Panasonic CF-37 Series Manuel utilisateur

CF-37 Series

Reference Manual

Personal Computer

Contents

We recommend that this Reference Manual be printed.

NOTE:NOTE provides a useful fact or helpful information.

CAUTION:CAUTION indicates a condition that may result in minor or moderate injury.

WARNING:WARNING indicates a hazard that may result in moderate or serious injury.

[Start]-[Shut Down]: This illustration means to click [Start], then to click [Shut Down].

(For some applications, you may need to double-click.)

Enter : This illustration means to press the [Enter] key.

Fn + F5 : This illustration means to press and hold the [Fn] key, then press the [F5] key.

page: When the cursor is moved to an item under [Contents] or to page (green display), the

shape of the cursor will change to . Under this condition, if characters are tapped (or a

click is made), the corresponding page in the Reference Manual will be displayed.

: This illustration means to refer to the Operating Instructions.

Illustrations in this Reference Manual

Read Me First......................................................2

Key Combinations ..............................................4

LED Indicators....................................................5

Touch Pad (Basic Operation).............................6

Touchscreen .......................................................7

Panasonic HandWriting (Touchscreen) ...........9

Suspend/Hibernation Functions .....................10

Security Measures ...........................................13

Computing OnThe Road..................................17

Battery Power ...................................................20

Multimedia Pocket ............................................25

CD-ROM/DVD-ROM Drive.................................26

SuperDiskTM Drive ............................................28

PC Cards ...........................................................29

RAM Module......................................................31

Printer................................................................32

External Display ...............................................33

Modem...............................................................34

Hard Disk Drive.................................................35

Setup Utility ......................................................36

Technical Information ......................................42

DMI Viewer ........................................................43

List of Error Codes...........................................44

DealingWith Problems (Advanced) ................46

Do not power off your computer or press the SuperDisk drive eject button while

the MP indicator ( ) is on.

Doing so may damage the data on the disk and render the disk useless.

Use care when handling disks.

To protect the data on your disks or to prevent a disk from becoming stuck in your

computer, avoid the following:

• Sliding the shutter on the disk manually.

• Exposing the disk to a magnetic field.

• Storing the disk in locations prone to high temperatures, low pitched noise, dampness, or

dust.

• Applying more than one label on the disk.

Confirm the contents of a disk before formatting it.

Confirm that no important data is on the disk, because all data on the disk will be

erased.

Use the write-protect tab.

Thisisamustforpreservingimportantdata.

This prevents your data from being erased

or overwritten.

Do not expose your computer to shock.

Please use care when handling your computer, shock may damage your hard disk

or make your software applications and data unusable.

Do not power off your computer while software applications are running or

HDD indicator ( ) is on.

Properly shutWindows* down to avoid problems ([Start] - [Shut Down] ).

Save all valuable data to disks.

Backing up data to disks will limit damage should trouble occur to your computer or

should you inadvertently change or erase data.

Use the security function for all important data. ( page 13)

Saving Data on the Hard Disk

*This computer uses Microsoft®Windows NT®Operating System.

Write Enable Write Disable

Write-protectTab

Saving Data on Disks

Users are advised to purchase the latest versions of virus protection software

and use them regularly.

ComputerViruses

We recommend you run the software:

• When booting your computer.

• After receiving data.

We recommend that you check data received on disks or from external sources,

such as data downloaded from the Internet, e-mail, etc. (For compressed files,

please uncompress them before running a check).

In this manual, the followings are described as disks.

When using disks, an optional SuperDisk Drive Pack (CF-VFS371) is needed.

SuperDisk (120 MB)

Floppy disk (720 KB, 1.44 MB)

NOTE

LCD Panel High-precision and advanced technologies are necessary in the production of color

liquid crystal displays (color LCDs).Therefore, if 99.998% or more of the picture

elements are functioning properly, no defect is considered to exist.

Read Me First

Environment

Place the computer on a flat stable surface.

In use: Temperature: 5 °C to 35 °C {41 °F to 95 °F}

Humidity: 30% to 80% RH (No condensation)

Not in use: Temperature: -20 °C to 60 °C {-4 °F to 140 °F}

Humidity: 30% to 90% RH (No condensation)

Usage Environment

Such areas may result in damage to the computer.

Areas with electronic equipment

These areas may interfere with your display or

cause your computer to produce strange sounds.

Areas with extremely high/low temperatures

Places not to use your computer

Do not leave things near the computer that are sensitive to heat. During opera-

tion, the computer may become warm.

Handling

This computer has been designed so as to minimize shock to the LCD and hard disk

drive, the leakage of liquid (e.g., water) from the keyboard, etc., but no warranty is pro-

vided against such trouble. Therefore, as a precision instrument, please be extremely

careful in the handling.

Do not drop or hit your computer against solid objects.

Do not stand the computer on its side or allow it to tip over. When the computer receives

extremely strong shock after falling, the hard disk or floppy disk drive, etc., may become

inoperable.

Do not carry your computer when it is ON.

Remove all cables before transporting your computer.

We recommend preparing a fully charged battery (and optional charger, if possible).

When transporting spare batteries inside a package, briefcase, etc., it is recommended

that the batteries be stored in a plastic bag.

Do not place the computer upright. When the computer receives extremely strong shock

after falling, the hard disk or floppy disk drive, etc., may become inoperable.

Do not carry the computer while the display is open, or carry it by gripping the display.

Do not put anything (e.g., a piece of paper) between the display and keyboard.

Always carry your computer with you. Never check it in with luggage. For use of the

computer inside an aircraft, we recommend asking the airlines regarding their policy on

this issue.

It is a good idea to make backup copies on disks and carry them with you.

Do not leave a disk in the drive while transporting your computer.

Maintenance

Areas excluding the display

Wipe these areas with a soft cloth, after apply-

ing water or detergent diluted with water to the

softcloth andfirmly wringingout excesswater.

Display

Use a soft dry cloth like gauze to lightly

wipe the display.

Touch Pad

page 6

Key Combinations

CAUTION

Pressing this key combination adjusts the brightness

of LCD.

By pressing this key combination, you can select ei-

ther an external display, LCD or simultaneous, even

if an external display is not connected. Rebooting

the computer, or powering off then on, restores the

display setting of the Setup Utility.

Pressing this key combination turns off audio from the

internal speakers and headphone jack. Pressing it

again, orrebooting the computerrestores the speaker

setting of the Setup Utility.

Pressing this key combination adjusts the volume of

the internal speakers and headphone jack.

Pressing this key combination causes the current

screen on the display to be saved to memory, and

powers off the computer. When the computer is pow-

ered on, by sliding the power switch, the saved screen

will be displayed. (The computer must be plugged

into the AC adapter or have a battery pack with suffi-

cient remaining power installed.)

Pressing this key combination temporarily disables

the power management (timeout feature) of the Setup

Utility. Pressing it again, or rebooting the computer

restores the power management setting of the Setup

Utility. page 19,36

Pressing this key combination displays the remain-

ing battery capacity on the screen. page 20

Pressing this key combination turns off the LCD, ex-

ternal display and hard disk drive until operation is

resumed by pressing any key or mouse*4 (except the

keyboard and mouse connected to the USB port).

LCD brightnesscontrol

(down)

LCD brightness control

(up)

Display change

Speakers on/off switch

Volume control

(down)

Volume control ( up)

Holding down on the keys

changes the sound level.

Power off using the

suspend function

Power management

enable/disable switch

Remaining capacity of

the battery pack

ECO mode for conserv-

ing power

Fn + F1

Fn + F3

Fn + F4

Fn + F5

Fn + F7

Fn + F8

Fn + F9

Fn + F

Fn + F6

Is displayed when

the brightness is at

its maximum value.

