Operating Instructions for Mobile Reverse Osmosis System OSMOBIL PRO X
VF Reinigungstechnik
Benjamin Volk & Tobias Becker GbR
Blankenfohrweg 11
32139 Spenge
T 05225 87198
15
info@vf-reinigungstechnik.de
www.gebaeudereinigung-shop.de
www.gardiner-teleskopstangen.de
www.vf-reinigungstechnik.de
Sparkasse Bielefeld
IBAN DE60 4805 0161 0003 4120 53
BIC SPBIDE3BXXX
Steuer-Nr. 324/5816/0846
2 Production of ultra pure H2O
2.1 Setting up the work site
First of all, you should organise a city water and electricity supply of sucient capacity at
the respective work site. When doing this, make sure that in later operation vehicles, doors
or other conditions do not cause hoses to the unit or away from the unit to be kinked or
blocked. This could damage the unit.
Caution: Also, it must be ensured that live parts such as cables or cable reels, sockets, etc.
are strictly separate from water-carrying parts (hose, pump, unit, etc.). Despite the built-in
personal protection plug, we ask you to observe this for your own safety. In addition, the
appliance must not be placed under water or under permanently owing water.
Also, always choose a location for the unit that is insensitive to leaking water or has a oor
drain. It is best to place the appliance outdoors or on a tiled oor with a drain. Alterna-
tively, the unit can be placed in a suciently large tub. If, due to improper use, hoses burst,
the pressure relief valve on the unit „opens“ or water escapes in any other way, the possi-
ble consequential damage can be prevented in this way.
2.2 The right water source
Attention: When choosing the water source, special attention must be paid to the origin
of the water to be used for production. In its normal conguration, the OSMOBIL PRO X
is only intended for the use of approved city water in accordance with the German Drin-
king Water Ordinance! The use of other water can cause considerable damage to your
OSMOBIL PRO X and primarily to the membrane bodies - and that after only a few litres
of production! Therefore, make sure that you only use city water of drinking quality, which
complies with the German Drinking Water Ordinance!
If you have no knowledge of the water sources at the respective location, please be sure
to talk to people who have knowledge of the local water supply (e.g. your clients, building
technicians, etc.) before starting work. If, for example, you use water from a well, a cistern,
a rain barrel or something else, your unit may be damaged after just a few minutes! A sud-
den failure of the water supply (e.g. in agriculture due to animal feeding) can also cause
damage to your unit. If there is no drinking water supply on the respective construction
site or if you have to work frequently under such conditions, please contact your specialist
dealer. Possibly, the respective problem can be solved by additional pre-lters.
2.3 Hoses and couplings
The permanently installed concentrate/waste water line is connected to the city water
inlet when the unit is delivered and at rest. In this way, the unit is also directly airtight and
no water can escape. First disconnect the waste water hose from the city water inlet if
you want to produce pure water. Next, connect the supply water hose to the „city water“
connection on the back of the unit. For this purpose, please use at least hoses with a 3/4“
diameter (or larger). Accordingly, you must rst disconnect the concentrate hose from the
city water inlet in order to be able to work.
In addition, the waste water (concentrate) from the unit must be discharged via the per-
