www.osily.co.uk
3. Press
mode button - the smaller number on the right of the circle
which indicated the day will flicker then press
key until you reach
your desired day. The list of days and the equivalent numbers are
listed on the LED icon descriptions.
4. Then press the
mode button. This should bring you to the
programme screen.
5. Press and hold the
mode button for 5 seconds or until 1 becomes
“00”. Press
or
keys to modify the P1 program. (Press
to
operate COMFORT MODE, press
button to operate ECONOMY MODE)
The program squares will flash.
6. After you have modified the program, press mode button to exit.
7. If you wish to modify more pre-set programs, use the
or
keys to select the program to be modified (P1-P7), then repeat
steps 5 & 6 above for each program being modified.
8. When modifying of pre-sets is completed, wait for 30 seconds and the
screen will return to the timing master interface. The modified pre-sets
will automatically be saved.
9. The modified pre-sets can now be programmed into the required days by
following the steps in “Setting the Clock and Programming” on page 12.
NB: The factory set timing program pre-sets can be restored by resetting back to defaults
by doing the following:
1. Press the power button to put the radiator into standby mode.
2. Press and hold the power button for 15 seconds to restore the device to default settings.
7. If you wish to modify more preset programs, use the + and -
keys to select the program to be modified (P1 - P7), then repeat
steps 5 & 6 above for each program being modified.
When modifying of presets is completed, wait for 30 seconds and the
screen will
The modified presets will automatically be saved.
9. The modified presets can now be programmed into the required days
by following the steps in “Setting the Clock and Programming” on page 11.
NB: The factory set timing program presets can be restored by resetting back to defaults by doing the following:
Press the power button to put the radiator into standby mode.1.
Press and hold the power button for 15 seconds to restore the device to default settings.2.
7. If you wish to modify more preset programs, use the + and -
keys to select the program to be modified (P1 - P7), then repeat
steps 5 & 6 above for each program being modified.
When modifying of presets is completed, wait for 30 seconds and the
screen will
The modified presets will automatically be saved.
9. The modified presets can now be programmed into the required days
by following the steps in “Setting the Clock and Programming” on page 11.
NB: The factory set timing program presets can be restored by resetting back to defaults by doing the following:
Press the power button to put the radiator into standby mode.1.
Press and hold the power button for 15 seconds to restore the device to default settings.2.
7. If you wish to modify more preset programs, use the + and -
keys to select the program to be modified (P1 - P7), then repeat
steps 5 & 6 above for each program being modified.
When modifying of presets is completed, wait for 30 seconds and the
screen will
The modified presets will automatically be saved.
9. The modified presets can now be programmed into the required days
by following the steps in “Setting the Clock and Programming” on page 11.
NB: The factory set timing program presets can be restored by resetting back to defaults by doing the following:
Press the power button to put the radiator into standby mode.1.
Press and hold the power button for 15 seconds to restore the device to default settings.2.
7. If you wish to modify more preset programs, use the + and -
keys to select the program to be modified (P1 - P7), then repeat
steps 5 & 6 above for each program being modified.
When modifying of presets is completed, wait for 30 seconds and the
screen will
The modified presets will automatically be saved.
9. The modified presets can now be programmed into the required days
by following the steps in “Setting the Clock and Programming” on page 11.
NB: The factory set timing program presets can be restored by resetting back to defaults by doing the following:
Press the power button to put the radiator into standby mode.1.
Press and hold the power button for 15 seconds to restore the device to default settings.2.
7. If you wish to modify more preset programs, use the + and -
keys to select the program to be modified (P1 - P7), then repeat
steps 5 & 6 above for each program being modified.
When modifying of presets is completed, wait for 30 seconds and the
screen will
The modified presets will automatically be saved.
9. The modified presets can now be programmed into the required days
by following the steps in “Setting the Clock and Programming” on page 11.
NB: The factory set timing program presets can be restored by resetting back to defaults by doing the following:
Press the power button to put the radiator into standby mode.1.
Press and hold the power button for 15 seconds to restore the device to default settings.2.
