Oricom HFS1000 Manuel utilisateur

User Guide
HFS1000 Non-Contact Infrared Thermometer
HFS1000 is included as a medical device on the Australian
Register of Therapeutic Goods (ARTG No. 279076).
HFS1000 is intended for use as a measuring device for determining the patient's body temperature. ALWAYS
READ THE LABEL AND USER GUIDE, USE ONLY AS DIRECTED.
Keep this user guide for future reference. Always retain your proof of purchase in case of warranty service and
register your product on line at AUSTRALIA: www.oricom.com.au

Need Help?
If you need assistance setting up or using your Oricom product now or in the future, call Oricom
Support.
Australia 1300 889 785 or 02 4574 8888
www.oricom.com.au
Mon-Fri 8am – 6pm AEST
New Zealand 0800 67 42 66
www.oricom.co.nz
Mon-Fri 10am – 8pm NZST

HFS1000 NoN-coNtact iNfrared thermometer 3
How to take a temperature 10
product description 14
Before first use 16
switcHing on and setting tHe tHermometer 16
measuring Body temperature 17
displaying stored measurements 20
Table of Contents

HFS1000 NoN-coNtact iNfrared thermometer
4
measuring oBject temperature 21
measuring room temperature 23
error messages 24
Battery replacement 26
maintenance and storage 27
product specifications 28
customer support 31

HFS1000 NoN-coNtact iNfrared thermometer 5
important 31
How to make a claim under warranty in australia 32
important information 33
warranty information (australia) 33

HFS1000 NoN-coNtact iNfrared thermometer
6
Thank you for purchasing the Oricom HFS1000 Non-contact Infrared Thermometer.
This product has been developed using the latest in infrared technology. This technology allows the user to
measure the temperature without physical contact. To use this device correctly please follow the directions in this
user guide. The instructions provide important details on how to achieve accurate measurements.
Warnings
Please read this user guide carefully before initial use.
• Use this product only for its intended purpose as described in this manual and follow all instructions.
• The measurement of temperature using this product does not represent a doctors medical examination.
• Consult with your medical professional if any abnormality is found.
• Do not take a temperature measurement over a scar or open tissue.
• Do not expose the product to temperatures below 20 °C (68 °F) or above 50 °C (122 °F) or above humidity of
95%(≥95%Rh).
• Do not drop the thermometer as it may cause damage.
• Donottakethetemperaturewiththisproductnearheatsourcessuchasindirectsunlight,nearareplaceor
stove.

HFS1000 NoN-coNtact iNfrared thermometer 7
• Do not use this product if it is not working properly, contact Oricom support.
• There are no user serviceable parts the only service required is battery replacement and general cleaning please
follow instructions in this user guide.
• If the product is not going to be used for an extended period of time, please remove the batteries and store the
thermometer in a cool dry place.
• This product is NOT waterproof. Direct contact with water or other liquids should be avoided.
• Do not leave the thermometer with infants or children at any time.
• The protective glass over the lens is fragile, handle with care. Do not touch the glass of the infrared lens with bare
ngers.
• Do not modify or repair the thermometer.
• Many people may not have an elevated temperature even if they are ill. In the following cases, please consult
your medical professional before using this product.
> Under 90-day-old infants.
> People on steroids, antibiotics or antipyretics.
> People with compromised immune systems.

HFS1000 NoN-coNtact iNfrared thermometer
8
Cautions
• The reliability of the measurement cannot be guaranteed if the temperature is measured from parts of body that
are not recommended.
• Similar to other thermometers, measurement error may occur within a range of ±0.2 °C (±0.4 °F).
• Measurement should not be taken until completely relaxed at normal room temperature.
• Please note that measurement may be incorrect after exercising, bathing or getting wet in the rain.
• Temperature between right and left temple could be different.
• Measurement may be incorrect when low battery ( ) signal is indicated. Replace the battery and re-measure.
• When measuring the temperature of a liquid (milk, water), place the probe as close as possible to the liquid but
ensure that it is not immersed into the liquid as this may damage your thermometer.
• Check your product regularly for damage and exhausted batteries.
NOTE:
ASTM laboratory accuracy requirements in the display range of 22 to 40 °C (71.6 °F to 104.0 °F) for IR
thermometers is ±0.3 °C (±0.5 °F), whereas for mercuryin-glass and electronic thermometers, the requirement
per ASTM Standards E 667-86 and E 1112-86 is ±0.1 °C (±0.2 °F).

HFS1000 NoN-coNtact iNfrared thermometer 9
Simple Operation Principle
Thebodytemperatureisreectedonthetemporalartery.
• The temporal artery is the artery located closest to the skin and is spread across the forehead. If the blood with
bodytemperaturereectionpassesthetemporalarteryonforehead,correspondingamountofinfraredrayswill
be generated. From the infrared rays, the body temperature can be measured.
• This product is a contactless type thermometer and does not make direct contact with forehead.
•The temperature measurement can be taken 2 to 3 cm away from the body or object.
• This will decrease discomfort or possible infections caused by touch.

HFS1000 NoN-coNtact iNfrared thermometer
10
How to take a temperature
IMPORTANT
If sweating on the forehead is present
we recommend changing the
measurement point to behind to earlobe.
Wipe away sweat on the forehead and
push back any hair from the forehead
before use.
▶
Recommended measurement is the temple area.
2~3 cm away
from forehead.
▶
If there is a significant change of surrounding temperature,
please, allow the thermometer to adjust to the new temperature
for at least 30 minutes before use.
▶
Or
Temple area
Wipe away sweatPush back hair
Behind the ear lob Incorrect measurement
2~3 cm
WAIT 30 Minutes
Behind the ear lobe
If you have applied an ice or cool pack, you need to wait for
at least 30 minutes before taking a temperature measurement.
The measurement should then be taken behind the ear lobe.
▶
▶
Do not measure temperature near heat or cooling sources.
Do not use outdoors.
▶
MEASUREMENT POINT
Table des matières
Autres manuels Oricom Thermomètre





















