otometrics Bio-logic AuDX Manuel utilisateur
www.otometrics.com
Bio-logic®AuDX®
OAE and audiometry screening
Quick start guide
Doc. No.7-26-1384-EN/00
Part No.7-26-13804-EN
Bio-logic®
Quick Guide:
Bio-logic®AuDX®OAE and audiometry screening
Otometrics - Next generation Bio-logic products
2
Bio-logic®
Turning On/Off, and charging the device
Start menu
On/off button
on right side
Current time
Battery status
Select patient
Additional
information about
options for current
screen
Turn off device
Customize settings
Power supply
connector
Connect the headphones to the blue connector.
Select the Audiometry: Screening button from the start menu.
Select the ear on which you want to start the test.
Testing: Audiometry
Quick Guide:
Bio-logic®AuDX®OAE and audiometry screening
Otometrics - Next generation Bio-logic products
3
Bio-logic®
As you present the
stimulus, the current
level will be displayed
on the corresponding
(yellow) square. Once
the hearing status for
a frequency has been
identified, move on
to the next frequency.
Once all frequencies have been tested for one
ear, you can test the other ear.
Tapping twice on a
square will display NR
(no response).
Tap three times to get
back to a blank square.
Stimulus on indicator
Select the ear to test
Select the stimulus
levels
Press to present the
stimulus
Additional information
about options for current
screen
Stop test
Select the frequency
Audiometry test screen
Select the type of stimulus:
pure tone
pulsed tone
or warble
Quick Guide:
Bio-logic®AuDX®OAE and audiometry screening
Otometrics - Next generation Bio-logic products
4
Bio-logic®
Connect the probe to the red connector.
Select either the Screening or the
Standard button from the start menu.
Select the appropriate ear tip size and place
it on the probe tip. Insert the probe in the ear
making sure that the ear tip fits tightly into the
ear canal.
Select the test ear by pressing either the Right
or Left button. Select cartoon mode to show
balloons when the test is finished.
When the test is finished, press the Stop
button. You can add the patient’s personal
data, and save on the device, print to a
label (a label printer is required) or print to
a pdf file or full page report on PC.
Distortion Product Otoacustic Emissions (DPOAE) Screening
Quick Guide:
Bio-logic®AuDX®OAE and audiometry screening
Otometrics - Next generation Bio-logic products
5
Bio-logic®
If the required criteria
were met, the result will
be PASS. If not,
it will be REFER.
Probe fit override for
patients with PE tubes
or tympanic membrane
perforation
Progress for each
tested frequency
Overall test progress
Noise floor level
Print results to a label
or to a pdf file or full
page report on PC.
Switch to results of the
other ear after both ears
have been tested
Note: These circles indicate that
other screens are available to
view. Swipe your finger right or
left to get other views
Re-test failed
frequencies
Test other ear
DPOAE test results
Results view (Simple)
Please note that the initial result screen depends on the module settings in "DPOAE Preferences"
A calibration will be performed prior to measurement. A green light indicates successful calibration
(see below left). After successful ear probe calibration, the test will start automatically.
Quick Guide:
Bio-logic®AuDX®OAE and audiometry screening
Otometrics - Next generation Bio-logic products
6
Bio-logic®
Red or blue bars indicate
response, grey bars indicate noise
Outcome for each test sorted by
f2 and L2
Numeric values shown in table
format
Detailed results view
Quick Guide:
Bio-logic®AuDX®OAE and audiometry screening
Otometrics - Next generation Bio-logic products
7
Bio-logic®
Quick Guide Information
Release date: 2017-01-11
Revision: 02
Valid from: Firmware Rev. 2.1, Mira PC Software Rev. 1.6.4
Applies to: Model: SOH100098, web description SOH01
All mentioned items, products, brands and trademarks are registered or owned by the mentioned companies.
All information, illustrations, and specifications provided within this manual are based on the latest product
information available at the time of publication. PATH medical reserves the right to make changes at any time
without notice.
Please note that not all products displayed on our webpage or advertising materials are available in all
territories.
Please contact your local distributor or PATH medical for further information.
The latest revision of the Quick Start Guide is available online at www.pathme.de/download.
Errors and omissions excepted.
Copyright Notice
No part of this manual may be reproduced, translated, stored, or transmitted, in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent
of PATH medical GmbH.
Copyright © 2016 PATH medical GmbH
PATH medical GmbH
Landsberger Straße 65
82110 Germering
Germany
Tel: +49 89 800 76 502
Fax: +49 89 800 76 503
Internet: www.pathme.de
Table des matières
Autres manuels otometrics Instrument de mesure
otometrics
otometrics Madsen ZODIAC 901 Manuel utilisateur
otometrics
otometrics Aurical Hit Manuel utilisateur
otometrics
otometrics Bio-logic NavPRO ONE Manuel utilisateur
otometrics
otometrics MADSEN Capella Manuel utilisateur
otometrics
otometrics Madsen Xeta Manuel utilisateur
otometrics
otometrics Madsen Midimate 602 Manuel utilisateur
otometrics
otometrics AURICAL Aud Manuel utilisateur
otometrics
otometrics Madsen AccuScreen PRO Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur