Overland Storage Snap server 410 Manuel utilisateur

Quick Start Guide

and User CD

Kurzanleitung und Benutzer-CD

Guía de iniciación rápida y CD del usuario

Guide de mise en route rapide et CD de l’utilisateur

Guida rapida all’uso e CD utente

Р у к о в о д с т в о п о б ы с т р о й у с т а н о в к е и

компакт-диск User CD

Snap Server™ 410

About This Guide

This guide shows you how to install your Snap Server 410 in a rack and connect the server to your network. The

instructions consist of 5 steps:

Step 1: Verify the contents of your shipping package.•

Step 2: Install the server in the rack.•

Step 3: Connect power and network cables.•

Step 4: Power on the Snap Server.•

Step 5: Connect to the Snap Server for the ﬁrst time.•

Step 1: Verify the Contents of the Shipping Package

Before you begin installation, check to make sure you have all the hardware components required for your system.

Check the contents of your Ship Kit to make sure you have all the components described in the•

Hardware

Features

section.

Gather any optional components that you need to complete your system (described below in the•

Optional

Hardware Components

table).

Optional Hardware Components

Component Description

SCSI Card The Snap Server 410 can be upgraded to include a SCSI connection to attach a

backup tape device.

Tape Backup Device(s)

and Cables

You can connect a tape backup device either using a SCSI connection or a USB

connection.

•ToattachatapedeviceviaaSCSIconnectiontotheSnapServer,youneeda

68-pin VHDCI cable. For a list of compatible backup solutions, see the Support

section of the Snap Server Web site.

Note A SCSI card must ﬁrst be installed.

•ToattachatapedeviceviaaUSBconnection,youneedaUSB2.0cable

APC-brand UPS devices Snap Servers are designed to work with a USB- or network-based, APC-brand

UPS. Visit the APC Web site for a list of APC models to use with your Snap Server.

Hardware Features

1Power button 9 Secondary Ethernet port

2 Reset button 10 USB ports (4)

3System status lights 11 Service connector

4Disk drive status lights 12 Ethernet cables (2)

5Bezel release mechanisms 13 Power cables (1 US, 1 UK, 1 EU)

6 Hot-swappable disk drives (4) 14 Rackmount brackets (2)

7 Power supply module 15 Rack mount screws

8 Primary Ethernet port 16 Quick Start Guides and User CDs (3)

Note

The USB connectors on the back of the Snap Server cannot be used for administrative purposes. Snap Servers

are managed via the browser-based Administration tool.

Quick Start Guide

and User CD

Kurzanleitung und Benutzer-CD

Guía de iniciación rápida y CD del usuario

Guide de mise en route rapide et CD de l’utilisateur

Guida rapida all’uso e CD utente

Руководство по быстрой установке и

компакт�диск User CD

Quick Start Guide

and User CD

Kurzanleitung und Benutzer-CD

Guía de iniciación rápida y CD del usuario

Guide de mise en route rapide et CD de l’utilisateur

Guida rapida all’uso e CD utente

Руководство по быстрой установке и

компакт�диск User CD

Quick Start Guide

and User CD

Kurzanleitung und Benutzer-CD

Guía de iniciación rápida y CD del usuario

Guide de mise en route rapide et CD de l’utilisateur

Guida rapida all’uso e CD utente

Руководство по быстрой установке и

компакт�диск User CD

Step 2: Install the Server in a Rack

The Snap Server ships with two L-shaped rack mount brackets. You can attach them in one of two ways: (1) to the

front of the server for mounting to the front posts of a four-post rack; or, (2) to the middle or front of the server for

mounting to both posts of a Telco rack.

Caution The following procedure applies to standard EIA racks; other racks may not be able to support the

server using only the front posts. If you are using a non-EIA rack, Overland Storage recommends that you secure

the server using slide rails, available from Overland Storage or a Snap Server reseller.

1 Make sure you have the following items necessary for rack installation:

• Two (left and right) front rack mounting brackets

• Six rack ear screws to attach the brackets to the server

• Four rack mounting screws to

attach the brackets to the rack posts

• One Phillips screwdriver

2 If mounting the L-shaped brackets

to the front of the server (as shown

in the illustration), use the six

screws provided. (If mounting to the

middle of the server (not shown) for

installation into a Telco rack, only

four screws are used.)

3 Insert the server into the rack and

attach the server to the posts using the remaining four screws. You may need a second person to support the

server while tightening the mounting screws.

Note For slide rail installation instructions, see the documentation on the CD that comes with the slide rail

installation hardware kit.

Step 3: Connect Power and Network Cables

The server has Dual-Gigabit Ethernet ports that can connect to 10BaseT, 100BaseTx, or 1000BaseT networks. A

dual-port conﬁguration offers added advantages, such as load balancing and failover. You may connect one or

both of the ports.

If you connect only one port, you must use the primary port on the back of the server, as shown in the• Hardware Features illustration.

To take advantage of network bonding (load balancing or failover), both ports must be physically connected• to the network; and (a) for load balancing, connected to the same switch on the same subnet; or (b) for

failover, connected to different switches on the same subnet (in case one switch fails).

Caution The speed/duplex setting on Snap Servers defaults to autonegotiate. The networking switch or hub

to which the server is connected must also be conﬁgured to autonegotiate; otherwise, network throughput or

connectivity to the server may be seriously impacted.

Cabling the Server to the Network

Use the provided Ethernet cables to connect the server to the network. When you connect the network cables to

active ports, the network lights on the bezel (LAN 1 and LAN 2) are green.

Connecting the Power Cord

As a data integrity measure,

Overland Storage strongly

recommends you connect

the server to a UPS. Use the

provided power cord to plug the

module into the UPS or properly

grounded electrical outlet.

Note Snap Servers are designed

to work with APC-brand, USB- or network-based UPS devices to automatically shut down cleanly in the event of

an extended power failure. You must conﬁgure the APC unit both in the Snap Server’s Administration Tool and in

the APC user interface.

Step 4: Power on the Snap Server

To turn on the server, press the power button on the front of

the server. The server takes a few minutes to initialize.

The status LED will blink once per second when the server is

powered on.

Power

Step 5: Connect to the Snap Server for the First Time

Snap Servers are preset to acquire an IP address from a DHCP server. If no DHCP server is found on the network,

the Snap Server defaults to an IP address of 10.10.10.10, and you may not be able to see the server on your

network. You can discover a Snap Server using either the default server name or the Snap Server Manager (SSM)

utility. Use the server name method if you are installing a Snap Server on a network with a DHCP server. Use SSM

if your network does not have a DHCP server or if your network does not have name resolution services.

To Connect to a Snap Server Using the Server Name

This procedure requires that name resolution services (via WINS or an equivalent service) be operational.

1 Find the server name. The default server name is SNAPnnnnnn, where nnnnnn is the server number.

For example, the name of a Snap Server with a server number of 610019 is SNAP610019. The server number

is a unique, numerics-only string that appears on a label afﬁxed to the top of the server in the left front corner.

2 In a Web browser, enter the following URL:

http://SNAPnnnnnn (where SNAPnnnnnn is the server name)

3 Press Enter. The Web View screen opens.

4 Log into the Administration Tool and complete the Initial Setup Wizard.

Click the Administration link. In the login dialog box, enter admin as the user name and admin as the

password, then click OK.Complete the setup procedure using the Initial Setup Wizard.

To Connect to a Snap Server Using Snap Server Manager

Snap Server Manager (SSM) is a Java-based, multiserver administrative application that runs on all major

client platforms. Use SSM to discover, conﬁgure, and monitor all local and remote GuardianOS Snap Servers.

You can download and install SSM using the Install_SnapServerTools.html ﬁle on your Snap Server User CD. Be

sure to install SSM on a computer residing on the same network segment as your Snap Server(s).

1 Launch SSM.

SSM discovers all Snap Servers on its local network segment and displays their server names, IP addresses,

and other status information in the main console. If you do not have a DHCP server, there might be a delay

before the server appears on the network.

Note: To distinguish multiple Snap Servers, you may

need to ﬁnd their default server names as explained

in the previous procedure.

2 If using a DHCP server, proceed to Step 3.

Otherwise, assign an IP address to the server.

In SSM, right-click the server name and select Set

IP Address. Enter an IP address and a subnet mask,

then click OK.

3 Launch a server’s Administration Tool.

In SSM, right-click a server name and select Launch

Web Administration, as shown in the illustration.

4 Log into the Administration Tool and complete the Initial Setup Wizard.

Click the administration link. In the login dialog box, enter admin as the user name and admin as the

password, then click OK. Complete the setup procedure using the Initial Setup Wizard.

