Origen ae S10V Manuel utilisateur
Origen
S14V /S16V user guideS10V /
Thank you for purchasing this Origen htpc enclosure. We recommend
that you read this user guide thoroughly before installation.
ae
Origen is not responsible for any damages due
to external causes, including but not limited to,
improper use, problems with electrical power,
accident, neglect, alteration, repair, improper
installation or improper testing.
SVUG.V1/11.07
Copyright © 2007 Technology
All rights reserved
ae
ae
Origen
S14V /S16V user guideS10V /
Origen has rapidly grown to be one of the worlds leading HTPC enclosure
manufacturers since its inception in 2000. We were one of the first companies
with the vision to produce high end htpc enclosures that harmonise with
mainstream audio visual equipment, allowing the pc to leave the office
and fit effortlessly into the living room environment.
We are driven by the passion to produce exceptional products
that push technical and aesthetic boundaries to new levels.
For more information on all of our products,
visit www.origenae.com
ae
S10V overview
Opening the case
Hard drive installation
Optical disk drive installation
Auxiliary access slot
IR Blaster installation
Multi-format card reader & I/O ports
PCB/cable reference diagram
Installing VFD/IR Software
4
7
9
9
11
11
12
13
14
S10V
S14V overview
S16V overview
Opening the case
ODD cage removal
Hard drive installation
Optical disk drive installation
Metal sticker fitting instructions
Optical drive bezel installation
Auxiliary access slot [S14V]
IR Blaster installation [S14V]
Micro ATX standoffs [S16V only]
Multi-format card reader & I/O ports
PCB/cable reference diagram
Installing VFD/IR Software
5
6
7
7
7
8
8
10
11
11
11
12
13
14
S14V /S16V
index
14
286 9
3510
11 12 13 414 15 16 17
20
Power button
Power LED ring
One piece aluminum chassis
VFD/IR acryl window
Top panel
Slot for optical disk drive (ODD)
ODD eject button
Soft-eject access panel
I/O ports/multi-format card reader
Door latch
2 x 60mm low dB exhaust fans
I/O ports/card reader PCB
ODD bracket
Philips IR controller* fixing point
Hard drive mount brackets
VF210 VFD/IR module
HD chassis mount
2 x 60mm low dB intake fans
Auxiliary access slot
Top panel fixing screw
Philips IR blaster* fixing point
PSU intake vent (when isolated)
*part of an optional IR kit (IR221)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
S10V overview
These are the main features and
controls of the S10V htpc enclosure.
18
19 21
12
20
7
22
4
14
276 8 9
3510
11 12 13 14 4 15 16 17 18
Power button
Power LED ring
One piece aluminum chassis
VFD/IR acryl window
Top panel
Optical disk drive (ODD) bezel
Soft-eject access panel
I/O ports/multi-format card reader
ODD eject button
Door latch
Intake vent
I/O ports/card reader PCB
ODD cage
4th HD mount bracket
Philips IR controller* fixing point
VF210 VFD/IR module
Primary hard drive cage
Side intake vent
92mm low dB fan
Auxiliary access slot
Top panel fixing screw
Philips IR blaster* fixing point
60mm low dB fan
*part of an optional IR kit (IR221)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
S14V overview
These are the main features and
controls of the S14V htpc enclosure.
19
2320 21 23 2122
5
11
14
276 8 9
3510
12 13 14 15 4 16 17 18 20
19
21 22 21
22
23
Power button
Power LED ring
One piece aluminum chassis
VFD/IR acryl window
Top panel
Optical disk drive (ODD) bezel
Soft-eject access panel
I/O ports/multi-format card reader
ODD eject button
Door latch
+
Fixing point for HM100 (see 23)
Intake vent
I/O ports/card reader PCB
ODD cage
4th HD mount bracket
Philips IR controller* fixing point
VF210 VFD/IR module
Primary hard drive cage
Side intake vent
92mm low dB fan
Top panel fixing screw
80mm low dB fan
+
HM100 hard drive mount
(allows a 5th HD to be installed)
+optional accessory
*part of an optional IR kit (IR221)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
S16V overview
These are the main features and
controls of the S16V htpc enclosure.
6
Opening the case
Remove the thumb screws
as indicated. Carefully raise
the p
and
anel as shown (about
30mm is enough) pull
out to remove. Reverse the
procedure to replace.
ODD cage removal [S14V/S16V]
Remove the top fixing screw completely.
4 fixing
screws circled.
it to slide
back and be lifted out over the screw
heads, ready for ODD installation.
Loosen (no need to remove) the
Keyhole shaped holes
on the base of the cage allow
Optical disc drive installation [S14V/S16V]
Unclip the existing plastic drive bezel from your
ODD. The disc tray should be ejected for this and
usually requires some upward force to the bezel.
Slide the optical disk drive through the front of
the cage. Before securing the drive screws,
check/adjust the ODD’s position in the chassis -
it should sit as close to the front I/O plate as
possible without the drive eject button becoming
depressed. Secure all fixing screws and double
check the eject button functions correctly.
1
2
ODD
cage
Optical
disk drive
Hard drive
mount
front I/O plate
DO NOT force upwards
as this could cause
damage to the top panel.
7
Optical disk drive (ODD) bezel installation [S14V/S16V]
The aluminum ODD bezel matches the finish of the case. The installation procedure requires
that the plastic drive bezel that comes fitted to your drive, be removed prior to installation.
Metal sticker fitting instructions [S14V/S16V]
Ensure the bezel
is free from dirt of grease. Peel and fold back the yellow backing sheet, revealing only the part you
wish to use. arefully position the icon as central as possible, then apply even pressure over the
entire area. Peel off the plastic film (and unused icons) to reveal you handy work!
The drive format icon should also be fitted to the bezel before installation. The metal sticker sheet
supplied has Blu-ray, HD-DVD or DVD icons, depending on the format being used.
C
Check that the drive has been aligned correctly and that the can eject and close freely.tray
Peel the back off the adhesive foam strip on the rear of the aluminium bezel. Fold a cardboard
spacer around each end of the bezel, holding your thumb against the flaps as shown. With the
tray closed, position inside the drive opening and press firmly against the front of the tray to
ensure good adhesion. Eject the tray to remove the spacers (a gentle tug may be required).
TOP
TOP
foam
tape
8
IDE
adapter
12.7mm slot
load ODD
ODD
bracket
Optical disc drive installation [S10V]
. Keyhole shaped holes
allow to slide up and be lifted out over the screw
heads. Install the ODD as shown.
Loosen (no need to remove) the 4 fixing screws
the ODD bracket
The IDE adapter will allow for the
standard 40 pin connecter. Before securing the drive screws, check
the ODD’s position in the chassis - it should sit as close to the front I/O
plate as possible without the drive eject button becoming depressed.
Secure all fixing screws and check the eject button functions correctly.
mount
screw
mount
bracket
Hard Drive installation [S10V]
The S10V supports 2 hard drives. Each HD requires four anti-vibration screws,
. A single mount bracket
is push fitted over the mount screws on the one side only. The drive may then be positioned
between the chassis mounts as shown, and gently pushed into place, taking care not to
damage the rubber on the mount screws. One thumb screw will secure the hard drive in place.
secured
as shown, which will isolate the drive from the chassis once installed
front I/O plate
9
Hard Drive installation [S14V/S16V]
The S14V and S16V support up to
4 hard drives*, three in the primary
HD cage and one above the ODD.
. The mount
bracket is only needed for the drive
above the ODD and should be fitted
on the one side prior to installation.
Each HD requires four anti-vibration
mount screws, secured as shown,
which will isolate the drive from the
chassis once installed
To install drives 1,2 and 3, begin by removing the two thumb screws...
To install the 4th HD above the optical drive...
*A fifth drive can be installed to the S16V, using the HM100 hard drive mount (optional).
mount
screw
mount
bracket
10
Autres manuels pour S10V
1
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Origen ae Enceinte
