OVERWATCH XE22 Manuel utilisateur

Body Camera User’s Manual

XE22

USER MANUAL

Body Camera User’s Manual

Table of Content

Preface..........................................................................................................................................................3

Brief Introduction and Main Features .................................................................................................4

Buttons Description ..................................................................................................................................5

Interface Introduction .............................................................................................................................7

Operations...................................................................................................................................................8

Operation for BodycamTool.................................................................................................................12

Operations for 4G BodyCamera Connection ...................................................................................14

Specification..............................................................................................................................................20

Packing List ...............................................................................................................................................21

Body Camera User’s Manual

Preface

Thank you for using OverWatch Security. This manual is applicable for the ‘XE22’ Body Camera.

Please read the manual carefully before using the device. Please keep this manual for reference in

the future. The content of this manual is subject to be changed without notice.

Important notice

•Please keep the device from high temperature.

•When smoke, smell or noise comes out from the device, shut down the

power immediately, and contact your supplier in time.

•Please contact your supplier if the device is not working properly. No warranty

will be covered if the damage caused by unauthorized disassembly or repair.

•Please do NOT charge the device at high temperature over 45 degrees

Celsius, it could possibly cause the explosion of the battery. Please use the

certificated battery from the original factory ONLY.

•Please read this manual carefully before using the device, and follow

the instructions when using the device.

•Please do NOT kick or hit the product to avoid device damage and data missing.

•Keep the device away from high temperature and high humidity environment.

•Keep the device away from strong interference source.

•Please backup the data recorded by the device in time.

•Please keep the lens clean for good image quality.

•Please keep your user name and password safe.

Body Camera User’s Manual

Brief Introduction and Main Features

Brief introduction

The body cameras are the portable devices that can record video and audio. The devices can

also transmit live video and audio through 3G or 4G, do live tracking with GPS. The devices

have a TFT monitor and buttons on it and user can operate the device easily. The body

cameras are usually used by police man, security guard, and other law enforcement officers.

Main features

•The device is in compact size and suitable for portable use of recording.

•User can get live video and audio through 3G, 4G or WiFi.

•User can get live tracking of the device through built-in GPS in the device. The

GPS data will also be recorded into the record file with audio and video, so user

can get the location information in the record file.

•Use lithium battery for power supply. Device can be recording continuously for

10 hours.

•Built-in 32G storage space. (32G~128G optional storage space）

•Built-in 4 million pixel cameras, support recording at 1512P, 1440P, 1296P or

1080P resolution, support taking picture with 64M, 16M and 4M.

•Support IR. Support recording at night.

•Record file name have information on date, time, record type, which make it

easier for searching.

•User can explore, search and playback the files on the device.

•Support panic button. The panic button alarm can be sent to control center

through 3G/4G.

•Record encryption makes the evidence more safe.

•Support H.264 and H.265 video compression.

•Device can display device ID, user ID, date and time.

•Device can display information about battery usage, charging status, system time

and memory space. Device has light indication for power on, recording video or

audio. Green light indicates power on, red light indicates video recording, yellow

light indicates audio recording.

•Device can report event alarm, including alarm for battery running low,

insufficient memory space alarm etc.

•Device has log files. Device with log events that include power on/off, recording

video, recording audio, taking pictures, GPS status fixed, 3G/4G connection, and

WiFi connection.

Body Camera User’s Manual

Buttons Description

Body Camera User’s Manual

Buttons Description

Buttom

Icon

Action

Function

Short Press

When device is ON, short press to turn on/off the screen.

Power

Long press

When device is OFF, power on device when holding for over 3 seconds.

When device is ON, power off device when holding for over 3 seconds.

Talk

PTT

Short Press

Start talking back.

back

(Need to connect to interphone or server through internet★)

Short Press

Start recording when device is ON, Stop recording after pressing it again.

Record

Long press

Power ON and start recording when device is OFF.

Short Press

Start to snap.

Snap

Snap when device is recording and store the picture.

Long press

Holding for 3 seconds will turn on the flash light when device is ON.

Audio

Short Press

Start recording audio when device is ON.

Record

Switch to record audio when device is recording video.

Laser

Short Press

Turn on the laser when device is ON (only when laser is enabled in menu)

Long press

Holding for 3 seconds will turn on the IR (when IR is in manual mode)

SOS

Long press

Holding for 3 seconds to starts an alarm and recording, send the alarm to

server at the same time★

SIM

Insert /

Insert a SIM card into the slot and use 4G service to connect internet★

Eject

USB

Connect

For charging, data transmission, external camera, headset and interphone ect.

Menu/

Short Press

Display the main menu on the screen when device is in preview mode.

Confirm the setting changed.

Long press

Switch 1080P, 720P or other REC resolution in preview mode.

Short Press

Scroll up the menu or zoom out the view in preview mode.

Down

Short Press

Scroll down the menu or zoom in the view in preview mode.

When menu is displayed, press to return to the upper level menu;

Return /

Short Press

When device is idle, press to play back recorded video, audio and pictures.

3. When recording, press the button will mark the recording video as IMP file.

Play

Long press

Disable/Enable menu operaton when recording.

Body Camera User’s Manual

Indicator

LED Indicator

Colour

Description

ON：Charging complete

Indicator 1

Blue

Twinkling: Charging

OFF：Not charging

Green

Twinkling slowly：Idle

Twinkling faster: Face recognition is working

Indicator 2

ON: Live streaming or menu operating

Red

Video recording in progress

Yellow

Audio recording in progress

Interface Introduction

Body Camera User’s Manual

Operations

1. Power On/Off

When the device is OFF, holding the “Power” button for 3 seconds will turned on the device.

When the device is ON, short press the “Power” button will turn On/Off the monitor, press

and hold the “Power” button for 3 seconds will turn off the device.

2. Record Video

When device is ON, short press the “Record” button to start recording, the device will vibrate

once and indicator will turn red. When the device is recording, press the “Record” button again

will stop recording with vibration and beep.

When device is ON, holding the “SOS” button for 3 seconds to active the alarm system and

start recording.

When the device is OFF, holding the “record” button for 3 seconds will power on the device

and start recording video.

3. Record Audio

When the device is ON, press “Audio Record” button to start recording, the device will vibrate

once and the indicator will turn yellow. Press the “Audio Record” button again, the device will

stop recording.

4. Take Picture

When the device is ON, press “Snap” button to take pictures.

5. IR

When the IR setting is Manual, holding the “IR” button for 3 seconds can turn On/Off the IR

light; When the IR setting is Auto, the IR switchs according to the ambient light illumination.

When the IR is ON, the Bodycam’s view will be black and white.

6. Play Back

Short Press the “Return” button, the “Playback” menu will be displayed. Use “UP” and “DOWN”

button to choose the directory and file to play, The directories and files are named with date and

time. See the picture below, the directory of “20190101_20” means those videos in the folder is

recorded between 20:00 and 21:00 in the day of 2019/01/01, “203315” means the video is

generated at 20:33:15, “1030h” means that is a general video with 30fps@1080P.

6.1 Play back video files

In “Video” directory, there are directories named with date and hour, press “OK” button to

access the directories and press “OK” button to play back. The video format is AVI.

6.2 View the pictures

Body Camera User’s Manual

In the “Photo” directory, there are directories named with time. Choose the picture file and

press “OK” button to view the pictures. The picture format is JPG.

6.3 Play Audio

In the “Audio” directory, there are directories named with time. Choose the audio file and

press “OK” to play the audio. The audio format is WAV.

7. Settings

When the device is in preview mode, press “menu” button to show the “Setting” menu. Press

“UP” or “Down” to scroll up or down in the menu. Press “OK” to set the configuration. Press

“Return” to return to the upper level menu.

•The Rec resolution is for recording. The default setting is 1080P(1920*1080).

•The default record FPS is 30 FPS. The higher of the FPS, the smoother of the video footage.

•Recording quality refers to the bit rate of recording, the higher of the bit rate value,

theoretically, the better image we can get from the video footage.

H.264/H.265

Super

High

Medium

Low

1080P

8/ 4M

5/ 3M

3/ 1.8M

1.2/ 1M

1296P

9/ 5M

6/ 3.5M

3/ 2.4M

2/ 1.5M

1440P

10/ 6M

7/ 4M

4/ 2.5M

2/ 1.5M

1512P

10/ 6M

7/ 4M

4/ 2.5M

2/ 1.5M

•The Rec EncType is for recording files compression, given H.264 and H.265 two options.

Theoretically, H.265 consumes 50% less storage space than H.264 under the same picture

quality.

•The Live resolution is for video streaming through 4G/3G or WiFi. The default resolution

is (1280*720), the higher value we set, the better image we can get from the live

streaming.

•The Live view FPS for video streaming through 4G/3G or WiFi. The higher of the FPS, the

smoother of the live video.

•The default value of live quality is “medium”. We can get a better live streaming base on

the higher live quality value.

H.264/H.265

Super

High

Medium

Low

720P

1.5/ 1.5M

0.8/ 0.5M

1080P

2.5/ 2M

1.8/

1.5M

0.8/ 0.5M

1296P

3.5/

3.5M

2.8/ 2.8M

2/ 1.8M

1.5/ 1M

Body Camera User’s Manual

1440P

4/ 4M

3/ 3M

2 2M

1.5/ 1M

1512P

4/ 4M

3/ 3M

2 2M

1.5/ 1M

•The Live EncType is for live streaming compression, include H.264 and H.265 two options.

Theoretically, H.265 consumes 50% less data transmission than H.264 under the same

picture quality.

•Picture size means the picture’s resolution when you snap; the picture’s resolution you

took when device record, which is base on the record resolution.

•When the Dewarp is ON, it means that the camera has distortion correction to make the

picture more realistic and accurate; when the Dewarp is OFF, the lens angle is bigger and

zoom in/zoom out is available with the setting.

•The default USB mode is “Auto”. User can choose from “Auto”, “Host” or “Device” mode.

•“Host” means that device is working on 4G/3G or WiFi mode; “Device” means camera is

communicating with PC; “Auto” means that camera can detect the USB connected, if the

USB cable connects with PC, camera will work on “device” mode, if the USB cable connects

with charger, camera will work on “Host” mode.

•The 3G/4G setting is used to turn On/Off 3G/4G module.

•The WiFi setting is to turn On/Off the WiFi and AP. The default AP password is 12345678.

WiFi list can show the list of WiFi searched by device, which makes camera connecting a

WiFi more easier.

•Device support an external camera connection with USB cable, when the setting change

to “ON”, device will restart and then detect the external camera connection, if an external

camera connected, device’s screen will switch to the external camera view.

•Camera support face recognition that is to detect human’s face, if a man’s face were similar

to a picture stored in the database, device would trigger an alarm and start recording.

We can create an “images” folder as the database in TF card, copy the pictures to the folder,

those pictures format should be “jpg” or ”bmp”, the picture’s size should smaller than 320x240

(24bit).

Table des matières

Autres manuels OVERWATCH Appareil photo numérique

OVERWATCH

OVERWATCH XE11 Manuel de la liste des pièces

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur