Orient BTP-R880NP Manuel utilisateur
I
IN
NS
ST
TA
AL
LL
LA
AT
TI
IO
ON
N
M
MA
AN
NU
UA
AL
L
Single Station Thermal Printer
zThis printer has been manufactured and branded for ORIENT Technologies
B.V. by Shandong New Beiyang Information Technology Co., Ltd.
zDesign and specifications are subject to change without notice. Ask your
supplier for technical specifications before purchase and/or use.
zWhenever in doubt about safety issues that might arise from using this product,
please contact the supplier immediately for assistance.
M
Mo
od
de
el
l:
:B
BT
TP
P-
-R
R8
88
80
0N
NP
P
BTP-R880NP Installation manual
Declaration
Information in this document is subject to change without notice. Shandong New Beiyang Information
Technology Co., Ltd. (hereinafter referred to as “New Beiyang”) reserves the right to improve products
as new technology, components, software, and firmware become available. If users need the further
data about these products, please feel free to contact New Beiyang or your local agents.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or
mechanical, for any purpose without the express written permission of New Beiyang.
Copyright
Copyright © 2010 by SNBC
Printed in China
Version 1.0
Trademarks
Our registered trademarks are
Symbol Conventions
- 1 -
Warning Items shall be strictly followed to avoid damages to body and equipment.
Caution Items with important information and prompts for operating the printer.
Certifications
The control system of SNBC has been approved of the following certification:
ISO9001 quality control system certification
ISO14001 environmental control system certification
OHSAS18001 profession health safety control system certification
IECQ QC080000 hazardous material process control system certification
BTP-R880NP has been approved of the following certification:
WEEE directive 2002/96/EC
ORIENT Technologies bv is complying with all aspects of the European Union’s WEEE directive
2002/96/EC. All the customers and end-users can send the products that have reached the end of
their lifes and are to be recycled, to ORIENT Technologies bv. ORIENT Technologies bv will take
care of the recycling of these products in an environmentally responsible manner in accordance with
WEEE directive.
Contact us
In CHINA:
Address: No.169 Huoju Rd, Weihai, Shandong, China. 264209
Hot line: +86-631-5673777
Fax: +86-631-5673778
E-mail: sales@newbeiyang.com
Website: www.newbeiyang.com (via Contact button)
In EUROPE: ORIENT Technologies bv
Address: Meerheide 115, 5521 DX Eersel, The Netherlands
Hot line: +31-497-331080
Fax: +31-497-386430
Website: www.orient-technologies.com (via Contact button)
BTP-R880NP Installation manual
- 1 -
CONTENT
GENERAL SAFETY INFORMATION ......................................2
1 INTRODUCTION OF BTP-R880NP .....................................3
2 PARTS IDENTIFICATIONS..................................................3
3 SETTING UP THE PRINTER ...............................................4
3.1 UNPACKING....................................................................................... 4
3.2CONNECTING THE CABLES ............................................................. 4
3.2.1 INTERFACE CONNECTOR......................................................... 5
3.2.2 CASH DRAWER CONNECTOR .................................................. 7
3.3LOADING THE PAPER ROLL ............................................................. 8
3.4 PAPER NEAR END ADJUSTMENT ................................................. 10
3.4.1 PAPER NEAR END POSITION ADJUSTMENT ........................ 10
3.4.2 REMAINING PAPER AMOUNT ADJUSTMENT ........................ 11
4 SWITCH, BUTTON AND LED............................................11
4.1 POWER SWITCH ............................................................................. 11
4.2 FEED BUTTON................................................................................. 11
4.3 LED AND BUZZERS......................................................................... 13
5 SPECIFICATIONS..............................................................13
5.1 GENERAL SPECIFICATIONS .......................................................... 13
5.2 AUTO CUTTER SPECIFICATIONS.................................................. 14
5.3 INTERFACE...................................................................................... 14
5.4 ELECTRIC PARAMETERS OF THE POWER SUPPLY................... 14
5.5 ENVIRONMENTAL CONDITIONS.................................................... 14
5.6 RELIABILITY..................................................................................... 15
5.7 BLACK MARK SPECIFICATIONS.................................................... 15
5.8 OVERALL DIMENSION .................................................................... 16
6 WALL MOUNTING.............................................................16
7 FEED BUTTON CONFIGURATION ...................................17
BTP-R880NP Installation manual
General Safety Information
Before installing and using the printer, please read the following items carefully.
Safety Labels
Don’t touch the cutter and tear bar of printer.
The print head is a thermal element and it is at high temperature during printing or just
after operation, therefore please do not touch it and its peripherals for safety reasons.
- 2 -
The thermal head is an ESD-sensitive device. To prevent damage, do not touch either
its printing part or connecting parts.
Caution
Install the printer on a flat and stable place.
Reserve adequate space around the printer so that convenient operation and maintenance can be
performed.
Keep the printer away from water source.
Do not use or store the printer in a place exposed to heat of fire, moisture, serious pollution and
direct sunlight.
Do not place the printer on a place exposed to vibration or impact.
No dew condensation is allowed to the printer. In case of such condensation, do not turn on the
power until it has completely gone away.
Connect the DC adapter to an appropriate grounding outlet. Avoid sharing a single electrical with
large power motors and other devices that may cause the fluctuation in voltage.
Disconnect the DC adapter when the printer is not used for a long time.
Don’t spill water or other materials on the printer. If this happens, turn off the power immediately.
Do not allow the printer to start printing when there is no recording paper installed, otherwise the
print head and platen roller will be damaged.
To ensure quality print and normal lifetime, use recommended or good quality paper.
Shut down the printer when connecting or disconnecting interfaces connectors to avoid damage to
the control board.
Set the print darkness to a lower grade as long as the print quality is acceptable. This will help to
keep the print head durable.
The printer should only be disassembled or repaired by a technician, who is certified by the
manufacturer.
Keep this manual safe and at hand for ready reference.
BTP-R880NP Installation manual
1 Introduction of BTP-R880NP
BTP-R880NP is a high performance thermal printer, which can be widely used for
real-time printing application, such as POS system, restaurant system, ATM, etc.
BTP-R880NP can be connected with other devices via parallel interface, serial
interface, USB, Ethernet or WIFI and is available for WINDOWS 2000/XP/Server
2003/VISTA/WIN7/ Server2008, Linux and MAC.
2 Parts Identifications
1—Power LED
2—Error LED
3—Feed button
4—Tear bar
5—Top cover latch
6—Cutter cover
7—Middle cover
8—Power switch
9—Top cover
- 3 -
10—LOGO plate
11—Top cover
12—Paper sensor
13—Top-cover-open sensor
The sensor detects whether the top
cover is closed or not.
14—Paper guide
The printer contains two paper guides.
One is installed in the printer on the right
hand side; the second one is added in
the box of the printer.-There are 4 long slots
at the base of paper holder, Putting the paper
guides in different slots will allow the printer
to use different paper widths listed as follows:
Without any paper guide: 82.5±0.5mm.
A paper guide in the slot 1: 80±0.5mm
A paper guide in the slot 2: 76±0.5mm
A paper guide in the slot 3: 69.5±0.5mm
Paper guides in the slot 3 and 4: 57 ±0.5mm
BTP-R880NP Installation manual
Caution: The paper guides are indispensable parts of the printer and should
be kept safely with the printer.
15—Paper-near-end sensor
For continuous paper, this sensor is used to detect whether the paper roll has
run out or near the end of the roll.
16—Printer platen
17—Power connector
18—Cash drawer connector
19—USB connector
20—Interface connector
3 Setting up the Printer
3.1 Unpacking
Check whether all items, which are listed on the packing list, are present and in a
good condition. If any item is damaged or missing, please contact your dealer.
3.2Connecting the Cables
You can connect the cables that are required for printing, to the printer. They all
connect to the connector panel at the back of the printer, which is shown below.
Before connecting any of the cables, make sure that both the printer and the
computer are turned off.
- 4 -
BTP-R880NP Installation manual
3.2.1 Interface Connector
RS-232 serial interface
- 5 -
Pin Signal
name
Signal
direction Function
1 FG — Frame ground
2 TXD Output Transmit data
3 RXD Input Receive data
4 RTS Output Same as DTR signal
6
DSR Input This signal indicates whether the host computer can
receive data.
SPACE indicates that the host computer can receive
data, and MARK indicates that the host computer
cannot receive data.
When DTR/DSR control is selected, the printer
BTP-R880NP Installation manual
- 6 -
transmits data after confirming this signal (except when
transmitting data by DLE EOT, and GS a).
