ORBOT LiO Manuel utilisateur

OPERATING MANUAL

2023

Warranty ....................................................................................................................

How to Use This Manual .......................................................................................

Safety - Important Instructions ................................................................

Battery .......................................................................................................................

Technical Details ....................................................................................................

Operation ...........................................................................................................

–Unpacking

–Solution Tank

–Pads & Brushes

–Power Switch

–Battery

–Adjustable Power Knob

Handling ....................................................................................................................

–Lifting

–Storage

–Pad Driver

Pads .....................................................................................................................

–SuperZorb Pad

–AgiClean Pad

–UltraLift Pad

–AkwaStrip Pad

–StoneFlash Pad

Brushes .....................................................................................................................

–SpeedFlex Tile & Grout Brush

–SpeedFlex Concrete Brush

–SpeedFlex Micro Scrub Brush

Maintenance ...........................................................................................................

–Cleaning the Machine

–Checking the Machine

–LiO Clans Hard to Reach Spaces

Part Diagrams and Part Lists ....................................................................

Complete Assembly ............................................................................................

Wiring Diagram .....................................................................................................

TABLE OF CONTENTS

5 - 6

9 - 10

12-13

16-22

All ORBOT equipment has been carefully tested and inspected at our USA factory.

ORBOT LiO machines are guaranteed for one year from the date of original purchase

against defects or workmanship made during manufacture. Within the guarantee

period we undertake at our discretion, to repair or replace any part found to be

defective, free of charge to the purchaser with subject to the following conditions:

Claims made under the terms of the guarantee must be supported by the original

invoice issued at the time of sale along with the machine serial number.

For claims under this guarantee contact the supplier from whom you’ve purchased the

product who will arrange the appropriate action. Do not initially return the product as

this could lead to transit damage.

Neither ORBOT nor its distributors will be held responsible for any incidental or

consequential loss.

This guarantee does not cover:

• Periodic maintenance, repair or replacement of parts due to normal wear and tear.

• Damagecausedbyaccident,misuseorneglect,reorthettingofotherthan

genuine ORBOT parts.

• DefectsinotherthangenuineORBOTparts,repairs,modicationsoradjustments

made by other than an ORBOT service engineer or authorized service dealer.

• Costs and risks of transport relating directly or indirectly to the guarantee of this

product.

• Consumable items such as brushes, drivers, Velcro discs, gliders, pads and so forth.

ORBOT has a policy of continual product development and we reserve the right to

alterspecicationswithoutpriornotice.

WARRANTY

MACHINE DATA

Model:

Serial:

Date of Purchase:

Dealer:

Address:

Phone Number:

Sales Representative:

This manual contains the following

sections:

• How to Use This Manual

• Safety

• Operations

• Maintenance

• Parts List

The HOW TO USE THIS MANUAL section

willtellyouhowtondimportant

information for ordering correct repair

parts.

Parts may be ordered from authorized

dealers. When placing an order for parts,

the machine model and machine serial

number are important. Refer to the

MACHINE DATAboxwhichislledout

during the installation of your machine.

The MACHINE DATA box is located on

the inside of the front cover of this

manual.

The model and serial number of your

machine is located on the electrical box

behind the handle, from the operators

perspective.

The SAFETY section contains important

information regarding hazardous or

unsafe practices of the machine. Levels

ofhazardsareidentiedthatcouldresult

in product damage, personal injury, or

severe injury resulting in death.

The OPERATIONS section is to familiarize

the operator with the operation and

function of the machine.

The MAINTENANCE section contains

preventive maintenance to keep the

machine and its components in good

working condition. They are listed in this

general order:

• Storage

• Maintenance

• Troubleshooting

The PARTS LIST section contains

assembled parts illustrations and

corresponding parts list. The parts

lists include a number of columns of

information:

• REF – column refers to the reference

number on the parts illustration.

• PART NO. – column lists the part

number for the part.

• PRV NO. – reference number.

• QTY – column lists the quantity of the

part used in that area of the machine.

• DESCRIPTION – column is a brief

description of the part.

• SERIAL NO. FROM – If this column has

an (*) and a Reference number, see

the SERIAL NUMBERS page in the

back of your manual. If column has

two asterisk (**), call manufacturer

for serial number. The serial number

indicatestherstmachinethepart

number is applicable to. The main

illustration shows the most current

design of the machine. When a boxed

illustration is shown, it displays the

older design.

• NOTES – column for information not

noted by the other columns.

NOTE: If a service or option kit is installed

on your machine, be sure to keep the KIT

INSTRUCTIONS which came with the kit.

It contains replacement parts numbers

needed for ordering future parts.

NOTE: The manual part number is located

on the lower left corner of the front

cover.

HOW TO USE THIS MANUAL

IMPORTANT SAFETY INSTRUCTIONS

When using this machine, basic precautions must always be followed,

including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE

Toreducetheriskofre,electricshock,orinjury:

• Use only indoors. Do not use outdoors or expose to rain.

• Use only as described in this manual. Use only manufacturers recommended

components and attachments.

• If the machine is not working properly, has been dropped, damaged, left outdoors, or

dropped into water, return it to an authorized service center.

• Do not operate the machine with any openings blocked. Keep openings free of debris

thatmayreduceairow.

• Machinecancausearewhenoperatingnearammablevaporsormaterials.Donot

operatethismachinenearammableuids,dustorvapors.

• This machine is suitable for commercial use such as: in hotels, schools, hospitals,

factories,shops,andocesformorethannormalhousekeepingpurposes.

• Maintenanceandrepairsmustbedonebyqualiedpersonnel.

• During operation, use caution around other persons, especially children.

• The machine shall only be operated by instructed and authorized persons.

• When leaving unattended, unplug the machine.

• Do not handle the plug or machine with wet hands.

• Do not unplug machine by pulling on cord. To unplug, grasp the plug and not the

cord.

• Do not use with damaged cord or plug. Follow all instructions in this manual

concerning grounding the machine.

• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord

around sharp edges or corners.

• Do not pull/run machine over cord. Keep cord away from heated surfaces.

• Connect to a properly grounded outlet. See Grounding Instructions.

• If the supply cord is damaged it must be replaced by an authorized service agent.

• Unplug before cleaning or servicing.

• Operational hazard may occur when running the machine over the supply cord.

• Thisappliancehasbeendesignedforusewithpadsspeciedbythemanufacturer.

Thettingofotherpadsmayaectitssafety.

• This machine is for dry use only and shall not be used or stored outdoors in wet

conditions

• Moving Parts - To reduce the risk of injury, unplug before servicing.

READ AND SAVE THESE INSTRUCTIONS

SAFETY

The following symbols are used throughout this guide as indicated in their

descriptions:

HAZARD INTENSITY LEVEL

Therearethreelevelsofhazardintensityidentiedbysignalwords-

WARNING, CAUTION, and FOR SAFETY. The level of hazard intensity is determined by

thefollowingdenitions:

WARNING - Hazards or unsafe practices CAN result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or

product or property damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of

equipment.

Report machine damage or faulty operation immediately. Do not use the machine

if it is not in proper operating condition. The following is information that signals

some potentially dangerous conditions to the operator or the equipment. Read this

information carefully. Know when these conditions can exist. Locate all safety devices

on the machine. Please take the necessary steps to train the machine operating

personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

• Unless trained and authorized.

• Unless Operation Guide is read and understood.

• Inammableorexplosiveareas.

• In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing, jackets, shirts, or sleeves when

working on the machine. Use only manufacturer approved replacement parts.

SAFETY

BATTERY

QUICK INSTRUCTIONS FOR CORRECT USE

OF LI-ION BATTERIES

1. BEFORE USING A NEW MACHINE:

Fully recharge the battery 90 minutes.

The batteries (on machines & spare) are very low charged for safety reasons. Most

times with those low charged batteries, the machine will not start working unless

rstfullycharged(41,5V).

2. AFTER USE:

Alwaysrechargebattery(Leaveonchargeruntilgreenlightashes).

If left discharged, the self-discharge will continue at a dangerous level. The

machineselectronicboardwillturnoat32V.At29Vthebatterywillgointosleep

mode at 20V. Battery in this condition needs to be fully recharged (90 minutes).

The charger wakes up the battery to a minimum 20V.

3. IF MACHINE STOPS DUE TO LOW BATTERY:

Always remove battery and recharge (Leave battery on charger approximately 90

minutesuntilgreenlightisashing).

If the battery is left in the machine with the switch ON, the discharge will be very

fast due to the lights and electronic board.

4. STORAGE:

FULLY charged battery (41,5V) canstay(instock)at+50°Fto+68°F(+10°Cto

+20°C) for a maximum of 2 years.

DISCHARGED battery (32V) canstay(instock)at+50°Fto+68°F(+10°Cto+20°C)

for a maximum of 6 months. Always recharge batteries before use.

5. VOLTAGE

BETWEEN 16V-20V: Battery ONLY to be reactivated by Lindhaus.

UNDER 15V: battery permanently damaged & cannot be recharged.

These 5 important

points will prevent

almost any battery

damage

ITEM SPECIFICATIONS

Motor 36 V/330W - DC, 3000 RPM, 59 dB with protective cover

Dual Speed 3200RPM(Orbital),120RPM(Rotational)

Base Diameter 14”(35.5cm)

Wheel Diameter 8”(10.16cm)

Solution Tank Capacity 3/4 Gallon (2.84 L)

Pump 58 PSI (4 BAR)

Noise Level 59 dB

Height 47”(119cm)

Weight 48Lbs/21.7Kg(+6lbs/2.7kgw/tank&battery)

Battery (BMS) Lithium-ion 36V/40W/6Ah (Battery Management

System)

Run Time (one battery) Upto45Minutes(dependingonoortype/pad)

Charge Time 90 Minutes per battery

TECHNICAL DETAILS

Unit may be operated with one or two batteries for extended run-time.

OPERATION

Unpacking

Open shipping box (both sides). Remove

packaging material and roll machine out of

the box.

Solution Tank

Disconnectthequick-connecttting

located at the bottom of the solution tank.

Remove solution tank by pulling away from

the handle frame. Add water or cleaning

detergent of choice. Snap solution tank

onto frame.

Reconnectthequick-connecttting.

Ensure solution tank cap is securely

fastened to avoid leaks and spills.

Pads/Brushes

Choose an Orbot pad or brush of choice to

cleanorrestorethedesiredoor.

Place under the hook pad driver BEFORE

powering on machine.

Toremove,simplypeelo.

Power Switch

Push power switch located at the top of

the handle.

Battery

Insert one or two batteries into the battery

tray located inside the base housing cover.

Ensure to completely lock the battery into

position until you hear a click sound. To

remove the battery, release the battery

lever and pull out.

Adjustable Power Knob

Dial up for increased agitation on stains

or highly soiled areas. Dial down on lightly

soiled areas to extend battery run-time.

Always remove battery and immediately

charge to avoid damage.

OPERATION

Handle Position

Before powering ON the machine, lower

the handle into a comfortable position by

pulling out the pull-pin lever located on the

lower left side of the handle fork.

Operating Option

To increase operator comfort, the wheel

kitcanbelowereddownontotheoorby

releasing the pull-pin lever and choosing

the desired height.

Spray System

Toapplywaterordetergenttotheoor

surface, press the spray switch located on

the top right side of the handle.

Weight Kit

Optional weight kit may be added for

restoring tile & grout or heavily soiled

hardoors.

System Light Indicators

(Located on Top of Handle)

Blue lights:

• One Blue Light: Low Battery Level

• Two Blue Lights: Medium Battery Level

• Three Blue Lights: Full Battery Level

Red light:

• Machine is working over full load capacity.

Run times will lessen.

Green light:

• Machine is working under light load

capacity. Run times will increase.

Table des matières

Autres manuels ORBOT Équipement de nettoyage

ORBOT

ORBOT PACIFIC FLOORCARE MSB-19 ORB Manuel utilisateur

Manuels Équipement de nettoyage populaires d'autres marques

Skov

Skov Farm AirClean Manuel

Nilfisk-Advance

Nilfisk-Advance CA 240 Manuel utilisateur

unGer

unGer OmniClean Manuel utilisateur

CENTREGO

CENTREGO Toucan Eco Bio Carry Manuel utilisateur

BANDELIN

BANDELIN SONOREX TECHNIK RM 110 UH Manuel utilisateur

Sealey

Sealey VMA913 Manuel utilisateur

Aztec

Aztec 520-00 Manuel utilisateur

BÖWE

BÖWE P25 Manuel utilisateur

Tunap

Tunap MF 929 Instructions d'utilisation et d'installation

RIDGID

RIDGID K-45AF-7 Manuel utilisateur

Aircraft

Aircraft POWERGLIDE Manuel utilisateur

Suevia

Suevia 130.5011 EASYCLEANER Manuel utilisateur

Streamline

Streamline Filterplus MOBI SK Manuel utilisateur

Thermax

Thermax AF2 Manuel utilisateur

IPC

IPC CT15R Manuel utilisateur

i-MO

i-MO Öko 2000 Manuel utilisateur

unGer

unGer Hydro Power Ultra UNP01 Manuel utilisateur

Black & Decker

Black & Decker BHPC130 Manuel utilisateur