro mode
Up cursor button (▲)
• Exposure compensation
Right cursor button (►)
• Flash
●In this manual, the button that is used is shaded or indicated
by▲▼◄►.
●We recommend you use a battery with sufficient battery power or the
AC adaptor when recording motion pictures.
●If while recording motion pictures using the AC adaptor the power
supply is cut off due to a power cut or if the AC adaptor is disconnected
etc., the motion picture being recorded will not be recorded.
Camera ON/OFF switch
Shutter button
Mode dial
Flash
Self-timer indicator/AF assist lamp
Lens barrel
Lens
●Always use a genuine Panasonic AC adaptor (DMW-AC5G: optional).
●When using an AC adaptor, ensure that the Panasonic DC coupler
(DMW-DCC5; optional) and AC adaptor (DMW-AC5G; optional) are
used.
Zoom lever
We recommend using the
supplied hand strap to avoid
dropping the camera.
Tripod receptacle
• Ensure that the tripod is stable.
Card/Battery door
Release lever
DC coupler cover
LCD monitor
[EXPOSURE] button
[DISPLAY] button
Q.MENU/delete button
Speaker
Microphone
REC/PLAY switch
[E.ZOOM] button
10 VQT2T07 (ENG) (ENG) VQT2T07 11
Charging battery
■About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BCG10E.
It has been found that counterfeit battery packs which look very
similar to the genuine products are made available to purchase
in some markets. Some of these battery packs are not adequately
protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised
that we are not liable for any accident or failure occurring as
a result of use of a counterfeit battery pack. To ensure that
safe products are used we would recommend that a genuine
Panasonic battery pack is used.
•Use the dedicated charger and battery.
•The camera has a function for distinguishing batteries which can
be used safely. The dedicated battery (DMW-BCG10E) supports
this function. The only batteries suitable for use with this unit
are genuine Panasonic products and batteries manufactured by
other companies and certified by Panasonic. (Batteries which do
not support this function cannot be used). Panasonic cannot in
any way guarantee the quality, performance or safety of batteries
which have been manufactured by other companies and are not
genuine Panasonic products.
•The battery is not charged when the camera is shipped. Charge
the battery and set the clock before use.
•Charge the battery with the charger indoors (10 °C - 35 °C).
■Guidelines for number of recordable pictures and
recording time
Number of recordable
pictures Approx. 340 pictures
Recording time Approx. 170 min
Playback time Approx. 300 min
Recording conditions by CIPA standard
• CIPA is an abbreviation of [Camera & Imaging Products Association].
• [PROGRAM AE] Mode
• Temperature: 23 °C/Humidity: 50% when LCD monitor is on.∗
• Using a Panasonic SD Memory Card (32 MB).
• Using the supplied battery.
• Starting recording 30 seconds after the camera is turned on. (When the
optical image stabilizer function is set to [AUTO].)
• Recording once every 30 seconds with full flash every second
recording.
• Rotating the zoom lever from Tele to Wide or vice versa in every
recording.
• Turning the camera off every 10 recordings and leaving it until the
temperature of the battery decreases.
∗ The number of recordable pictures decreases when [LCD MODE] is used.
Insert the battery terminals and attach
the battery to the charger
Ensure [LUMIX] faces outwards.
1
2
Connect the charger to the electrical outlet
Charging light
([CHARGE])
On: Charging in progress
(approx. 130 min. if
fully depleted)
Off: Charging complete
Detach the battery after charging is completed
12 VQT2T07 (ENG) (ENG) VQT2T07 13
Inserting and removing the card
(optional)/the battery
■To remove
•To remove battery:
move lever in direction of arrow.
•To remove card:
press down in centre.
Lever
●Always use genuine Panasonic batteries (DMW-BCG10E).
●If you use other batteries, we cannot guarantee the quality of this
product.
●The card may be damaged if it is not fully inserted.
●Keep the Memory Card out of reach of children to prevent swallowing.
Set the camera ON/OFF switch
to OFF and slide the release
lever ( A) to [OPEN] before
opening the lid
Completely insert battery and
card
• Battery: Push in until the lever is locked
• Memory card: Push in until it clicks
B Do not touch terminal
C Check orientation
Close lid
Slide to the [LOCK] position.
Picture save destination (cards and built-in memory)
■Built-in memory (approx. 40 MB)
●
The built-in memory can be used as a temporary storage device when the
card being used becomes full.
●
The access time for the built-in memory may be longer than the access time
for a card.
■Compatible memory cards (optional)
The following SD standard-based cards
(Panasonic brand recommended)
Type of Card Capacity Notes
SD memory
cards
8 MB – 2 GB
• Can be used with devices
compatible with the
respective formats.
• Before using SDXC memory
cards, check that your
computer and other devices
support this type of card.
http://panasonic.net/avc/
sdcard/information/SDXC.
html
• Cards in capacities not listed
at left are not supported.
SDHC memory
cards
4 GB – 32 GB
SDXC memory
cards
48 GB – 64 GB
●If the write-protect switch is set to ‘LOCK’, the card cannot be used to
record or delete pictures, and it cannot be formatted.
●Latest information:
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Switch (LOCK)
[OPEN] [LOCK]
B
C
A
14 VQT2T07 (ENG) (ENG) VQT2T07 15
Setting the clock Setting the menu
The clock is not set when the camera is shipped.
Turn on the power ( A)
Press [MENU/SET] ( B) while
the message is displayed
Press ◄► to select the items
(year, month, day, hour, minute,
display order or time display
format), and press ▲▼ to set
• To cancel → Press .
Press [MENU/SET]
Confirm the setting and press
[MENU/SET]
• To return to the previous screen, press
.
• Turn on power again and check time
display.
A
B
■To change time setting
Select [CLOCK SET] from [REC] or [SETUP] menu, perform and .
Refer to the following procedures to operate menus such as the [SETUP]
menu, [REC] menu, [TRAVEL MODE] menu and [PLAYBACK] menu.
Example: Setting [LCD MODE] from [OFF] to in the [PROGRAM
AE] Mode
Press [MENU/SET] to display the menu
Switching to the [SETUP] menu
1 Press ◄.
2 Press ▼ to select the [SETUP] menu
icon [ ].
3 Press ►.
• Select a menu item next and set it.
Press ▲▼ to select [LCD MODE]
and then press ►
• Depending on the item, its setting may not
appear or it may be displayed in a different
way.
Press ▲▼ to select and then
press [MENU/SET] to set
Press [MENU/SET] to close the
menu
16 VQT2T07 (ENG) (ENG) VQT2T07 17
Selecting the [REC] mode
Taking pictures with automatic settings
[INTELLIGENT AUTO] Mode Recording mode:
Turn on the power ( A)A
BC
Slide the [REC/PLAY] switch
(B) to
Switching the mode by rotating
the mode dial ( C)
[INTELLIGENT AUTO] Mode
Take pictures with automatic settings.
[PROGRAM AE] Mode
The subjects are recorded using your own settings.
[APERTURE-PRIORITY] Mode
The shutter speed is automatically determined by the aperture value you
set.
[SHUTTER-PRIORITY] Mode
The aperture value is automatically determined by the shutter speed you
set.
[MANUAL EXPOSURE] Mode
The exposure is adjusted by the aperture value and the shutter speed which
are manually adjusted.
[CUSTOM] Mode
Use this mode to take pictures with previously registered setting.
[MY SCENE MODE]
Take pictures in frequently-used scene modes.
[SCENE MODE]
Take pictures according to scene.
[MOTION PICTURE] Mode
Take motion pictures.
[CLIPBOARD] Mode
Take pictures as memos.
Optimum settings are made automatically from information such as ‘face,’
‘movement,’ ‘brightness,’ and ‘distance’ just by pointing the camera at
the subject, meaning that clear pictures can be taken without the need to
make settings manually.
Turn on the power ( A)Shutter button
A
BC
Slide the [REC/PLAY] switch
(B) to
Set the mode dial ( C) to
Take pictures
Press halfway
(press lightly and focus)
Press fully
(press the button all the way to record)
• If jitter becomes noticeable, use both hands, keep your arms close
to your body, and stand with your feet at shoulder width.
