Panasonic DM0706SY0 Mode d’emploi

PQQW15408ZA DM0706SY0

LConnect the AC adaptor and telephone line cords and charge the battery for 7 hours

before initial use.

LPlease read this FAQ’s Guide before using the unit and save for future reference.

Call waiting (using the recall button)

FAQ’s Guide

Frequently asked questions

Question Cause & solution

How do I answer

the 2nd call when I

am talking with

someone?

How can I use the

call waiting service?

LPress {RECALL}{2}whilst on call 1, this will switch to 2nd

call, press {RECALL}{2}again to alternate between calls or

return to 1st call, or {RECALL}{1}to terminate current call.

Call waiting is a service provided by your service provider/

telephone company. For additional information on the use of

this service contact your service provider/telephone company.

How can I make a

conference call?

Conference call with an outside call

When the other handset is on an outside call, press {LINE1}or

{LINE2}on the additional handset that is being used by another

handset to join a conversation “CALL SHARE”.

Press {INTERCOM}and the extension number of the other

person that you desire to join the outside call. When the paged

party answers, press {CONF}to activate the conference call.

Conference call with 2 outside calls

1During an outside call, press {HOLD}2 times.

2To answer a 2nd call, press {LINE1}or {LINE2}.

To make a 2nd call, press {LINE1}or {LINE2}, then dial the

phone number.

3When the 2nd call is connected, press {CONF}to make a

conference call.

If you subscribe to the conference call service provided by your

service provider/telephone company, please consult your service

provider/telephone company for full instructions on this feature.

TG6700AL_FAQ_Leaflet.fm Page 1 Monday, May 15, 2006 4:33 PM

–2 –

Battery charge

Range/Distance (“No link to base.”)

Why call waiting

does not work when

I press {RECALL}?

LYou may be required to change the recall time to “90ms”.

(Default: “100ms”)

LMake sure you have subscribed to the call waiting service.

Consult your service provider/telephone company.

Question Cause & solution

How do I charge the

battery?

LMake sure that the battery is properly installed in the handset

and the cover is closed. Place the handset on the base unit or

charger and confirm “Charging” is displayed.

LIt takes approx. 7 hours to charge the empty battery (see front

page). When it is fully charged, “Charge completed” is

displayed.

Can I leave the

handset on the

base unit or charger

after battery is fully

charged or each

call is finished?

LYou can place the handset on the base unit or charger

anytime. Battery is not overcharged and there is no damage

to the battery. By placing the handset on the base unit or

charger, it is always fully charged.

Where can I buy

new battery?

LBattery can be purchased through your local retailer.

Question Cause & solution

What is the range/

distance of my

cordless phone?

(Why am I getting

short or poor range/

distance on my

cordless phone?)

Why is “No link

to base.”

displayed on the

handset when I

press {C}?

LRange/distance is related to technology and environmental

factors. Therefore we cannot provide a given range or

distance.

LMake sure that the AC adaptor is properly connected to wall

socket and to the base unit and that beep tones sound when

you page the handset from the base unit.

LMove closer to the base unit (Allow up to 60 seconds for the

handset to reassign to the base unit.).

LIf you try manual registration process, allow up to 60 seconds

for the handset to reassign to the base unit.

LIf the above remedies do not solve the problem, refer to the

troubleshooting section in your Operating Instructions for

more information.

Question Cause & solution

TG6700AL_FAQ_Leaflet.fm Page 2 Monday, May 15, 2006 4:33 PM

–3 –

ADSL Issues (Noise on line)

Registration (Adding new handset)

Question Cause & solution

Why am I getting

noise on my

telephone line?

LIf you subscribe to ADSL service, we recommend you to

attach an ADSL filter to the telephone line between the base

unit and the telephone line socket. Contact your ADSL

service provider or purchase an ADSL filter from a retailer or

store. Refer to troubleshooting section for further details.

LIf you do not subscribe to ADSL service, there may be an

environmental issue that is causing the interference (noise).

Move closer to the base unit and check whether there is

noise. If there is no noise, some environmental interference

has caused the noise.

LIf there is noise intermittently, there is a possibility of

environmental interference. Refer to the troubleshooting.

Question Cause & solution

How can I register a

handset to the base

unit?

LMake sure that you follow registration procedure in Operating

Instructions:

– you are using the supplied handset that comes with the kit

(KX-TGA670AL).

– the AC adaptor is connected to the base unit.

– the handset is charged and not placed on the base unit.

– note the location of Intercom button on the base unit as this

is used to start registration process and is required to be

pressed for 3 seconds until IN USE indicator flashes and/or

single beep tone is heard.

Which handsets

can I buy to use

with this model?

LThe optional handset is KX-TGA670AL.

TG6700AL_FAQ_Leaflet.fm Page 3 Monday, May 15, 2006 4:33 PM

1Read the Operating Instructions or this

FAQ’s Guide.

2Visit our website:

http://www.panasonic.com.au

3Contact us via the web at:

http://www.panasonic.com.au/support/

Replacement batteries can be purchased from

your retailer.

IMPORTANT!

If your product is not

working properly. . .

TG6700AL_FAQ_Leaflet.fm Page 4 Monday, May 15, 2006 4:33 PM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Panasonic Adaptateur

Panasonic

Panasonic CF-AA6413C Manuel utilisateur

Panasonic

Panasonic AW-PS600 Manuel utilisateur

Panasonic

Panasonic BB-HCA3 Manuel utilisateur

Panasonic

Panasonic Palmcorder PV-A18 Manuel utilisateur

Panasonic

Panasonic CF-AA5713A Manuel utilisateur

Panasonic

Panasonic AW-PS300 Manuel utilisateur

Panasonic

Panasonic FZ-AAE184E1 Series Manuel utilisateur

Panasonic

Panasonic DY-WL5 Manuel utilisateur

Panasonic

Panasonic CF-AA5713A Series Manuel utilisateur

Panasonic

Panasonic KX-TGA575S Mode d’emploi

Panasonic

Panasonic PV-DAC14 Manuel utilisateur

Panasonic

Panasonic CZ-TACG1 Manuel utilisateur

Panasonic

Panasonic WV-PS31 Manuel utilisateur

Panasonic

Panasonic et-adser Manuel utilisateur

Panasonic

Panasonic AW-PS600 Manuel utilisateur

Panasonic

Panasonic Palmcorder PV-DAC9 Manuel utilisateur

Panasonic

Panasonic AK-HBA3500G Manuel utilisateur

Panasonic

Panasonic CYZAC50N Manuel utilisateur

Panasonic

Panasonic AG-MYA30G - XLR Mic Adaptor Manuel utilisateur

Panasonic

Panasonic AJ-B95 Manuel utilisateur

Panasonic

Panasonic WV-QAT502-W Manuel utilisateur

Panasonic

Panasonic KV-SSM100 Manuel utilisateur

Panasonic

Panasonic CA-PANSC1U Manuel utilisateur

Panasonic

Panasonic AWML600 - MULTIPLEX CONTROLER Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur