OXO ColorBeam 90 Manuel utilisateur

INSTRUCTION MANUAL

MODE D’EMPLOI

FOR YOUR OWN SAFETY, PLEASE READ THIS INSTRUCTION MANUAL

CAREFULLY BEFORE YOU INITIALLY START-UP

POUR VOTRE SÉCURITÉ, MERCI DE LIRE ATTENTIVEMENT

CE MODE D’EMPLOI AVANT D’UTILISER VOTRE PRODUIT

V1.1 04/2018

ColorBeam 90

ENGLISH

COLORBEAM 90 - USER INSTRUCTION Page

1. In the box 4

2. Instructions 4

3. Overview 5

4. Operation guide 6

5. Technical data 17

6. Dimensions 17

FRANÇAIS

COLORBEAM 90 - MODE D’EMPLOI Page

1. Dans la boîte 18

2. Instructions 18

3. Vue d’ensemble 19

4. Utilisation 20

5. Données techniques 31

6. Dimensions 31

User Manual - COLORBEAM 90 V1.1 04/2018 4/32

1. In the box

• 1 ColorBeam 90

• 1 waterproof powerCON cable

• 1 IR remote control

• 1 Instruction Manual

2. Instructions

WARNING

• Read the instruction in this manual carefully and thoroughly, as they give important

information regarding safety during use and maintenance. Keep this manual with the unit,

in order to consult it in the future. If the unit is sold or given to another operator, make

certain that it always has its manual, to enable the new owner to read about its operation

and relative instructions.

• To prevent ﬁre or shock hazard, do not expose this product under a high temperature This

product must be earthed.

• Take care not to damage the power cord.

• After having removed the packaging check that the unit is NOT damaged in any way.

• If in doubt, DON’T use it and contact an authorized dealer.

• NEVER use the unit under the following conditions:

- In places subject to vibrations or bumps.

- In places with a temperature of over 40 °C or less than 0 °C.

• DO NOT open the unit-there are no user serviceable parts inside.

• NEVER try to repair the unit yourself. Repairs by unqualiﬁed people could cause damage

or faulty operation. Contact your nearest dealer.

• Wait for at least one second to turn on the power after turning off this unit.

• Packaging material (plastic bags, polystyrene foam, nails, etc.) MUST NOT be left within

children’s reach, as it can be dangerous.

• STOP using the unit immediately In the event of serious operation problems and either

contact your local dealer for a check or contact us directly.

• DO NOT dismantle or modify the unit.

• If in doubt, DON’T use it and contact an authorized dealer.

• This unit must only be operated by adults. DO NOT allow children to tamper or play with it.

User Manual - COLORBEAM 90 V1.1 04/2018 5/32

3. Overview

3 1 6 2 4 5

1. Power supply IN (waterproof powerCON)

2. Power supply OUT (waterproof powerCON)

3. DMX IN (waterproof XLR 5)

4. DMX OUT (waterproof XLR 5)

5. Display

6. Button «Menu / Down / Up / Enter» to navigate and change value in Menu

User Manual - COLORBEAM 90 V1.1 04/2018 6/32

4. Operation guide

A- Default display after start

This part deﬁne all the display you could have by default, those display let you see directly

the state of the product.

DMX 001

7 CH If DMX MODE display DMX Address and DMX Mode

MANUAL

MODE Display if in MANUAL MODE

MACRO

ULTIMATE VIOLET - 707

Display if using prediﬁned Macros

MACRO

CUSTOM 01 Display if using user Custom Macro

SLAVE

MODE Display if in SLAVE MODE

B- Menu

To navigate thru menu use «up» and «down» button.

To validate and enter menu use «enter».

To get out menu use «menu».

1- DMX address

001

DMX ADDRESS

Change DMX Address value from 001 to 512

2- DMX address

03 CH

DMX MODE

Change DMX Mode

3 Modes availables 03 CH, 07 CH, 11 CH

User Manual - COLORBEAM 90 V1.1 04/2018 7/32

3- MANUAL Mode To choose values of MANUAL MODE

Dimmer

001 Change Dimmer value from 000 to 255

RED

001 Change Red value from 000 to 255

GREEN

001 Change Green value from 000 to 255

BLUE

001 Change Blue value from 000 to 255

WHITE

001 Change White value from 000 to 255

AMBER

001 Change Amber value from 000 to 255

001 Change UV value from 000 to 255

SHUTTER

001

Change Shutter value from 000 to 255

4- MACRO Mode To choose values of MACRO MODE

4.1- MACRO

DIMMER

000

Change Dimmer value of Macros from 000 to 255

4.2- MACRO

ULTIMATE VIOLET - 707

Choose Macros color from 1 to 54

4.3- MACRO Speed

01 Change Speed of Macros from 01 to 99

Only available for dynamic macros 48 to 54

User Manual - COLORBEAM 90 V1.1 04/2018 8/32

4.4- CUSTOM MACRO

To choose a CUSTOM MACRO

4.5- EDIT CUSTOM MC To edit a CUSTOM MACRO

4.5- EDIT CUSTOM MC

show 01 Select which Custom Macro to edit from 1 to 11

Edit show 1

SC 01 Select which scene of Custom Macro to edit from 1 to 32

Edit show 1 - SC 1

Dimmer

001

Change value of Dimmer

Edit show 1 - SC 1

RED

001

Change value of Red

Edit show 1 - SC 1

GREEN

001

Change value of Green

Edit show 1 - SC 1

BLUE

001

Change value of Blue

Edit show 1 - SC 1

WHITE

001

Change value of White

Edit show 1 - SC 1

AMBER

001

Change value of Amber

Edit show 1 - SC 1

001

Change value of UV

Edit show 1 - SC 1

SHUTTER

001

Change value of SHUTTER

Edit show 1 - SC 1

FADE TIME

001

Fade time between 2 scenes

User Manual - COLORBEAM 90 V1.1 04/2018 9/32

Edit show 1 - SC 1

FLASH TIME

001

Delay between 2 scenes

Edit show 1 - SC 1

REPEAT

001

Number of repeated scene

4.6- UPLOAD

CUSTOM MC

To upload Custom Macro to other products

5- SLAVE Mode

OFF

To choose SLAVE MODE

See «Master/Slave» Mode topic here after

6- SETTINGS To set up product feature

6.1- ID NUMBER

OFF

To choose the ID number of the product for ID address

feature

See «ID Address» topic here after

6.2- NO DMX

HOLD

Deﬁne product behaviour after a DMX break

HOLD : keep the last DMX value

BLACKOUT : Go to dark

MACRO : Go to the last Macro used

6.3- DP BACKLIGHT

1min Deﬁne the time before Display goes Dark

1min / NEVER

6.4- DP KEYLOCK

OFF To enable KEYLOCK when display goes Dark

Push any button during 3s to unlock

6.5- RESET

YES To reset values to factory

6.6- REMOTE

OFF If OFF, then you can not use the IR REMOTE

If ON, then you can use the IR REMOTE

User Manual - COLORBEAM 90 V1.1 04/2018 10/32

7- INFO Display product info

7.1- TIME INFO

00020 h Display time

7.2- TEMP

THRESHOLD

55°

To choose Temp Threshold if temp is above this value

light output will go down

To change Temp Threshold push in sequence

ENTER - DOWN - UP - DOWN - UP - ENTER

7.3- MODEL

OXO

COLORBEAM 90

display model of product

7.4- SOFTWARE

V1.0.0 display software version of product

7.5- HARDWARE

H1.0.0 display hardware version of product

C- MASTER / SLAVE MODE

To use master slave mode, link product as a daisy chain with Master in ﬁrst position.

Then choose a mode for Master (DMX/MANUAL) and put every slave in SLAVE MODE/ON then

slave product will act as the master.

Table des matières

Langues :

Autres manuels OXO Projecteur

OXO

OXO COLORBEAM 150 BFX Manuel utilisateur

OXO

OXO ColorBeam 480 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur