Optoma Optoma EP 610 (H) Manuel utilisateur
English 1
Usage Notice
Precautions .......................................................................................... 2
Introduction
About the Product................................................................................. 3
Package Overview ............................................................................... 4
Installation
Product Overview ................................................................................. 5
Connecting the Projection Display ....................................................... 8
Powering On/Off the Projection Display ............................................... 9
Adjusting the Image Size ...................................................................... 10
User Controls
User Controls ....................................................................................... 12
OSD Menus ......................................................................................... 14
Appendices
Troubleshooting .................................................................................... 18
Maintenance......................................................................................... 20
Specifications ....................................................................................... 23
Compatibility Modes............................................................................. 24
Table of Contents
English
2
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user’s manual to maximize the life of your unit.
Do:
qTurn off the product before cleaning.
qUse a soft cloth moistened with mild detergent to clean the display housing.
qDisconnect the power plug from AC outlet if the product is not being used for a
long period of time.
Don’t:
qBlock the slots and openings on the unit provided for ventilation.
qUse abrasive cleaners, waxes or solvents for your cleaning.
qUse under the following conditions:
- Extremely hot, cold or humid environment.
- In areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- Place in direct sunlight.
Warning- Do not look into the lens. The bright light may hurt your eyes.
Warning- To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
Warning- Please do not open or disassemble the product as this may cause
electric shock.
Warning- When changing the lamp, please allow unit to cool down and follow
all changing instruction.
Warning- This product will detect the life of the lamp itself. Please be sure to
change the lamp when it shows warning messages.
Warning- After changing a new lamp, please reset the lamp life timer from
OSD menu.
Warning- Before switching off the product, please keep the cooling fan
running for a few minutes.
Usage Notice
!
!
!
!
!
!
!
English 3
About the Product
This product, designed with a high-powered UHP lamp, is an SVGA data/video
portable projection display. The outstanding feature of it are listed as follows:
q8.9 lbs. (4.0 kgs) lightweight compact design
qTrue SVGA, 800 x 600 addressable pixels
qWith XGA compression and VGA resizing
qMac / NEC PC-98 / FM Towns compatible
qNTSC / PAL / SECAM compatible
qDual Data Input
qReal plug and play with auto-image function
qUser-friendly multilingual on-screen display menu adjustment
qAdvanced electronic keystone correction function
qLuxurious carrying case with detachable wheels & handle
Introduction
English
4
Package Overview
This projection display comes with all the items shown below. Check to make
sure your unit is complete. Contact your dealer immediately if anything is
missing.
LCD Projection Display
Hard Carrying Case
With Detachable Wheels &
Handle
S-Video Cable RCA Audio/ Video Cable Audio-in Cable for
Computer
Remote Control
User’s Manual Warranty Card
Power Cord VGA Cable X 2
Batteries X 2
English 5
Product Overview
wMainUnit
Installation
* There are two elevator releasing buttons and elevator feet on both sides.
* There are also two remote control receivers on the front and the rear side.
RemoteControlReceiver
CarryingHandle Projection Lens
ElevatorFoot
Elevator
Releasing Button
Speakers
Panel Controls
Zoom Ring
Focus Ring
Air Filter Connector Ports
RemoteControl
Receiver
English
6
ww
ww
wPanelControls
Computer 1
Input Connector
Power Connector
Computer 2
Input Connector
Monitor Loop-Through
Connector
Audio Output Connector
Audio Input Connector
Audio Input
for Computer
Composite Video
Connector
S-Video
Connector
wConnectionPorts
Four Directional
Select Keys
Enter
English 7
wRemoteControl
Freeze/CLR
Zoom In / Zoom Out
Mute
Keystone
Power/Standby
Source
Volume
Four Directional Select Keys
Menu Enter
Reset
Resync
Tracking
English
8
Connecting the Projection Display
Power Cord
Audio Cable
S-Video Cable
VGA Cable
Audio Cable
Monitor Cable
RCA Audio
Video Cable
English 9
uu
uu
uPowering On the Projection Display.
1. Remove the lens cover
2. Plug the power cord into the back of the projector and plug it into the electrical outlet.
The “POWER/STANDBY” LED indicator will flash green.
3. Turn on the lamp by pressing “ POWER/STANDBY” button.
The startup screen displays and starts 30 seconds countdown for lamp .
The “POWER/STANDBY” LED indicator will lit green and stop flashing.
The “LAMP” LED indicator will flash amber for 30 seconds.
4. Make sure the computer or video signal is well connected. The projector will detect
your computer source automatically.
5. If necessary, make adjustments to the image from the projector’s On-Screen Display
(OSD)menus.
Powering On/Off the Projection Display
uu
uu
uPowering Off the Projection Display.
Turn off the lamp by pressing “ POWER/STANDBY” button. The confirmation message, ”Power off
the lamp? ” will show up. Please select “Yes” to turn off the lamp. “LAMP” LEDindicator will flash
amber for about one minute. After the “LAMP” LED indicator stops flashing, you may unplug the
power cord.
Warning:
* When the “LAMP” LED indicator lit amber for a long period of time, please change the lamp
module. Please contact your local dealer or distributor for replacement lamp and refer to “
Changing the lamp”(Page 21) in the manual.
* When the “TEMP” LED indicator lit amber, it indicates the display has been overheated. The
display will automatically shut itself down. While the “TEMP” LED indicator turns “off”, the
display can be switched on again for your presentation.
English
10
Adjusting the image size
ww
ww
wAdjust the height of projected image
Raise the projection display to the desired angle and then press the elevator
release buttons to release the elevator foot.
Fine-tune the height by manually turnig each foot.
Screen
Elevator Foot Elevator
Releasing Button
(Refer to the following figures below)
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Optoma Projecteur
Optoma
Optoma EH503 Manuel utilisateur
Optoma
Optoma HD7100 Manuel utilisateur
Optoma
Optoma EcoBright ZW212ST Manuel utilisateur
Optoma
Optoma TX763 Manuel utilisateur
Optoma
Optoma PlayTime PT105 Manuel utilisateur
Optoma
Optoma HD151X Manuel utilisateur
Optoma
Optoma Optoma EP721 Manuel utilisateur
Optoma
Optoma EX612 Manuel utilisateur
Optoma
Optoma EX532 Manuel utilisateur
Optoma
Optoma ES515 Manuel utilisateur
Optoma
Optoma X305ST Manuel utilisateur
Optoma
Optoma W415 Manuel utilisateur
Optoma
Optoma Optoma EP747 Manuel technique
Optoma
Optoma EH512 Manuel utilisateur
Optoma
Optoma E1P2A2F6E1Z1 Manuel utilisateur
Optoma
Optoma UHD65 Manuel utilisateur
Optoma
Optoma ML500 Manuel utilisateur
Optoma
Optoma EW1610 Family Manuel utilisateur
Optoma
Optoma HD25 Manuel utilisateur
Optoma
Optoma PRO160S Manuel utilisateur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