70990878-003 Rev B

User CD

www.snapserver.com 888-288-4206

All other product names or company names are the property of their

respective owners.

vorbehalten. Alle anderen Produktnamen und Firmennamen sind Eigentum

der jeweiligen Unternehmen.

en el ámbito internacional. Todos los otros nombres de productos o de

compañías son propiedad de susrespectivos priopietarios.

monde entier. Tous les autres noms de produit ou de société appartiennent

à leurs détenteurs respectifs.

paesi del mondo. Tutti i nomi di prodotti e società sono di proprietà dei

rispettivi proprietari.

Прочие названия изделий и компаний являются собственностью

соответствующих владельцев.

To obtain service or technical support for

your Snap Server, please visit our Web site at

http://www.snapserver.com, or call 1-888-343-SNAP. For immediate

response to a service inquiry, you can submit a question to our technical support

department using our Expert Knowledge Base System

http://www.snapserver.com/kb

Technischen Service

Sie finden den technischen Service oder Kundendienst für Ihren Snap Server auf unserer Website. Wenn Kunden

sofortige Antworten auf eine Serviceanfrage wünschen, können sie mit Hilfe unseres Expert Knowledge Base System

http://www.snapserver.com/kb

Obtención de servicio de asistencia

Para obtener servicio o asistencia técnica para su Snap Server, visite nuestro sitio Web. Para obtener respuesta inmediata a su solicitud de

asistencia, envíelas en la forma de preguntas a nuestro Sistema experto de base de conocimiento en

http://www.snapserver.com/kb

Obtention d‘un entretien

Pour un entretien ou une assistance technique concernant votre Snap Server, vérifiez notre site web. Pour obtenir une réponse immédiate à

une demande de service, vous pouvez envoyer une question à notre service d‘assistance technique en utilisant notre système de base de

connaissances experte

http://www.snapserver.com/kb

Richiesta di assistenza tecnica

Per informazioni su come richiedere assistenza o supporto tecnici sulle unità Snap Server, visiti il nostro website. Per assistenza

immediata su un problema, è possibile inviare una richiesta al reparto di assistenza tecnica tramite il sistema Expert

Knowledge Base, disponibile all’indirizzo

http://www.snapserver.com/kb

Сервисное обслуживание

Сведения о сервисном обслуживании серверов Snap Server посетите наше веб-узле.

Для быстрого получения ответа на технические вопросы от службы поддержки

их можно размещать в базе знаний Expert Knowledge Base System

по адресу

http://

www.snapserver.com/kb

Table des matières

Autres manuels Overland Storage Serveur

Overland Storage

Overland Storage SnapServer XSR 120 Manuel utilisateur

Overland Storage

Overland Storage SnapServer 510 Manuel utilisateur

Overland Storage

Overland Storage SnapServer DX1 Manuel utilisateur

Overland Storage

Overland Storage SnapServer 210 Manuel utilisateur

Overland Storage

Overland Storage SnapServer 2U Appliance Mode d’emploi

Overland Storage

Overland Storage ARCvault Series Manuel utilisateur

Overland Storage

Overland Storage Snap Server 18000 Manuel utilisateur

Overland Storage

Overland Storage SnapServer Expansion E2000 Manuel utilisateur

Overland Storage

Overland Storage SnapServer DX2 Mode d’emploi

Overland Storage

Overland Storage SnapServer N2000 Manuel utilisateur

Overland Storage

Overland Storage SnapServerXSR 40 Manuel utilisateur

Overland Storage

Overland Storage Snapshot SnapSAN Manuel utilisateur

Overland Storage

Overland Storage SnapServer DX1 Manuel utilisateur

Overland Storage

Overland Storage SnapSAN S1000 Manuel utilisateur

Overland Storage

Overland Storage SnapServer Manuel de service

Overland Storage

Overland Storage SnapServer XSR 120 Manuel utilisateur

Overland Storage

Overland Storage Snap Server 14000 Manuel utilisateur

Overland Storage

Overland Storage SnapSAN VSS Manuel utilisateur

Overland Storage

Overland Storage SnapServer 110 Manuel utilisateur

Overland Storage

Overland Storage ARCvault Series Manuel utilisateur

Overland Storage

Overland Storage SnapServer SAN S2000 Manuel utilisateur

Overland Storage

Overland Storage Snap Server 18000 Mode d’emploi

Overland Storage

Overland Storage Snap Server 12000 Manuel utilisateur

Overland Storage

Overland Storage SnapServerXSR 40 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Overland Storage snap server 410 Manuel utilisateur

Manuels Serveur populaires d'autres marques