Panasonic BL-PA100KT Manuel utilisateur

Operating Instructions

HD-PLC Ethernet Adaptor Starter Pack

Power Line Communication

Model No.

BL-PA100KT

Set of 2 Adaptors (Master and Terminal)

Introduction

IMPORTANT SAFETY INSTRUCTIONS .........................................................4

Disposal information ........................................................................................5

Electrical environment information...................................................................6

Security information .........................................................................................7

Security notices for when sending an adaptor for service ...............................7

How does it work?............................................................................................8

Main unit ..........................................................................................................9

Installation

Placing the adaptors ......................................................................................10

Connecting adaptors to network devices .......................................................11

Useful Information

Testing a terminal’s network speed ...............................................................12

Understanding the indicators .........................................................................13

Resetting an adaptor .....................................................................................14

Registration....................................................................................................15

Troubleshooting..............................................................................................16

Specifications.................................................................................................18

Table of Contents

Please read this document before use and save this document for future reference.

IMPORTANT NOTES:

For best results, connect this product directly to a wall outlet.

This product may not function normally in certain electrical environments.

See page 6 for more information.

Introduction

Thank you for purchasing a Panasonic HD-PLC product.

Main features

Flexible and stable network access anywhere in your home

The BL-PA100 offers the next generation in home networking: high-speed power

line communication. High-speed internet access and high performance data

transfers are now available in any room.

Every AC outlet becomes a home network access point

Because HD-PLC technology makes use of the existing electrical wiring in your

home, there’s no need to run cables between rooms.

Easy to expand

Up to 16 adaptors in all can be used, which means you can add additional adaptors

whenever you need to add a network connection in another room of the house.

Simple network speed testing

You can confirm the speed of each adaptor's HD-PLC connection by simply

pressing a button.

Fast, reliable, and secure

With speeds of up to 190 Mbps (PHY rate)*1, advanced error correction, and AES

128-bit encryption, the BL-PA100 provides peace of mind at the speed of light.

For more information about how HD-PLC works, see page 8.

*1 This is the theoretical maximum data transmission speed of the HD-PLC standard. The actual

maximum data transmission speed is about 70 Mbps for UDP and 42 Mbps for TCP. Results

may vary depending on electrical conditions, network environment, and other factors. See the

specifications for more information.

Introduction

Included items

Confirm that the following items are included with this product.

Available accessories

You can add additional adaptors as necessary. Up to 16 adaptors in all (including

the 2 adaptors included with this product) can be used.

Abbreviations

• This product is referred to as “the adaptor” in this document.

Trademarks

•Linux

®is the registered trademark of Linus Torvalds in the U.S. and other

countries.

• All other trademarks identified herein are the property of their respective

owners.

HD-PLC Ethernet Adaptor ............... 2

(1 Master and 1 Terminal)

AC Cord ............................................. 2

Order No.: PSJA1106Z

- Important Information ..................... 1

- Getting Started ............................... 1

- CD-ROM ......................................... 1

BL-PA100 (Add-on Adaptor)

Introduction

IMPORTANT SAFETY INSTRUCTIONS

When using this product, basic safety precautions should always be followed to

reduce the risk of fire, electric shock, or personal injury.

1. Read and understand all instructions. Keep this document for future

reference.

2. Follow all instructions in this document and heed all warnings.

3. Do not install this product near any heat sources such as radiators, heat

registers, stoves, or other devices (including amplifiers) that produce heat.

4. Protect the AC cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from this product.

5. The AC cord is used as the main disconnect device. Ensure that the AC outlet

is located/installed near the product and is easily accessible.

6. Use only the included AC cord.

7. The AC cord must remain connected at all times. (It is normal for this product

to feel warm during use.)

8. To prevent the risk of fire or electrical shock, do not expose this product to rain

or any type of moisture.

9. Do not touch the product or the AC cord during lightning storms.

10. Unplug this product when unused for a long period of time.

11. Refer all servicing to qualified service personnel. Servicing is required when

the unit has been damaged in any way, such as when the AC cord or plug is

damaged, the unit does not operate normally, or after the unit has been

dropped.

12. Do not use this product outdoors.

13. Unplug this unit from power outlets if it emits smoke, an abnormal smell or

makes unusual noise. These conditions can cause fire or electric shock.

Confirm that smoke has stopped and contact an authorised service centre.

SAVE THESE INSTRUCTIONS

Introduction

Disposal information

This symbol on the products and/or accompanying documents

means that used electrical and electronic products should not be

mixed with general household waste.

