Oregon Scientific JM889NR Manuel utilisateur

Jumbo Wall Clock

Model: JM889NR

USER MANUAL

Jumbo Wall Clock

Model: JM889NR

USER MANUAL

CONTENTS

Introduction ............................................................. 2

Overview .................................................................. 2

Front View ............................................................ 2

Back View ........................................................... 2

LCD Display ......................................................... 3

Getting started ......................................................... 3

Insert Battery ......................................................... 3

Placement Of Unit. ................................................ 3

Clock ........................................................................ 3

Clock Reception ................................................... 3

Set The Clock Manually ........................................ 4

Alarm ........................................................................ 4

Basic Functions .................................................... 4

Displaying Alarm Time .......................................... 4

Set The Alarm ....................................................... 4

Enable/Disable The Alarm .................................... 5

Reset ........................................................................ 5

Precautions ............................................................. 5

Speciﬁcations ........................................................ 6

About Oregon Scientiﬁc ......................................... 6

FCC Statement ......................................................... 6

Declaration Of Conformity ...................................... 7

Disposal Information For Users ............................. 8

EU-Declaration Of Conformity ................................ 8

INTRODUCTION

Thanks for purchasing the Oregon ScientiﬁcTM Jumbo

Wall Clock (JM889NR).

NOTE

Please keep this manual handy as you use

your new product. It contains practical step-by-step

instructions, as well as technical speciﬁcations and

warnings you should know about.

OVERVIEW

FRONT VIEW (FIG 1)

ZNE

1. Current time and RF signal reception indication

2. Seconds or weekday display

3. Current Date/Alarm Time Display

4. Indoor temperature display

BACK VIEW (FIG 2)

EU UK US

J M8 8 9 N R MADE I N C HI NA

5. Wall-mount hole

6. Alarm: Display and adjust alarm time

7. Clock: Manually adjust current time and date

8. Reset: Returns all settings to default values

9. EU/UK/US: Slide to select the desired clock

reception; time and date setting

10.

/ : Increase/decrease settings; enable/disable

radio reception

11. Battery compartment

12. Table stand

NOTE

Reset the clock after changing the slide switch

position. See Reset section.

LCD DISPLAY

Icon Description Explanation

Clock signal

reception

Indicates the condition

of radio reception.

Low Battery Appears when power

is low.

Alarm-on Appears when alarm is

activated.

Alarm Time

Indicator

Appears when alarm time

is displayed.

GETTING STARTED

INSERT BATTERY

1. Remove the battery compartment cover (see FIG 2).

2. Install the batteries, matching the polarities.

3. Press Reset after each battery replacement.

NOTE

Replace the batteries when displays,

or when the display is dim.

PLACEMENT OF UNIT

The clock can be mounted on a wall or stand on a

ﬂat surface.

Method Instruction

Table

Stand

Pull out the table stand (see FIG 2)

at the back of unit, then place the main

unit on a ﬂat surface.

Wall

Mount

a) Position and insert the screw into

the desiredposition.

b) Leave ample space between the

wall and the screwhead. Check the

screw is securely inserted.

c) Fit the unit’s Wall mount hole onto

the screw head.

CLOCK

CLOCK RECEPTION

This clock is designed to synchronize its clock

automatically with a clock signal.

Slide to select the desired region (EU/UK/US).

Region Signal

EU DCF

UK MSF

US WWVB

Clock signal reception indicator:

Strong

signal

Weak

signal

Receiving

signal

NOTE

It takes 2-10 minutes to receive the clock

signal. If the signal is weak, it could take up to 24 hours

to receive a valid signal.

To enable/disable signal reception:

Press and hold and .

SET THE CLOCK MANUALLY

1. Press and hold / to disable signal reception.

2. Press and hold Clock. The screen displays ZONE

and the number ﬂashes.

3. Press once or press and hold / to adjust the

setting. For EU/UK, the time-zone offset sets the

clock up to +/- 23 hours from the received clock

signal time. For US, the time-zone setting is 0(P),

1(M), 2(C), 3(E).

4. Press Clock to conﬁrm.

5. Press once or press and hold / to adjust the

setting for 12/24h hour format, hour, minute, year,

calendar format (month-day/day-month), month,

date, language and temperature unit (oC/oF).

6. Press Clock to conﬁrm.

NOTE

The language options are English (E),

German (D), French (F), Italian (I), and Spanish (S).

To select the display mode:

Press Clock to select between seconds and

weekday display.

NOTE

When the temperature is lower than -5 oC (29.0 oF),

the screen displays LL.L. When the temperature is

higher than 50 oC (122.0 oF), the screen displays HH.H.

ALARM

BASIC FUNCTIONS

1. When the daily alarm goes off, press Alarm to stop.

2. The alarm will stop after 2 minutes. Then it will go

off again after 8 minutes unless Alarm is pressed.

DISPLAYING ALARM TIME

1. Press Alarm when the screen displays the current date.

2. To display the current date, press Clock when the

screen displays the alarm time.

SET THE ALARM

1. Press and hold Alarm. The hour of alarm

display ﬂashes.

2. Press once or press and hold / to change

the settings.

3. Press Alarm to conﬁrm. displays.

ENABLE/DISABLE THE ALARM

When the LCD displays the alarm time set. Press

Alarm to enable or disable the daily alarm. displays

when the alarm is enabled.

To disable the alarm, press Alarm when the clock is

in idle. The disappears.

NOTE

When you press Alarm while the alarm goes off,

it only stops the alarm. To disable the alarm, make sure

the clock is in idle.

RESET

Press Reset at the back of the clock using a pointed

object. All settings restore to default.

PRECAUTIONS

• Do not subject the unit to excessive force, shock,

dust, temperature or humidity.

• Do not cover the ventilation holes with any items

such as newspapers, curtains etc.

• Do not immerse the unit in water. If you spill liquid

over it, dry it immediately with a soft, lint-free cloth.

• Do not clean the unit with abrasive or corrosive

materials.

• Do not tamper with the unit’s internal components

This invalidates the warranty.

• Only use fresh batteries. Do not mix new and

old batteries.

• Images shown in this manual may differ from the

actual display.

• When disposing of this product, ensure it is

collected separately for special treatment and not

as normal household waste.

• Placement of this product on certain types of

wood may result in damage to its ﬁnish for which

Oregon Scientiﬁc will not be responsible. Consult

the furniture manufacturer’s care instructions for

information.

• The contents of this manual may not be reproduced

without the permission of the manufacturer.

• Do not dispose old batteries as unsorted municipal

waste. Collection of such waste separately for

special treatment is necessary.

• Please note that some units are equipped with a

battery safety strip. Remove the strip from the

battery compartment before ﬁrst use.

SPECIFICATIONS

TYPE DESCRIPTION

L x W x H 234 x 220 x 23 mm

Weight 426g

(without battery)

Operation range 0 oC to 40 oC (32 oF to 104 oF)

Default temperature

unit

oC (EU/UK)

oF (US)

Radio frequency

System

DCF

MSF

WWVB

Time format 24/12 Hour with AM/PM

Date format MM:DD/DD:MM

Day-of-week display English/French/German/

Spanish/Italian

Alarm duration 2 minutes

Power 2 x UM-3 (AA) 1.5 V

batteries

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientiﬁc.com) to learn

more about Oregon Scientiﬁc products.

For any enquiry, please contact our Customer Services

at info.oregonscientiﬁc.com.

Oregon Scientiﬁc Global Distribution Limited reserves

the right to interpret and construe any contents, terms

and provisions in this user manual and to amend it,

at its sole discretion, at any time without prior notice.

To the extent that there is any inconsistency between

English version and any other language versions, the

English version shall prevail.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired

operation.

WARNING

Changes or modiﬁcations not expressly

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

NOTE

This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio / TV

technician for help.

This Class B digital apparatus complies with Canadian

ICES-3(B)/NMB-3(B)

DECLARATION OF CONFORMITY

The following information is not to be used as contact for

support or sales. Please call our customer service number

(listed on our website at www.oregonscientiﬁc.com), or on

the warranty card for this product) for all inquiries instead.

Name: Oregon Scientiﬁc, Inc.

Address: 10778 SW Manhasset Dr.

Tualatin, Or 97062 USA

Telephone No.: 1-800-853-8883

declare that the product

Product No.: JM889NR

Product Name: Jumbo Wall Clock

Manufacturer: IDT Technology Limited

Address: Block C, 9/F, Kaiser Estate,

Phase 1, 41 Man Yue St.,

Hung Hom, Kowloon,

Hong Kong

is in conformity with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference

received, including interference that may cause

undesired operation.

DISPOSAL INFORMATION FOR USERS

Pursuant to and in accordance with Article 14

of the Directive 2012/19/EU of the European

Parliament on waste electrical and electronic

equipment (WEEE), and pursuant to and in

accordance with Article 20 of the Directive

2006/66/EC of the European Parliament on batteries

and accumulators and waste batteries.

The barred symbol of the rubbish bin shown on the

equipment indicates that, at the end of its useful life, the

product must be collected separately from other waste.

Please note that the batteries / rechargeable batteries

must be removed from the equipment before it is given

as waste. To remove the batteries / accumulators refer

to the speciﬁcations in the user manual. Therefore, any

products that have reached the end of their useful life

must be given to waste disposal centres specialising

in separate collection of waste electrical and electronic

equipment, or given back to the dealer when purchasing

a new WEEE, pursuant to and in accordance with

Article 14 as implemented in the country.

The adequate separate collection for the subsequent

start-up of the equipment sent to be recycled, treated

and disposal of in an environmentally compatible way

contributes to preventing possible negative effects on

the environment and health and optimises the recycling

and reuse of components making up the apparatus.

Abusive disposal of the product by the user involves

application of the administrative sanctions according to

the laws in force.

EU-DECLARATION OF CONFORMITY

Hereby, Oregon Scientiﬁc, declares that this Jumbo

Wall Clock (Model: JM889NR) is in compliance with

EMC directive 2004/108/EC. A copy of the signedand

dated Declaration of Conformity is available on request

via our Oregon Scientiﬁc Customer Service.

COUNTRIES RTTE APPROVED COMPLIED

All EU countries, Switzerland

and Norway

Orologio da parete Jumbo

Modello: JM889NR

Manuale utente

INDICE

Introduzione ............................................................ 2

Panoramica ............................................................. 2

Visualizzazione Frontale ...................................... 2

Visualizzazione Posteriore ................................... 2

LCD Display ......................................................... 3

Per Cominciare ....................................................... 3

Inserire Le Batterie .............................................. 3

Posizionamento Dell’orologio . ............................. 3

Orologio ................................................................... 3

Ricezione Dell’orologio ........................................ 3

Impostare L’orologio Manualmente ...................... 4

Sveglia ..................................................................... 4

Funzioni Di Base .................................................. 4

Visualizzazione Orario Della Sveglia ................... 5

Impostare La Sveglia ........................................... 5

Accensione / Spegnimento Sveglia ..................... 5

Reset ....................................................................... 5

Precauzioni ............................................................. 5

Speciﬁche ............................................................... 6

Informazioni Su Oregon Scientiﬁc ....................... 6

Dichiarazione Di Conformita’ue ............................ 6

Table des matières

Langues :

Autres manuels Oregon Scientific Horloge

Oregon Scientific

Oregon Scientific RM336PES Manuel utilisateur

Oregon Scientific

Oregon Scientific DP200 Manuel utilisateur

Oregon Scientific

Oregon Scientific PRYSMA B Manuel utilisateur

Oregon Scientific

Oregon Scientific BAR339P Manuel utilisateur

Oregon Scientific

Oregon Scientific RM331P Manuel utilisateur

Oregon Scientific

Oregon Scientific CIR100 Manuel utilisateur

Oregon Scientific

Oregon Scientific JM889 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM116E Manuel utilisateur

Oregon Scientific

Oregon Scientific TW223 Manuel utilisateur

Oregon Scientific

Oregon Scientific JMR838WFA Manuel utilisateur

Oregon Scientific

Oregon Scientific RMR391P Manuel utilisateur

Oregon Scientific

Oregon Scientific CP100 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM868PA Manuel utilisateur

Oregon Scientific

Oregon Scientific RAR601 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM822 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM308P Manuel utilisateur

Oregon Scientific

Oregon Scientific EMR801 Manuel utilisateur

Oregon Scientific

Oregon Scientific BAR339P Manuel utilisateur

Oregon Scientific

Oregon Scientific RRM326P Manuel utilisateur

Oregon Scientific

Oregon Scientific DP200 Manuel utilisateur

Oregon Scientific

Oregon Scientific BAR332ES Manuel utilisateur

Oregon Scientific

Oregon Scientific PROJI Manuel utilisateur

Oregon Scientific

Oregon Scientific PRYSMA B Manuel utilisateur

Oregon Scientific

Oregon Scientific BAR669H Manuel utilisateur

Manuels Horloge populaires d'autres marques

Silicon Laboratories

Silicon Laboratories SI5324 Manuel utilisateur

Heathkit

Heathkit GC-1005 Manuel utilisateur

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuel utilisateur

ALGE-Timing

ALGE-Timing ASC3 Manuel utilisateur

Bodet

Bodet Profil 960 Manuel utilisateur

Nixie Clock

Nixie Clock Divergence Meter Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8256-AL Manuel utilisateur

Mini Gadgets

Mini Gadgets MCPro Manuel utilisateur

Casio

Casio TMR-200 Manuel utilisateur

Progetti

Progetti ILTEMPOSTRINGE Manuel

BVItech

BVItech BV-101 Manuel utilisateur

Progetti

Progetti KALIMERO Manuel

La Crosse Technology

La Crosse Technology WT-3141b Manuel

La Crosse Technology

La Crosse Technology W86531 Manuel utilisateur

Sharp

Sharp SPC900 Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-50447 Manuel utilisateur

Datexx

Datexx DF0063 Manuel utilisateur

LG LEC-005 Manuel utilisateur