P.AP. Team TINOX Manuel utilisateur
FRAME USER MANUAL
FLY PAP, FLY THE ORIGINAL
SINCE 1989
WARNING: Not foowing the steps, indicated in the photo beow, coud damage
parts of the frame.
A the parts have to fit together without any effort. Pease contact your deaer or
us in case they do not, we wi have to anayze the probem.
Piot Manua for TINOX frame - PAP Team Paramotors
ASSEMBLY OF THE
TINOX FRAME
Your TINOX is neary ready to fy, you wi ony have to assemby the frame and the
propeer. Once you have foowed a the steps do not forget to do the pre-fight check
before each take off.
3
VIDEO
1º
3º
2º
4º
Piot Manua for TINOX frame - PAP Team Paramotors
Attach the down curve cage
section.There are two identica
cage sections, you can start with any of
them. To attach it press the pin and
insert it genty unti the pin cicks into
the hoe.
Attach the upper to the midde
section. You wi have to wait
unti you attach the upper part to adjust
it on the nyon guide.
Be sure that the net is not tight.
Attach the upper part.There are
two identica cage sections
meaning you can start with any of them.
To attach it press the pin and insert it
genty unti the pin reach the hoe.
To mount the outer sides, you wi
have to adjust the down part on
the nyon guide unti it matches with
the upper part.
4
ASSEMBLY
Lasty, bring the whoe top of the
outer cage together by joining
the two top parts.
5º
7º
6º
Piot Manua for TINOX frame - PAP Team Paramotors
ASSEMBLY
Once you have finished to mount
everything cose the 3 cips. Make
sure that they are we secured.
Tight the net with your hands
unti you have good tension.
Do not over tightening the net, this
coud damage your frame.
ATTACH THE PULL START
1Insert the push-pin on the hoe of the
frame pressing the button.
Aways attach the pu start before
the propeer.
2Side the shacke of the puey on the
push-pin and cose the push-pin with
the cap pressing the button.
5
WARNING: The tensioners of the
upper part wi ony be used when the
net comes oose due that the part has
been bent.
You don't have to touch it to mount
and dismount the frame.
ATOM 8
SAFARI 125
MOSTER 185
POLINI
SIZE
BOLTS
E-PROPS: 6x6mm
HELIX: 6x55mm
E-PROPS: 6x7mm
HELIX: 6x55mm
E-PROPS: 6x6mm
HELIX: 6x5mm
E-PROPS: 8x5mm
HELIX: 8x35mm
Piot Manua for TINOX frame - PAP Team Paramotors
ASSEMBLY AND MOUNTING OF THE
PROPELLER
1Lay your two propeer bades on the ground with the PAPTeam or brand stickers
facing upwards. Side the two propeer bades together ensuring the mounting
hoes aign perfecty.
2Insert your six propeer bots into the propeer pate. Aign bots with the
mounting hoes and insert into the propeer. If required, make sure the Vittorazi
spacer is fitted behind your propeer.
3Use the Aen key required for the bots and fit your propeer tightening the bots
in a diagona pattern sowy and eveny across the hub.
Tightening torque at pag.13 .
6
WARNING: The propeer spacer is ony mandatory with the Moster 185 and the
Heix propeer with the thin hub.
VIDEO
WARNING: Not foowing the steps indicated in the photo beow coud damage the
parts of the frame.
A the parts have to fit together without any effort. Pease contact your deaer or
us in case they do not, we wi have to anayze the probem.
Piot Manua for TINOX frame - PAP Team Paramotors
DISASSEMBLY OF THE
TINOX FRAME
To dismount the frame, you wi have to foow the steps of the assemby but in reverse.
7
Many of the parts coud have
variations where the
references might change,
this is just an exampe of
what the references coud be.
Piot Manua for TINOX frame - PAP Team Paramotors
FRAME PARTS
8
WARNING: The ATS wi determine your body position in fight, not the shacke. The
shacke is the one that hods the gider.
Piot Manua for TINOX frame - PAP Team Paramotors
ADJUST YOUR ATS
The ATS wi aow you to adjust miimetricay your position in fight for maximum
comfort in the air. A bad position in fight wi give you more chances to have a bad
anding and damage your equipment.
The paramotor is shipped with the ATS dismounted from the arms. To mount it you
wi ony need a 4mm Aen key and foow this steps:
1To mount the ATS, unfasten the 5mm bots and set-up the ATS to the desired
position on the arms. Check it on the page 1
2Once the ATS is ocated on the required position, ock the ATS by tightening the
screws to 6 Nm.
To change the position of the ATS you ony have to untighten the screws and
side it, not remove them.
9
WARNING: The foowing guide is for an initia reference point ony. We recommend
you to be supervised by your instructor and test it by hanging in a simuator before
your first fight.
After the first fight you might have to readjust it, unti you find the position for
maximum comfort.
ATOM 8
5kg - 55kg
MOSTER 185
65kg - 7kg
THOR 22
75kg - 8kg
THOR 33
8kg - 85kg
MOSTER 185
55kg - 65kg
THOR 22
7kg - 75kg
THOR 33
75kg - 8kg
ATOM 8
55kg - 65kg
MOSTER 185
7kg - 8kg
THOR 22
8kg - 9kg
THOR 33
85kg - 95kg
ATOM 8
65kg - 75kg
MOSTER 185
8kg - 9kg
THOR 22
9kg - 1kg
THOR 33
95kg - 15kg
ATOM 8
75kg - 85kg
MOSTER 185
9kg - 1kg
THOR 22
1kg - 11kg
THOR 33
15kg or more
ATOM 8
85kg or more
MOSTER 185
1kg or more
THOR 22
11kg or more
Piot Manua for TINOX frame - PAP Team Paramotors
PILOT WEIGHT GUIDE
1
WARNING: When you're going to fy with the Roing trike with Standard whees you
have to move forward 2cm / 1 point the ATS. With the Roing trike with thin
whees or the Mini Roing we recommend you to move forward 1cm.
Autres manuels pour TINOX
1
Table des matières
Autres manuels P.AP. Team Paramoteur
P.AP. Team
P.AP. Team TINOX Manuel utilisateur
P.AP. Team
P.AP. Team RM80 Manuel utilisateur
P.AP. Team
P.AP. Team THOR202 Manuel utilisateur
P.AP. Team
P.AP. Team THOR303 Manuel utilisateur
P.AP. Team
P.AP. Team THOR 200 Manuel utilisateur
P.AP. Team
P.AP. Team RM80 Manuel utilisateur
P.AP. Team
P.AP. Team THOR250 Manuel utilisateur
Manuels Paramoteur populaires d'autres marques
Sky Country
Sky Country RESCUE SC-25 Manuel utilisateur
FLY
FLY TRIKE-FLASH Manuel utilisateur
Parajet
Parajet Volution Micro Manuel utilisateur
Cruise Carbon
Cruise Carbon INSTINCT Guide rapide
Fly Products
Fly Products FLASH 100 Manuel utilisateur
Opale-Paramodels
Opale-Paramodels Backpack XXS3 Manuel utilisateur