For proper treatment, recovery and recycling, please take these

products to designated collection points, where they will be

accepted on a free of charge basis. Alternatively, in some

countries you may be able to return your products to your local

retailer upon the purchase of an equivalent new product.

Disposing of this product correctly will help to save valuable resources and

prevent any potential negative effects on human health and the

environment which could otherwise arise from inappropriate waste

handling. Please contact your local authority for further details of your

nearest designated collection point.

Penalties may be applicable for incorrect disposal of this waste, in

accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact

our dealer or supplier for further information.

Information on Disposal in other Countries outside the

European Union

his symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or

dealer and ask for the correct method of disposal.

Information on Disposal for Users of Waste Electrical &

Electronic Equipment (private households)

Introduction

Electrical environment information

HD-PLC adaptors communicate with each other using the existing electrical wiring

in your home, and may be affected by electrical noise or the length of your home’s

wiring. Keep the following in mind when placing each adaptor.

AC outlets

For best results, we recommend connecting the adaptors directly to a wall outlet.

Avoid connecting high power-consuming appliances to the same wall outlet.

Additionally, connecting an adaptor to a uninterruptible power supply (UPS) or

backup power supply device is not recommended.

While connecting the adaptors to a wall outlet is recommended, keep the following

in mind if you must connect an adaptor to a power strip:

• Make sure the power strip does not have a noise filter or a surge protector,

as these features may interfere with the performance of your adaptors.

• Do not connect the adaptor to a power strip that receives power from

another power strip.

• Use a power strip with an AC cord that is as short as possible.

Electrical interference

Certain electrical devices emit electrical noise. If this noise is passed on to the

electrical wiring in your home, it may interfere with the performance, speed, and

reliability of your adaptors. For best results, we recommend connecting an

electrical noise filter to noise emitting appliances.

The following appliances are more likely to produce noise:

• Battery chargers (including cell phone chargers)

• Hair dryers

• Vacuum cleaners

• Lights or lamps which have a dimmer switch or a touch-sensitive on/off feature

• Power drills

Additionally, this product may interfere with the following appliances:

• Short wave radios

• Lights or lamps which have a touch-sensitive on/off feature

Electrical wiring

HD-PLC adaptors communicate with each other using the existing electrical wiring

in your home. If 2 wall outlets are separated by a great length of electrical wiring,

the adaptors connected to those outlets may not be able to communicate with each

other.

For more information, refer to the troubleshooting section (see page 16) or access

the Panasonic PLC Support Site at: http://panasonic.co.jp/pcc/products/en/plc/

After you have placed the adaptors where you plan to use them and plugged them

into the wall outlets, test the terminal’s network speed (see page 12).

Introduction

Security information

1. With any network connection, security is a concern. This product provides

security to prevent unauthorised access to your network.

• Only terminals that are registered to the master adaptor can

communicate with the network.

• A terminal may be registered to the master only if the SETUP buttons

on the master and terminal are pressed within 5 seconds of each other.

2. Data sent and received over the HD-PLC network employs AES 128-bit

encryption, however we cannot guarantee that data will not be intercepted by

a third party.

3. For security, reset your adaptors (see page 14) in the following situations.

• If you are concerned that another adaptor may have been accidentally

registered to your master (for example, the adaptor of someone who

lives in the same apartment building as you), reset each of your

adaptors and register them again.

• If you discard an adaptor, give an adaptor to someone else to use, or

send an adaptor for servicing, reset the adaptor first.

• If you lose an adaptor, reset your remaining adaptors and register them

again.

Security notices for when sending an adaptor for

service

Please note the following when sending an adaptor for servicing.

• Reset the adaptor before sending it for servicing.

• After your master adaptor is serviced, you must register all your

terminals to the master again.

• After a terminal adaptor is serviced, you must register the terminal to the

master again.

Introduction

How does it work?

Each HD-PLC adaptor has an AC cord that plugs into a wall outlet. This connection

not only powers the adaptor, but also allows the adaptor to communicate with the

other adaptors in your home using your existing electrical wiring. Each adaptor also

has a LAN jack, which connects each adaptor to your broadband router, hub,

computer, network printer, network camera, etc.

Once your adaptors are registered, simply plug them into the wall outlets around

your home. (The included adaptors are already registered. To register additional

adaptors, see page 15.) Finally, connect the master adaptor to your broadband

internet router or modem, and then connect the other adaptors to your network

devices (computers, network printers, network cameras, etc.). When you’re

finished, your network devices will be able to access the internet as well as each

other.

Example of an integrated HD-PLC network

Master and terminal adaptors

Before using your adaptors, it is important to understand the concept of a “master”

adaptor and a “terminal” adaptor.

An HD-PLC network contains at least 2 adaptors. One (and only one) adaptor

must be configured as the master. All other adaptors are configured as

terminals. (A maximum of 15 terminals per network is recommended.) An adaptor

is configured as either a master or a terminal during registration (see page 15). For

simplicity, we recommend configuring the adaptor that is directly connected to one

of your router’s LAN ports as the master.

INTERNET

Master

Network printer

Wall outlet Wall outlet

Wall outlet

Hub

Network camera

Modem

Router PC

Terminal

(Add-on adaptor)

Terminal

Introduction

Main unit

(1) MASTER Seal (master adaptor only)

Indicates which adaptor is pre-configured as the master adaptor.

(2) PLC Indicator

Lights to indicate that the adaptor is connected to the HD-PLC network. For

more information, see page 13.

(3) LAN Indicator

Lights when a LAN cable is connected to the adaptor, and flashes when

data is being sent or received. For more information, see page 13.

(4) MASTER Indicator

Lights when the adaptor is configured as the master. For more information,

see page 13.

(5) SETUP Button

Used to register the adaptor (see page 15) or test the terminal’s network

speed (see page 12).

(6) Mode Selector

The position of this selector during registration (see page 15) determines

whether the adaptor is configured as the master or as a terminal.

(7) AC IN

Connects the adaptor to AC power as well as to the HD-PLC network.

(8) FACTORY DEFAULT RESET Button

Used to reset the adaptor and erase its registration (see page 14).

(9) LAN Jack

Connects the adaptor to a network device, such as a broadband router, hub,

computer, etc. (see page 11).

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

Installation

Placing the adaptors

Refer to the information on page 6 when selecting a location to place your

adaptors.

Note

• If you have purchased additional adaptors, make sure you have registered

them to the master (see page 15) before placing them where you plan to use

them.

1. Connect the AC cord of each adaptor to a wall outlet near where you plan to

use it.

2. Confirm that the PLC indicator of each adaptor lights in blue when you plug

the adaptors into the wall outlets.

•IfthePLC indicators do not light in blue, see page 16.

After you have placed the adaptors where you plan to use them and plugged them

into the wall outlets, test the terminal’s network speed (see page 12).

Autres manuels pour BL-PA100KT

Table des matières

Autres manuels Panasonic Adaptateur

Panasonic

Panasonic AJCA910 - 4 CH AUDIO ADA Manuel utilisateur

Panasonic

Panasonic BLPA300A - HD-PLC ETHERNET ADAPTOR Mode d’emploi

Panasonic

Panasonic AG-MYA30G - XLR Mic Adaptor Manuel utilisateur

Panasonic

Panasonic DE-852D Manuel utilisateur

Panasonic

Panasonic CF-AA5713A Series Manuel utilisateur

Panasonic

Panasonic WV-PS03 Manuel utilisateur

Panasonic

Panasonic BB-HCA3 Manuel utilisateur

Panasonic

Panasonic CF-AA Series Manuel utilisateur

Panasonic

Panasonic AW-PS600 Manuel utilisateur

Panasonic

Panasonic BL-PA300KTA - High Definition Power Line Communication Ethernet Adaptor... Manuel utilisateur

Panasonic

Panasonic WVAD36 - CL CAMERA ACCESS Manuel utilisateur

Panasonic

Panasonic AWML600 - MULTIPLEX CONTROLER Manuel utilisateur

Panasonic

Panasonic DMW-USBC1 Manuel utilisateur

Panasonic

Panasonic Palmcorder PV-DAC9 Manuel utilisateur

Panasonic

Panasonic AJ-B95 Manuel utilisateur

Panasonic

Panasonic CF-AA6503A Manuel utilisateur

Panasonic

Panasonic CF-AA6503A2 Manuel utilisateur

Panasonic

Panasonic CYZAC50N Manuel utilisateur

Panasonic

Panasonic DM0706SY0 Mode d’emploi

Panasonic

Panasonic DMW-DCC12 Manuel utilisateur

Panasonic

Panasonic AW-PS301 Manuel utilisateur

Panasonic

Panasonic AXA1A100 Manuel utilisateur

Panasonic

Panasonic AG-CA300G Manuel utilisateur

Panasonic

Panasonic WV-PS31 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur