Oregon Scientific RM888PA Manuel utilisateur

TRAVEL RADIO-CONTROLLED

PROJECTION CLOCK

MODEL: RM888PA

USER'S MANUAL

SECTION 1 INTRODUCTION

Congratulations on your purchasing the RM888PA RF Travel

Projection Clock.

The Travel Clock has a slim, compact design i.e. ideal for travel.

The RM888PAis designed to automatically synchronize its current

time and date when brought within range with the U.S.Atomic

Clock.

The Travel Clock has features such as time with alarm on/off status

projection, multilingual day-of-the-week display, back-light, dual

clock displays (analog and digital), user-selectable default clock

display and 8-minute snooze function.

C FDE

DC 7.5V

DISPLAY

A. DIGITAL CLOCK DISPLAY

1. Digital clock display

2. Alarm-on indicator

B. ANALOG CLOCK DISPLAY

1. Analog clock display

2. Radio-reception icon

3. Alarm-on indicator

CONTROL BUTTONS

C. [MODE] BUTTON

Press to change the display mode or press and hold to enter the

setting mode

D. [ALARM] BUTTON

Press to select the daily alarm function or press and hold to

enter the setting mode

E. [▲] AND [▼] BUTTONS

Change the value of a setting

F. [SNOOZE/ ] BUTTON

Press to activate the snooze function or turn on the back-light

and projection

G. [RESET] BUTTON

Press to return all settings to default values

H. CLOCK DISPLAY [SWAP] BUTTON

Press to change the default display of the clock

I. [LOCK] SLIDE SWITCH

Locks the key-operation and protects the projection lens while

travelling

J. [FOCUS] KNOB

Adjusts the focus of projection

K. 7.5 V DC JACK (with rubber-cover attached)

For AC power adapter installation

BEFORE YOU BEGIN

In order to operate this unit slide the [LOCK] to the left. This will

unlock the key-operation and expose the projection lens.

DC 7.5V

POWER

This unit can be either operated by batteries or AC power or with

both AC power and batteries.

DC 7.5V

Battery Installation:

1. Remove the battery compartment door.

2. Insert two AAA-sized (UM-4) 1.5V batteries as shown.

3. Press RESET.

4. Replace the battery compartment door.

When the battery power level is low, the analog clock display will

start to blink. Replace the batteries or connect it with AC power

adapter and press RESET.

This unit is equipped with a short-term power back-up feature. It

can still operate for a short period of time even after it has been

disconnected from the power supply. Therefore, all settings can be

saved during battery replacement. During this period, the analog

clock display will also blink. In this case, replace the batteries or

connect it with AC power adapter .

Note: Under normal circumstances, the batteries are good for 1

year. However, the battery life can be vastly reduced by frequent

use of the projector or snooze function.

If not disposed of properly batteries can be harmful. Pro-

tect the environment by taking the exhausted batteries

to authorized disposal stations.

HOWTOACTIVATE THE BACK-LIGHT

Press [SNOOZE/ ]to turn on the back-light for 5 seconds.

unlock lock

HOW TO USE THE PROJECTION

At night-time the projection makes it easy to read the time and the

alarm on/off status.

1. Slide the [LOCK] slide switch to expose the projection lens.

2. Press [SNOOZE/ ]to turn on the projection for 5 seconds.

The current time in digital format (as shown in the analog clock

display) will be projected onto the surface that the lens is fac-

ing. The alarm-on Indicator [ ] will also be projected if the

Alarm is activated.

3. Adjust the projected image using the [FOCUS] knob.

Forcontinuous projection, plug in the included 7.5volt DC adaptor.

When the power adapter is connected to the unit, the clock

projection will be activated. To keep the clock projection activated

press and hold [SNOOZE/ ]for 2 seconds. To deactivate the

feature, press and hold the snooze button for 2 seconds again or

simply remove the power adapter.

DC 7.5V

Note: Remember to leave the projection lens uncovered when the

continuous projection function is being activated.

When you are not using the clock projection feature, slide the

[LOCK]switch close in order to protect the lens and lock the keys.

SECTION 2

THE CALENDAR CLOCK

DEFAULTANALOG CLOCK DISPLAY

You can select the local time or home time(the radio-controlled

time) as the default analog clock display by using [SWAP] switch

hidden inside the battery compartment.When the local time is

selected or shown, the icon will be displayed.

DIGITAL DISPLAY MODES

Press [MODE] to display the following in sequence:

• Radio-ControlledClock Time(sameas thedefault analogclock

display) or Local Time.

• Day of the week

• Calendar (Month: Day or Day: Month format)

• 2nd time-zone (Local or home time)

Fig.1

Example of Digital and Analog Display: (Fig.1)

Home-time

(Radio-controlled time)

- 12:55pm (12:55)

Local-time

- 5:55pm (17:55)

(hour offset = +5 hours)

To display the alarm clock and details, press [ALARM].The daily

alarm time will appear in both the analog and the digital displays.

Example:

ABOUT RADIO RECEPTION

The RM888PA will automatically synchronize current time and

date with the signal broadcast by the US Atomic Clock when the

product is in reception range of the signal. When the unit is new

and just out of the box, synchronization with the U.S. atomic clock

can take upto 72 hours. The unit will receive the most dependable

and interference free signal automatically between Midnight and 4

AM.

When the unit is within range of radio signals, its radio-control

mechanism will override all manual settings unless the signal re-

ception is manually deactivated.

When it is receiving radio signal, the radio-reception icon [ ]

(strong signal) or [ ] (weak signal) will start to blink. A com-

plete reception generally takes about 2 to 10 minutes, depending

on the strength of the radio signal. After that, the periodical scan-

ning will take only a few seconds.

When the reception is complete, the radio-reception icon will stop

blinking and the radio-controlled time will be displayed accord-

ingly.

Icon [•] will be displayed if such reception is not successful. To

enforce such reception again, press and hold [▲] for 2 seconds.

For better reception of radio signals, place the clock away from

metal objects and electrical appliances to minimize interference.

HOW TO ENABLE OR DISABLE

AUTO-RECEPTION

Ifyou wish to disable radio signal auto-receptionwhile the unit is within

range, press and hold [ ▼ ] button for 2 seconds.The radio-reception

icon on the analog clock display will disappear and the unit will NOT

respond to radio signals.

To enable the feature again, press and hold [▲] for 2 seconds. The radio-

reception icon will be shown again and the analog clock display will

start blinking to initiate radio signal reception.

HOW TO SET THE CALENDAR CLOCK

MANUALLY

1. Press and hold [MODE] for 2 seconds.

2. Enter the U.S. time-zone (Pacific [ ], Mountain [ ],Cen-

tral [ ] or Eastern [ ]) using [▲]/[▼].

3. Press [MODE].

4. Enter the clock format using [▲]/[▼].You can select 12-hour or

24-hour display.

5. Press [MODE].

6. Enter the hours using [▲]/[▼]. Hold down either button for 2

seconds to rapidly increase or decrease the value.

7. Press [MODE].

8. Enter the minutes using [▲]/[▼].

9. Press [MODE].

10. Set the 2nd time-zone off-set hour by entering the hour differ-

ence between the local time and home time. You can select be-

tween + 23 and - 23 hours.

11. Follow the same pattern to set the year, date format (month-day

or day-month), month, day, and display language (English [E],

German [D], French [F], Italian [I] or Spanish [S]) for day-of-

the-week.

EF DIS

Monday MON LUN MON LUN LUN

Tuesday TUE MAR DIE MAR MAR

Wednesday WED MER MIT MER MIE

Thursday THR JEU DON GIO JUE

Friday FRI VEN FRE VEN VIE

Saturday SAT SAM SAM SAB SAB

Sunday SUN DIM SON DOM DOM

12. Press [MODE] to save the changes and exit. If changes are

made during the process, the seconds will reset and start from

zero.

The unit will also save all changes and return to normal display

automatically after the unit has been left idle for a minute or when

[ALARM] is pressed.

ABOUT THE ALARM

To set the alarm,

1. Press [ALARM] to enter theAlarm mode.

2. Press and hold [ALARM] for 2 seconds.

3. Use [▲]/[▼]to enter the hours.

4. Press [ALARM].

5. Use [▲]/[▼]to enter the minutes.

6. Press [ALARM].

The alarm will be automatically activated.The icon will appear

on the digital display and the Alarm-on icon will be displayed on

the analog display. To deactivate the alarm, press [▲]/[▼]when

the alarm time is displayed.

HOW TO USE THE DAILYALARM

The alarm will go off for 2 minutes in a two-step crescendo pattern.

The alarm-on indicators will flash, the back-light and the clock

projection will be activated for 5 seconds.To mute the alarm, press

anykey. Pressing[SNOOZE/ ]will activatethe snooze function.

SNOOZE FUNCTION

When the snooze function is activated, the alarm will be muted

temporarily and set off again after 8 minutes.To disable the snooze

function, press [ALARM].

SECTION 3

ADDITIONAL INFORMATION

THE RESET BUTTON

The [RESET]button is used to enhance synchronization of signals

after battery replacement or when the unit is operating in an

unfavorableway ormalfunctioning. Usea bluntstylus tohold down

the button. All settings will return to their default values.

Company Name: Oregon Scientific, Inc.

Address: 19861 SW 95th Place, Tualatin, Oregon 97062, USA

Website address: www.oregonscientific.com

CUSTOMER ASSISTANCE

Should you require assistance regarding this product and its

operation, please contact our customer care department at 800-

853-8883 or via email at [email protected].

WARRANTY

This product is warranted to be free of manufacturing defects for a

period of 3 months from date of retail purchase. Defective product

should be directed to the place of retail purchase for exchange.

Should this not be possible, contact our customer care department

for assistance and a return material authorization. No returns may

be made without a return authorization. Please retain your retail

receipt as you may be asked to provide a copy of it for proof of

date purchased.

This warranty does not cover product subjected to abuse, misuse,

accidental damage or tampering.

CAUTION

- The content of this manual is subject to change without

further notice.

- Due to printing limitation, the displays shown in this

manual may differ from the actual display.

- Thecontents ofthis manual may not be reproduced without

the permission of the manufacturer.

PRECAUTIONS

This product is engineered to give you years of satisfactory

service if you handle it carefully. Here are a few precautions:

1. Do not immerse the unit in water.

2. Do not clean the unit with abrasive or corrosive materials. They

may scratch the plastic parts and corrode the electronic circuit.

3. Do not subject the unit to excessive force, shock, dust,

temperature or humidity, which may result in malfunction,

shorter electronic life span, damaged battery and distorted parts.

4. Do not tamper with the unit's internal components. Doing so

will invalidate the warranty on the unit and may cause

unnecessarydamage.Theunit containsno user-serviceableparts.

5. Only use fresh batteries as specified in the user's manual. Do

not mix new and old batteries as the old ones may leak.

6. Always read the user's manual thoroughly before operating the

unit.

SPECIFICATIONS

Power : 2 pcs of UM-4 or AAA-size 1.5V

batteries

Power Adapter (Optional) : 7.5V DC

Weight : 2.75 oz.( 78g )

Dimensions (mm) : 3.94” x 2.36” x.79”

(100 x 60 x 20 mm)

Accessory : Leather pouch for carrying

Table des matières

Autres manuels Oregon Scientific Horloge

Oregon Scientific

Oregon Scientific RMR132HG Manuel utilisateur

Oregon Scientific

Oregon Scientific RRM320P Manuel utilisateur

Oregon Scientific

Oregon Scientific POLERMO RMR939PA Manuel utilisateur

Oregon Scientific

Oregon Scientific RM116E Manuel utilisateur

Oregon Scientific

Oregon Scientific DP100 Manuel utilisateur

Oregon Scientific

Oregon Scientific RMB899P Manuel utilisateur

Oregon Scientific

Oregon Scientific RM912B Manuel utilisateur

Oregon Scientific

Oregon Scientific RMR500ES Manuel utilisateur

Oregon Scientific

Oregon Scientific RM308P Manuel utilisateur

Oregon Scientific

Oregon Scientific RMR391PU Manuel utilisateur

Oregon Scientific

Oregon Scientific RM802 Manuel utilisateur

Oregon Scientific

Oregon Scientific RMR613HGA Manuel utilisateur

Oregon Scientific

Oregon Scientific JW108 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM968 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM318PA Manuel utilisateur

Oregon Scientific

Oregon Scientific RRM320P Manuel utilisateur

Oregon Scientific

Oregon Scientific RM868PA Manuel utilisateur

Oregon Scientific

Oregon Scientific RM832A Manuel utilisateur

Oregon Scientific

Oregon Scientific RM928N Manuel utilisateur

Oregon Scientific

Oregon Scientific RRA320PNX Manuel utilisateur

Oregon Scientific

Oregon Scientific JMR868A Manuel utilisateur

Oregon Scientific

Oregon Scientific PRYSMA R Manuel utilisateur

Oregon Scientific

Oregon Scientific 983U Manuel utilisateur

Oregon Scientific

Oregon Scientific RM368P Manuel utilisateur

Manuels Horloge populaires d'autres marques

Silicon Laboratories

Silicon Laboratories SI5324 Manuel utilisateur

Heathkit

Heathkit GC-1005 Manuel utilisateur

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuel utilisateur

ALGE-Timing

ALGE-Timing ASC3 Manuel utilisateur

Bodet

Bodet Profil 960 Manuel utilisateur

Nixie Clock

Nixie Clock Divergence Meter Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8256-AL Manuel utilisateur

Mini Gadgets

Mini Gadgets MCPro Manuel utilisateur

Casio

Casio TMR-200 Manuel utilisateur

Progetti

Progetti ILTEMPOSTRINGE Manuel

BVItech

BVItech BV-101 Manuel utilisateur

Progetti

Progetti KALIMERO Manuel

La Crosse Technology

La Crosse Technology WT-3141b Manuel

La Crosse Technology

La Crosse Technology W86531 Manuel utilisateur

Sharp

Sharp SPC900 Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-50447 Manuel utilisateur

Datexx

Datexx DF0063 Manuel utilisateur

LG LEC-005 Manuel utilisateur