Ovation OV9185 Manuel utilisateur
Instruction Manual
Blender
OV9185
PARTS
A. Assembled Jar D. Inner Lid G. Ring / Seal
B. Main Body E. Jar Lid H. Blades
C. Speed Control Knob F. Jar I. Jar Base
IMPORTANT SAFETY REMINDERS
When using electrical appliance, basic safety precaution should always be
followed including the following:
1. Read all instructions before using.
2. To protect against risk of electrical shock, do not put the unit in water or
other liquids.
3. Unplug from outlet when not in use, before putting on or taking off parts,
and before cleaning.
4. Avoid contact with moving parts.
5. To reduce the risk of electric shock, do not modify the plug in any way.
6. Do not operate any appliance with a damaged cord or plug, or after the
appliance malfunctions or is dropped or damaged in any manner. Return
appliance to the nearest authorized service center.
7. Do not use outdoors.
8. Do not let cord hang over edge of a table or counter.
9. Keep hands and utensils out of container while blending to reduce the risk
of injury or damage to the blender. A scraper may be used only when the
blender is not running.
10. Blades are sharp. Handle with extreme care.
11. To reduce the risk of injury, never place cutter-assembly blades on base
without the jug being properly attached.
12. Be certain cover is securely locked in place before operating appliance.
13. Always operate blender with cover in place.
14. Only use the appliance for its intended purpose.
15. The use of attachments or accessories, which are not included with the
product, is not recommended as it may cause a hazard or injuries.
16. This product is intended for domestic / household use only.
17. Note that the maximum operating time for the blender is 3 minutes.
Extra note to the following:
1. This appliance is not intended for long time operation.
2. This appliance must not operate when there's nothing in the jar.
3. WARNING: DO NOT USE THE BLENDER FOR HOT LIQUIDS / FOOD.
4. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
5. The appliance should be repaired by qualified professionals.
6. Always disconnect and switch off the appliance when not in use or before
assembling, disassembling or cleaning. Extra care should be taken when
handling the blades during cleaning.
SAVE THESE INSTRUCTIONS
Before first use
All parts of the blender are to be thoroughly cleaned before using for the
first time.
Take out the required length of cable from the cable tidy on the base of the
blender and connect the device to the mains supply.
USING YOUR APPLIANCE
Assembly of the glass jar
1. Put the rubber ring on the inner edge of the
blades.
2. Put the blades with ring into the jar base.
3. Mount the glass jar onto the jar base and turn
clockwise until it’s fixed.
4. To insert the glass jar onto the main body,
make sure that the blender is switched off
(Switch in the '0' setting). Place the jar on the
base and press down until securely engaged.
5. After putting your ingredients in the jar, fix the
lid onto the jar by pressing down.
6. Insert the inner lid into the opening of the jar
lid and turn counter-clockwise until it’s locked.
7. Switch on to desired setting.
Settings for your blender
Speed setting Use
1for light usage with liquids
2for more solid consistency - for mixing liquids and solid food
M for ice crushing and short, powerful impulse movements
* The switch does not permanently engage in the 'M' setting. You have to
hold the switch to the 'M' setting or turn it repeatedly to the 'M' setting.
Reminders:
•After using the blender, always return the switch to the '0' setting and
pull out the mains plug.
•To remove the glass jar, just lift it up. You do not have to rotate the glass
jar to remove it.
Useful tips
To achieve the best results when pureeing solid ingredients, place small
portions into the glass jar one by one instead of placing a large quantity all
at once.
If you are processing solid ingredients, cut them into small pieces (2-3cm)
first.
When mixing solid ingredients, start off first with a small amount of liquid.
Gradually add more and more liquid through the opening in the lid.
Always place your hand on top of the blender when you are using the
device.
Be careful when processing hot liquids.
For stirring solid or very thick liquid ingredients, we recommend that you
use the blender in impulse mode to prevent the blades from becoming
stuck.
CLEANING
•Never immerse the main body in water. Simply wipe away dirt with a
moist cloth.
•To clean the glass jar, empty it and fill it with water. Place it on the main
body and turn the switch on several times to the 'M' setting.
•Empty the glass jar and rinse until clean.
•Ensure that the glass jar is completely empty before you unscrew the
ring.
•Be careful when handling the blades.
•All removable parts are suitable for the dishwasher.
Table des matières
Autres manuels Ovation Mixer