•Focus display ( D)
(In focus: lit / Not in focus: flashing)
• The AF area ( E) is displayed around
the subject’s face by the face detection
function. In other cases, it is displayed at
the point on the subject which is in focus.
D
E
18 VQT2T07 (ENG) (ENG) VQT2T07 19
Taking pictures with automatic settings
[INTELLIGENT AUTO] Mode (Continued)
Recording mode:
Taking motion pictures [MOTION PICTURE] Mode
Recording mode:
■Automatic scene detection
Camera identifies scene when pointed at subject, and makes optimum
settings automatically. The type of scene detected is indicated by a blue
icon for two seconds.
Recognises people [i PORTRAIT]
Recognises babies [i BABY] (When babies (under 3 years) that are
registered with the face recognition function are recognised)
Recognises landscapes [i SCENERY]
Recognises night scenes and people in them [i NIGHT PORTRAIT]
(Only when is selected)
Recognises night scenes [i NIGHT SCENERY]
Recognises close-ups [i MACRO]
Recognises sunsets [i SUNSET]
Reads subject movement to avoid blurring when scene does not
correspond to any of the above.
If the camera automatically identifies the scene and determines that people
appear as subjects in the picture ( or ), face detection is activated,
and the focus and exposure are adjusted for the recognised faces.
AF Tracking
Even if a subject where the focus was locked (AF Lock) moves, the
camera can continue to keep it in focus.
Press▲ A
B
A AF tracking icon
B AF tracking frame
• Press ▲ again to cancel.
Align the AF tracking frame with the subject, and
then press ▼ to lock
• The optimum scene is detected for the subject where the focus
was locked (AF Lock).
• AF Lock successful: Yellow
• AF Lock failed: Red (flash)
• Press ▲ to cancel.
This records motion pictures with audio. (Recording with muted sound
is not possible. Sound recording is monaural.) Zoom can also be used
during recording.
Slide the [REC/PLAY] switch to
Set the mode dial to
Start recording
Elapsed recording time
Remaining recording
time (approx.)
Press halfway
(Adjust the focus)
Press fully
(start recording)
End recording
Press fully
●Immediately release the shutter button after pressing it all the way.
●When there is no space left to store the motion picture, recording
automatically ends.
●A maximum of approx. 2 GB of continuous motion picture can be
recorded. (Even if there is more than 2 GB of available space on the
card, the available recording time will be calculated for a maximum of
2 GB.)
Table des matières
Autres manuels Panasonic Appareil photo numérique
Panasonic
Panasonic LUMIX DMC-LX2 Manuel utilisateur
Panasonic
Panasonic Lumix DMC-F1 Manuel utilisateur
Panasonic
Panasonic GP-VD150 Manuel utilisateur
Panasonic
Panasonic Lumix DMC-FZ150 Instructions d'installation et d'entretien
Panasonic
Panasonic Lumix DC-TZ220 Manuel utilisateur
Panasonic
Panasonic Lumix DMC-LX5 Manuel utilisateur
Panasonic
Panasonic Lumix DMC-FX700 Caractéristiques techniques
Panasonic
Panasonic Lumix DMCGX7KK Instructions d'installation et d'entretien
Panasonic
Panasonic LUMIX DMC-FX75 Caractéristiques techniques
Panasonic
Panasonic LUMIX DMC-FP1 Caractéristiques techniques
Panasonic
Panasonic D-Snap SV-AS10 Manuel utilisateur
Panasonic
Panasonic DMC FS7G - Lumix Digital Camera Manuel utilisateur
Panasonic
Panasonic Lumix DMC-GX1K Instructions d'installation et d'entretien
Panasonic
Panasonic Lumix DC-GH5M2 Manuel utilisateur
Panasonic
Panasonic Lumix DMC-TZ20 Manuel utilisateur
Panasonic
Panasonic LUMIX DMC-LF1 Manuel utilisateur
Panasonic
Panasonic Lumix DMC-LS5 Manuel utilisateur
Panasonic
Panasonic DMC-GF2CS Manuel utilisateur
Panasonic
Panasonic Lumix DMC-ZS5 Manuel utilisateur
Panasonic
Panasonic DMCFH22 - DIGITAL STILL CAMERA Manuel du propriétaire
