Owon ZigBee SLC602 Manuel utilisateur

SLC602 ZigBee Wireless Switch

Quick Start Guide

1. Introduction

The SLC602 ZigBee Wireless Switch controls your devices such as

power relay, smart plug, etc.

2. Get to know your device

2.1. SLC602 at a glance

ON/OFF button

Reset button &

LED indicator

2.2. Buttons Introduction

ON/OFF button

Push to switch your device

Reset button

Return the device to default factory settings.

Set the device in pairing mode to pair with your device.

Release catch

Push and turn in the direction of the arrow to remove from the

back plate. This will allow battery fitment and replacement.

Release Catch

3. Get started

To get started, you will need:

A SEG-X3 Smart Gateway

A SLC601 power relay or another switchable device

A SLC602 Dimmer Switch (with 2 x AAA battery)

The mobile app

Then follow the steps below:

Step 1: Install the battery

Remove the device from its back plates as described previously, fit

the batteries and re-assemble.

Step 2: Check the switch status

Press the ON/OFF button and check if the LED indicator of the reset

button is flashing red.

Tip: if not, please return it to factory settings by using a pin key tool

to press and hold the reset button for ten seconds until the LED

indicator flashes twice.

Step 3: Select “Add new devices” in the menu of the app

Tip: for this step, you could also press the “Z” button of the gateway

for two seconds until the LED indicator turns solid blue.

Step 4: Use a pin key tool to press the reset button. Then the SLC602

will try to join the gateway. The LED indicator will flash three times.

Step 5: Check if the wireless switch has paired with the gateway by

pressing the ON/OFF button and checking if the LED indicator does

not light.

Tip: After pairing, if the LED still flashes when you press the ON/OFF

button then you need to repeat step 2.

Step 6: Bind with the SLC601 power relay

Ensure the SLC601 Power Relay is already setup and can be

controlled by the mobile app.

(1) Make sure the SLC601 is powered on.

(2) Go to the “Automation” section, tap “Edit” (Android phone) or

swipe from left to right (iPhone), tap the “identity” icon.

Tip: for this step, you could also use a pin key tool to press and hold

the reset button of the SLC601 Power Relay for three seconds.

(3) Press the reset button of the SLC602 Wireless Switch once until

the green LED flashes three times.

(4) When pairing is successful, the LED indicator of the SLC602

Wireless Switch will flash for three times and the LED indicator of

the SLC601 Power Relay will stop flashing.

You are now able to use the SLC602 Wireless Switch to control the

on/off status of the SLC601 power relay.

4. FAQ

Q1. How can I return this device to default factory settings?

A1: Use a pin key tool to press and hold the reset button for ten

seconds until the LED indicator flashes twice.

Q2. What devices can be controlled by the SLC602 Wireless Switch?

A2: ZigBee devices including power relays, LED bulbs, smart plugs,

etc.

5. Technical Specifications

Wireless Connectivity

ZigBee 2.4GHz IEEE 802.15.4

RF Characteristics

Operating frequency: 2.4GHz

Range outdoor/indoor: 100m/30m

Internal PCB antenna

ZigBee Profile

Home Automation Profile

Battery

Type: 2 x AAA batteries

Voltage: 3V

Battery Life: 1 year

Dimensions

Diameter: 80mm

Thickness: 18mm

Weight

52g

6. Safety Notice

WARNING: Failure to follow these safety notices could

result in fire, electric shock, other injuries, or damage to

the device or other property. Read all the safety notices

below before using the device.

Avoid high humidity or extreme temperatures.

Avoid long exposure to direct sunlight or strong ultraviolet light.

Do not drop or expose the unit to intense vibration.

Do not disassemble or try to repair the unit yourself.

Do not expose the unit or its accessories to flammable liquids,

gases or other explosives.

Table des matières

Autres manuels Owon Changer

Owon

Owon SLC605 Manuel utilisateur

Owon

Owon SLC603 Manuel utilisateur

Owon

Owon SLC600-R Manuel utilisateur

Owon

Owon SES441 Manuel utilisateur

Owon

Owon SLC600-L Manuel utilisateur

Owon

Owon SLC627 Manuel utilisateur

Owon

Owon SLC628 Manuel utilisateur

Owon

Owon SLC600-D Manuel utilisateur

Owon

Owon SLC600-S Manuel utilisateur

Owon

Owon SLC620 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur