Oticon FittingLINK 3.0 Manuel utilisateur

Change program

Pair your hearing aids with the TV Adapter

Before using the TV adapter, it must be paired with your hearing aids.

Pairing is only required once and takes around 20-60 seconds.

1. Make sure the TV adapter is on (plugged in).

2. Open and close the battery door on (both of) your hearing aid(s).

3. Place both hearing aids close to, or on top of, the TV Adapter.

4. Pairing is completed when the Power Indicator and TV Indicator

lights turn steady blue for about 30 seconds.

5. Your hearing aids are now able to receive sound streaming

from the TV adapter.

Alternatively, you can also start

TV sound and adjust volume with

the optional hearing aid Remote

Control 3.0 accessory.

Start TV sound

using your hearing aids

To listen to TV, simply make long

presses on the button on your

hearing aids to cycle through the

programs until you reach the TV

listening program. The program

cycle will depend on how many

programs have already been set

up in your hearing aids by your

hearing care professional.

To stop the sound from the TV,

simply cycle back to the desired

program in your hearing aids.

Note: The optional Oticon ON App also lets you access

the TV listening program and adjust volume control.

P2 TVP1

Change program

A short press on the RIGHT

hearing aid button increases

the volume.

A short press on the LEFT

hearing aid button decreases

the volume.

P2 TVP1

Adjust the volume by pressing

up or down briefly. Repeat

the brief press for further

adjustments.

Connect the TV Adapter 3.0 box to your television

See the Instructions for Use booklet that comes with the TV adapter.

Four methods are available to support a wide variety of connection needs.

Using TV Adapter 3.0

You can change hearing aid programs and volume with the Remote Control.

When the status light on the remote control lights

up steady green for 10 seconds, the devices have

been paired successfully.

Operating Range

You can operate your hearing aids with the remote

control from a distance of up to 1.8 meters.

(approximately 6 feet)

Press “+” to

increase volume

(louder sound)

Press to change

program

Press “–” to

decrease volume

(softer sound)

Mute

Use the mute function if you need to silence the hearing aids while wearing them.

Press and hold the volume down button for approximately 2 seconds until the status

light turns o, to mute the hearing aids.

Unmute

Briey press any button on the remote control to unmute your hearing aids.

Press for

approximately

2 seconds

www.oticon.com

Place both of your hearing aids

within range of the remote control.

(within 20 cm, approximately 7 inches)

11370 15555-0864/06.16

Open and close the battery drawer on both of your hearing aids.

Press any button on the remote control and it will automatically pair with

the hearing aids in range.

Before the remote control can be used with your hearing aid(s),

they need to be paired with your hearing aid(s).

Check that the remote control has working batteries by pressing any button.

(The status light at the top should light up if the batteries are good.)

Using Remote Control 3.0

Autres manuels pour FittingLINK 3.0

Autres manuels oticon Prothèse auditive

oticon

oticon Amigo eZync Manuel utilisateur

oticon

oticon minirite Manuel utilisateur

oticon

oticon OPN Manuel utilisateur

oticon

oticon streamer Manuel utilisateur

oticon

oticon Vigo Connect Instructions de montage

oticon

oticon connectline microphone Manuel utilisateur

oticon

oticon Aurora miniRITE 312 T Rc Manuel utilisateur

oticon

oticon Oticon Xceed Series Manuel utilisateur

oticon

oticon miniRITE Geno Series Manuel utilisateur

oticon

oticon BTE 13 with Corda Manuel utilisateur

oticon

oticon Amigo T5 Manuel utilisateur

oticon

oticon Real miniBTE R Manuel utilisateur

oticon

oticon Amigo T10 Instructions de montage

oticon

oticon Agil Manuel utilisateur

oticon

oticon miniBTE Alta Manuel utilisateur

oticon

oticon ConnectClip Manuel utilisateur

oticon

oticon Engage miniRITE Manuel utilisateur

oticon

oticon Intiga i Manuel utilisateur

oticon

oticon OPN MINIRITE Manuel utilisateur

oticon

oticon More Series Manuel utilisateur

oticon

oticon miniRITE Nera2 Manuel utilisateur

oticon

oticon Agil Manuel utilisateur

oticon

oticon CIC P Manuel utilisateur

oticon

oticon Alta 2 Manuel utilisateur

Manuels Prothèse auditive populaires d'autres marques

Sonic

Sonic Bliss miniBTE Manuel utilisateur

Lexie

Lexie B1 Manuel de la liste des pièces

Widex

Widex FM+DEX Manuel utilisateur

Siemens

Siemens Triano Manuel utilisateur

Camplicomms

Camplicomms HC-200 Manuel utilisateur

Widex

Widex SUPER 220 S2-VSD Manuel utilisateur

Phonak

Phonak Q90 Manuel utilisateur

Williams Sound

Williams Sound SoundPlus WIR 237 Mode d’emploi

Oticon Medical

Oticon Medical Ponto SoundConnector Manuel utilisateur

Siemens

Siemens Life micon Manuel utilisateur

Starkey

Starkey Destiny Manuel utilisateur

Audicus

Audicus The Icon Manuel utilisateur

Advanced Bionics

Advanced Bionics Slim HP Standard Manuel utilisateur

Widex

Widex DREAM440 THE DREAM SERIES Manuel utilisateur

Phonak

Phonak myPilot Manuel utilisateur

NIKEN

NIKEN NK-401 Manuel utilisateur

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Manuel utilisateur

Sonetik

Sonetik GOHEAR Manuel utilisateur

oticon FittingLINK 3.0 Manuel utilisateur

Manuels Prothèse auditive populaires d'autres marques