Palintest Pooltest 4 Manuel utilisateur

Pooltest Pooltest 3

Pooltest 4

Pooltest 6

User Manual

ZIINST49

Swimmer safety

Safeguard pool users through effective

disinfection and water balance control

Pool integrity

Regular pool testing helps maintain your

pool and protects the pool infrastructure

Water balance

Maintain optimum water balance to

avoid corrosion or scaling

Cost efficiency

Optimise your pool treatment plan

Backed by over 100 years of research, our equipment has

been designed to make testing simple and easy.

Our technology delivers reliable results, to drive confident

water quality management, ensuring that we can all bathe

and play safely.

At Palintest we deliver:

Contents

Getting Started 4

Instrument Layout and Buttons 4

How to Select and Perform a Test 6

Error Messages 9

Cleaning the Optics 10

Check Standards 10

Accessing the Memory 11

Procedures for Testing 12

How to Get Accurate Results 12

Blanking 14

Sample Dilution 14

Table of Tests 15

Test Instructions 16

Chlorine 16

pH 20

Cyanuric Acid 22

Total Alkalinity 24

Calcium Hardness 26

Bromine 28

Water Balance 30

Procedure 30

Calculation 30

Interpreting the Result 31

Technical Specifications 32

Pooltest

Getting Started

Thank you for choosing a Palintest Pooltest Photometer. Please

take time to read this manual and only use this instrument for

its intended purposes. This instrument is waterproof to IP67.

However, for optimum performance please ensure it is clean

and dry before use.

Cell holder for test tubes

Replace Batteries if

this icon appears

Backlit Screen

(To switch backlight on

or off, hold down the

On/Off button when

turning instrument on)

“Read” button

“On/Off” button

“Blank” button

“Menu” button

This also allows access

to the memory, see

Accessing the Memory.

www.palintest.com

Made in UK

01234567890Serial Number

Battery Cover:

Please take care not

to damage gasket

when replacing the

2 x AA batteries

6How to Select and Perform a Test

This is the basic procedure for all tests. For specific test details

see Test Instructions.

Pooltest

Select a test by pressing

the Menu key. Scroll

through the list until the

desired test is highlighted.

Place a test tube

containing pool or spa

water (without test

tablets) in the cell holder.

Pooltest

Press the blank key.

The screen will show

that the instrument is

measuring the blank.

Blanking enables the instrument to set the correct zero value.

This ensures the final result will be accurate, even when testing

water that is cloudy or coloured.

The blank value is held in memory. However, blanking

should be performed again each time a new sample is

taken from the pool or spa.

Prepare a 10mL

sample by adding

reagents according to

the Test Instructions.

Place this sample tube

in the cell holder.

Pooltest

Press the

“read sample” key

The screen will show that

“reading” is in progress.

When complete a result

will appear on screen.

Error Messages

An error message means the instrument has detected

something wrong when making an optical measurement.

A common cause is contamination in the optics. Cleaning the

optics (see Cleaning the Optics) is therefore recommended

when any error message occurs.

If error messages E1 to E6 appear during testing, try cleaning

the optics (see Cleaning the Optics on the following page) or

contact your local Palintest Branch or Distributor.

External light is entering the test cell, or there is

contamination affecting the internal light path.

Clean the optics (see below), clean the test tube,

ensure light cap is fitted correctly and use

instrument away from bright light.

E8 Indicates a fault in an optical component. Instrument

requires a service and recalibration.

Insufficient light received during blanking. Check that

the ‘blank’ is the correct tube. Remove any debris

obstructing light in the cell holder and clean the optics

(following page).

10 Cleaning the Optics

Contamination in the optical cell may effect the accuracy of

readings and can trigger error messages to be displayed.

Clean optical windows gently with a soft, non-abrasive cloth

dampened with water. Do not use solvents.

Instrument failure due to contamination is not covered by warranty.

Check Standards

Sets of Check Standards for Pooltest Instruments are

available from Palintest. These verify that the instrument

is correctly calibrated and performing correctly.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels palintest Instrument de mesure

palintest

palintest Lumiso Pooltest Expert Manuel utilisateur

palintest

palintest PT155 Manuel utilisateur

palintest

palintest Lumiso Chlorine Manuel utilisateur

palintest

palintest Wagtech Potalab+ (C) XA Manuel utilisateur

palintest

palintest Photometer 7500 Manuel utilisateur

palintest

palintest Wagtech Potalab+ (M) Manuel utilisateur

palintest

palintest Kemio Manuel utilisateur

palintest

palintest Wagtech Potalab+ (C) Manuel utilisateur

palintest

palintest Green Drop Kit Manuel utilisateur

palintest

palintest Lumiso Ammonia Manuel utilisateur

palintest

palintest MICRO 500 Manuel utilisateur

palintest

palintest Compact Ozone Meter Manuel utilisateur

palintest

palintest DigiPAsS Manuel utilisateur

palintest

palintest Photometer 7100 Manuel utilisateur

palintest

palintest Lumiso Pooltest 3 Manuel utilisateur

palintest

palintest Pooltest 25 Manuel utilisateur

palintest

palintest Pooltest 25 Manuel utilisateur

palintest

palintest Micro 600 Manuel utilisateur

palintest

palintest SA1100 Manuel utilisateur

palintest

palintest Micro 800 Manuel utilisateur

palintest

palintest Macro 900 Manuel utilisateur

palintest

palintest ChloroSense CS 100 Manuel utilisateur

palintest

palintest Micro 800 Manuel utilisateur

palintest

palintest Micro 600 COND Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur

palintest Pooltest 4 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques