9
3. INSTALLATION
We recommend using a trusted installer or electrician for installation of the product.
IMPORTANT: Prior to installation, please locate the metal tag located at the back of the product
and note the product reference and serial number.
WARNING: Do not install the product directly over an electrical outlet or junction box. Do
not install the product or use it outdoors. Do not install directly under a shelf. This product
is designed to be installed on an interior wall using the template, the installation kit and the
xings supplied. Do not install the product in such a way that it encounters the power cable.
The product must be mounted on the wall in the position
shown in the accompanying image using the brackets and
with the xings supplied.
Our products transfer heat through the natural air
convection. If the product is covered, this will disrupt the
airow and could cause overheating. It must be positioned
in accordance with the minimum distances shown in the
accompanying picture.
WARNING: The product has an IP24 degree of protection and can be used in bathrooms, but
not in the vicinity of bathtubs, taps, showers, water connections, toilets, swimming pools
or other masses of water. The product can only be installed in zone 3 of the accompanying
picture. The product must never be installed where it, the switches or the control panel are
within the reach of people in the water. Never use the product with wet hands. Do not place
any water containers (glasses, vases, etc.) on or near the product.
ZONA EXTERIOR ZONA EXTERIOR
2.25 m
0.6 m 0.6 m
0.6 m