When XON/XOFF control is selected, the printer does
not check this signal.
7 SG — Signal ground
20 DTR Output 1) When DTR/DSR control is selected, this signal
indicates whether the printer is busy. SPACE
indicates that the printer is ready to receive data,
and MARK indicates that the printer is busy.
2) When XON/XOFF control is selected:
The signal acts the same as when DTR/DSR
control is selected.
Parallel interface
Pin Source Function Pin Source Function
1 H NStrobe 19 Signal Ground (nStrobe)
2 H Data 0
(Least Significant Bit) 20 Signal Ground (Data 1)
3 H Data 1 21 Signal Ground (Data 2)
4 H Data 2 22 Signal Ground (Data 3)
5 H Data 3 23 Signal Ground (Data 4)
6 H Data 4 24 Signal Ground (Data 5)
7 H Data 5 25 Signal Ground (Data 6)
8 H Data 6 26 Signal Ground (Data 7)
9 H Data 7
(Most Significant Bit) 27 Signal Ground (Data 8)
10 P NAck 28
Signal Ground
(PError, Select, and nAck)
11 P Busy 29
Signal Ground
(Busy and nFault)
12 P Perror 30
Signal Ground
(nAutoFd, nSelctIn, and nInit)
13 P Select 31 H NInit
14 H nAutoFd 32 P NFault
15 Not defined 33 Not defined
16 Logic Gnd 34 Not defined
17 Chassis Gnd 35 Not defined
18 P Peripheral Logic High 36 H nSelectIn
BTP-R880NP Installation manual
Ethernet
Pin Number Signal Name Function
1 TX+ Output Data+
2 TX- Output Data -
3 RX+ Input Data+
4 NC
5 NC
6 RX- Input Data -
7 NC
8 NC
USB interface
Pin Number Signal Name Function
1 VBUS +5V
2 DATA- Printer data transmit line minus
3 DATA+ Printer data transmit line plus
4 GND Ground
3.2.2 Cash Drawer Connector
On command of the host the printer can generate pulses via the connector for the
connected cash drawer to open (also known as cash-drawer-kick-out). The host can
retrieve the status of the drawer by using the DLE EOT, GS a, or GS r commands.
1) Pin assignments:
Pin Number Signal Name Function
1 Frame GND --
2 Drawer kick-out drive signal 1 Output Data
3 Drawer open/close signal Input Data
4 +24 V --
5 Drawer kick-out drive signal 2 Output Data
6 Signal GND --
2) Connector model:
Printer side: DuoYuan DY126-6P6C or equivalent
User side: 6-position 6-contact (RJ11 telephone jack)
3) Drawer kick-out drive signal
Output signal: Output voltage: Approximately 24V
Output current: 1A or less
- 7 -
BTP-R880NP Installation manual
3.3Loading the Paper Roll
Note: Be sure to use paper rolls that meet the specifications. Do not use paper rolls
that have the paper glued to the core because the printer cannot detect the
paper end correctly.
1) Turn off the printer.
2) Open the printer top cover, as in the following figure.
3) Put the paper roll into the paper holder. See figure below.
Note: Recommend paper
Paper type Manufactory
TF50KS-E2C,TF50KS-E Nippon Paper Industries Co., Ltd
F70NA FUJI PHOTO FILM Co., Ltd
F240AC/F220-VP,FV230A1,PA220AG,HP220A Mitsubishi Paper Mill Co., Ltd.
PD150R,PD160R OJI Paper Co.,Ltd.
F5041，F5051，P5045，P5055 Mitsubishi HitTec Paper Flensburg GmbH
KF50，KP440 Kanzan Spezialpapiere GmbH
KT55F20，KT58F20，KT55HS Papier-fabrik August Koehler AG
P300，P350，P530 Kanzaki Specialty Paper
Caution:
Adjust the paper width by adjusting the paper guides according to the paper
type used.
Make sure that the paper roll is cut according to the requirement below before
loading:
Make sure that the heat sensitive side of paper faces the print head and the
rolling direction of paper meets the requirements. (See drawings under the top
cover). Note: If needed the heat sensitive side of the paper can be found by
scratching both sides of the paper with a hard object. The scratches on heat
- 8 -
Autres manuels pour BTP-R880NP
1
Table des matières
Autres manuels Orient Imprimante