Key Functions PopupWindow

OFF

Enable

Disable

Down

Disabling the speakers will also disable the warn-

ing beep.

Remaining

capacity (%)

display

Battery pack is

not installed.

NOTE

Fn + F2

This key combination cannot be used to adjust the vol-

ume of the warning beep and the touchscreen sound.

*1Under the condition the sound function of Windows is not working, or is displayed, but the volume does not change.

*2 When [Disable] is set for [Fn+F7/Fn+F10 key] with the Setup Utility, these key combinations become inoperable.

*3Depending on the state of the system, settings may be unable to be changed. In such cases, try performing the settings again.

*4 This "mouse" indicates the touch pad, the touchscreen and an external mouse.

Is displayed when

the brightness is at

its minimum value.

CAUTION

Do not press the following key combinations repeatedly in (quick) succession.

Do not press the following key combinations while using the touch pad (mouse) or other keys.

When a MIDI file is playing, do not use the following key combinations. The tempo of the MIDI file may temporarily slow.

After this, a noise may be produced. In this case, stop playing once, and play again.

LED Indicators

NOTE

MP is the abbreviation for Multimedia Pocket.

This indicator lights green when Caps Lock is pressed. Subsequent non-

shifted input is capitalized.

These indicators light green when NumLk is pressed. This causes a por-

tion of the keyboard to function as a numeric keypad. The [Enter] key

functions differently depending on the application.

This indicator lights green when ScrLk is pressed. Scroll lock functions

differently depending on the application.

This indicator lights when the hard disk drive is accessed.

This indicator lights when the multimedia pocket device (CD-ROM drive,

DVD-ROM drive or SuperDisk drive) is accessed.

When the battery pack (including the adapter) is set in the Multimedia

Pocket, the Multimedia Pocket device status LED shows the same indica-

tions as the battery pack status LED (see below).

Not lit : AC adapter not connected or charging not being per-

formed.

Orange : Charging in progress.

Green : Charging finished.

Red : Battery is low

(remaining battery capacity is approx.9% or less).

Blinking red : Battery pack or charging malfunction.

Blinking orange five times after the AC adapter is connected :

Charging on standby.(The ambient temperature is out-

side the allowable range. Once the allowable range

requirementis satisfied,charging beginsautomatically.)

Not lit : Power off

Green : Power on

Blinking green : Suspend mode

Caps Lock

NumLk(Numeric key)

ScrLk (Scroll lock)

Hard disk status

Multimedia pocket

device status

Battery pack

status

Power status

Touch Pad (Basic Operation)

Two quick taps, but on

the second tap leaving

your finger down (ap-

plying pressure) and

moving it on the work

surface.

Whileholding downthe

button, moving your

finger on the work sur-

face.

Function Touch Pad Operation

Moving the Cursor

Tapping/Clicking

Double-Tapping/

Double-Clicking

Dragging

Move the tip of your finger

lightly over the surface.

tapping clicking

double-tapping double-clicking

Use the touch pad to move the cursor on the display and perform normal computer operations.

Basic Operation

The touch pad has been designed to work only when a finger is used. Therefore, do

not use any implement on the touch pad.

NOTE

Handling theTouch Pad

Do not place any object on the work surface or press down forcefully with sharp-

pointed objects (i.e.nails), hard objects that can leave marks (i.e.pencils and ball

point pen).

Do not allow contact with substances that could dirty the touch pad, such as oil.

The cursor may not work properly in such cases.

When the touch pad becomes dirty:

Wipe to remove dirty areas by using a dry soft cloth such as a gauze or soft cloth

first applied with detergent diluted with water and then thoroughly wrung.

Do not use benzene or thinner, or disinfectant-type alcohol.

Left Button

Right Button

Work Surface

Your computer is equipped with a touchscreen display allowing you to perform the same

operations as the touch pad or mouse by touching the surface of the display with your

finger. (The following explanation gives one example (for the default settings). The

operation settings can be changed in [Start] - [Programs] - [Updd] - [Settings].)

Handling theTouchscreen

Do not place any object on the surface or press down forcefully with sharp-pointed

objects (i.e.nails), hard objects that can leave marks (i.e. pencils and ball point

pen).

Do not apply pressure within 5 mm of the perimeter of the display panel. The cursor

may move to the edge of the display.

Do not operate the computer when such things as dust are on the screen. Do not

allow contact with substances that could dirty the touchscreen, such as oil. The

cursor may not work properly in such cases.

When the touchscreen becomes dirty:

Wipe to remove dirty areas by using a dry soft cloth such as a gauze or soft cloth

first applied with detergent diluted with water and then thoroughly wrung.

Do not use benzene or thinner, or disinfectant-type alcohol.

Moving the cursor Clicking

Double-clicking Dragging

Cursor

Touchscreen

CAUTION

The touchscreen function can not be used when using the full screen in [MS-

DOS prompt].

When the operation of panning (only LCD) is performed while the screen resolu-

tion is set to [1024 x 768 dots], the touchscreen function will not work properly.

If a change is made to the screen resolution, or the cursor can not be pointed

correctly with your finger, be sure to perform [Calibrate]. page 8

The touchscreen function can not be used when [Base I/O] of [Serial port B] has

been set to [3F8/IRQ4] in the Setup Utility. In this case, set [Serial port A] to

[Disable].

(To next page)

Tap and hold the object (i. e.file

or icon),move your finger on the

surface (dragging the object to

the desired location), then re-

lease your finger.

Two quick

taps

One tap

When needed, the touchscreen can be configured using the following steps.

Configuring the touchscreen

Touchscreen

Make necessary changes

For more information, refer to [Help].

Click [OK]

NOTE

Select from the taskbar or select [Settings] from [Start] -

[Programs] - [Updd]

The following screen will appear.

Advanced

Hardware Button Modes

Calibration

Define the calibration setup.

Use when the cursor can not be pointed correctly with

your finger.(Needed if the alignment of the touchscreen

with the visual image change or adjust the display resolu-

tion).

Set the hardware resources.

Match this setting with the

setting for [Base I/O] in the

Setup Utility.

Set the button modes.

Set the advanced settings.

Devices

Configure the device controller.

About

Display the version number.

Status

Display the status of the controller.

Windows

Set the “double-click”

settings.

General

Setthe generalsettingsandfunctions.

Events

Set the events that can be generated

by a controller.

Settings

Set the general protocol

settings.

The touchscreen can be used for only [Whole Desktop] setting in [Devices] -

[Modify] - [logical desktop segment]. This setting is default.

NOTE

CAUTION

Drawing Characters or Figures

Simple characters and figures like signatures and arrows can be made by using the work

surface of the touchscreen, and can be saved to a file as a bitmap (.bmp) format.

Select from the taskbar or select [Panasonic Hand Writing]

from [Start] - [Programs] - [Panasonic]

To draw, an object with a rounded tip (e.g., a pen for tablets) can be used.

Do not use any of the following objects, as they may damage the work surface.

• Objects with an extremely sharp tip, like screwdrivers and nails.

• Objects that leave marks, like ball point pens.

Panasonic HandWriting does not operate properly when theTouchscreen can-

not be used.

NOTE

Draw a character or figure using the work surface of the

touchscreen

Data can be copied to the clipboard with [Edit] - [Copy]. Copied data can be

added to other applications that support the bitmap format by using the paste

function. Pasting is not possible to applications that do not support the bitmap

format.

CAUTION

Do not perform a drag operation by the Touch Pad or the external mouse as the

movement will be input on the display.

Select [Save As] or [Save] from [File]

NOTE

The file size of a bitmap image to be saved or pasted to another application can

be changed with [Option] - [Window size].

CAUTION

Drawing accuracy may be degraded if another application, such as FD access-

ing, is being executed simultaneously. Begin drawing only after other applica-

tions have been closed.

Panasonic HandWriting(Touchscreen)

Function

Suspend function Hibernation function

Where data is saved to

Memory Hard disk

Speed

Fast Somewhat slow

Requires power supply

Yes (if power is cut, all data is lost) Power not required to maintain data

Run the Setup Utility ( page 36)

Using and , select [Power]

Using and , select [Power Switch] and press Enter

Setting the Suspend or Hibernation Function

If you want to immediately start up and continue an application after shutting down your

computer, you can do so by using the suspend or hibernation function.

Starting UpYour Computer Quickly

Suspend/Hibernation Functions

Differences between the suspend and hibernation functions

[Hibernation] is factory set.

CAUTION

Suspend Mode

Hibernation Mode

The computer should be set for suspend or hibernation ( see the above procedure).

(Afterreleasing your fingerfrom thepower

switch, do not touch the power switch,

keyboard or mouse while the computer is

entering in the suspend or hibernation

modes.)

At the "beep*" sound, release your finger from the power switch. If you con-

tinue to slide the switch and hold it for more than four seconds, the power will go

off. Data not previously saved will be lost.

Slide the power switch to power on.

If the computer will not be operated for an extended period of time, it is recom-

mended that hibernation mode be used instead of the suspend mode.

*When the speaker function is disabled, e.g., by setting [Disable] for [Speaker] with the

Setup Utility ( page 36) or by the key combination Fn + F4 , there will be no beep

sound.

Shutting Down Using the Suspend or Hibernation Function

Slide the power switch

Press F10 , then select [Yes]

Using and , select [Suspend] or [Hibernation] and

press Enter

(To next page)

The Suspend or Hibernation function can be set even with [Panel Switch] in the

Setup Utility. page 40

NOTE

Autres manuels pour CF-37 Series

Table des matières

Autres manuels Panasonic Ordinateur de bureau

Panasonic

Panasonic 9TGCF-181A Manuel utilisateur

Panasonic

Panasonic CF-52 Series Manuel utilisateur

Panasonic

Panasonic FZ-S1 Series Manuel utilisateur

Panasonic

Panasonic Toughbook CF-18 Series Manuel utilisateur

Panasonic

Panasonic CF-M34 Series Manuel utilisateur

Panasonic

Panasonic TOUGHBOOK CF-19FHGAX M Series Manuel utilisateur

Panasonic

Panasonic Toughbook CF-18 Series Schéma de câblage

Panasonic

Panasonic CF-33 series Manuel utilisateur

Panasonic

Panasonic Toughbook CF-18 Series Manuel utilisateur

Panasonic

Panasonic CF-31 Series Manuel utilisateur

Panasonic

Panasonic CF-37 Series Manuel utilisateur

Panasonic

Panasonic CF-30 Series Schéma de câblage

Panasonic

Panasonic CF-73JCLTXKM - Toughbook 73 - Pentium M 1.6... Manuel utilisateur

Panasonic

Panasonic FZ-55 Series Manuel utilisateur

Panasonic

Panasonic CF-SX2 SERIES Manuel utilisateur

Panasonic

Panasonic CF-MX4 series Manuel utilisateur

Panasonic

Panasonic JR-100U Manuel utilisateur

Panasonic

Panasonic Toughbook CF-47 Series Manuel utilisateur

Panasonic

Panasonic CF-30 Series Manuel utilisateur

Panasonic

Panasonic CF-71 Series Manuel utilisateur

Panasonic

Panasonic CF-53 Manuel utilisateur

Panasonic

Panasonic CF-H2 series Manuel utilisateur

Panasonic

Panasonic CF-195DYAXBM Manuel utilisateur

Panasonic

Panasonic CF-29 Series Manuel utilisateur

Manuels Ordinateur de bureau populaires d'autres marques

HP m9060n - Pavilion - Elite Fiche technique

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

HP Presario SV7000 - Desktop PC Manuel utilisateur

HP ProDesk 400 G5 Manuel

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur