Optoma HD86 Manuel utilisateur
Delta Elec. Inc. HD86
Company Confidential Optoma___________________ Delta________________
1 2009/08/18
DATA PROJECTOR
HD86 (HT-8601)
SERVICE MANUAL
Delta Elec. Inc. HD86
Company Confidential Optoma___________________ Delta________________
2 2009/08/18
CONTENTS
1.COMPLIANCE OF SAFE REPAIR.........................................................................................4
1-1.Caution During Disassembling And Assembling.............................................................4
1-2.Lamp..............................................................................................................................4
1-3.Lens................................................................................................................................4
1-4.Eye Safety Warnings......................................................................................................5
2.SPECIFICATIONS.................................................................................................................6
2-1.Summary Specifications................................................................................................. 6
2-2.DMD Specifications........................................................................................................7
2-3.Color Wheel................................................................................................................... 7
2-4.Lamp..............................................................................................................................7
2-5.Terminal connectors………………………………..……………………………………….…7
2-6.Main Unit View………………………………………………………………………………....8
2-7.I/O Ports Illustration about projector………….................................................................9
2-8.Remote Control Parts...................................................................................................10
2-9.Adjusting Projected Image Position Using PureShift………………………...………….. 13
2-10.PureShift Range Diagram…………………………………………………………….…....16
2-11.BLOCK DIAGRAM..................................................................................................... 18
2-12. Wire diagram………………………………………………………………………………..21
3.TROUBLE SHOOTING....................................................................................................... 23
4.DISASSEMBLYANDASSEMBLY…………........................................................................ 30
5.Flash Upgrade Flow............................................................................................................ 56
5-1.Projector RS-232 Drivers Installation Guide………………………………………..……..56
5-2.Start with the Flash Upgrader to PC………………......…………………………….…..56
5-3.Start-up page……………………………………………………………………………....57
5-4.Powering On/Off the Projector………………………………………………………..….....58
5-5.SETUP / Source Lock - HighAltitude - Auto Power Off………………..…….…………..60
5-6.SETUP / Signal…………………………………………………………………….....…...…61
6.Calibration……………………………..………………………………………….………………..63
7.Installingor Removingthe Optional Lens………………..………………………………….……...67
8.Projection Lamp………………………….………………………………………………………..69
9.Cleaning………………………………….………………………………………………………...73
Delta Elec. Inc. HD86
Company Confidential Optoma___________________ Delta________________
3 2009/08/18
10.SERVICE NOTE............................................................................................................... 74
10-1.Service Note Description........................................................................................... 74
10-2.Power & READY LED Blink Code Message...............................................................75
10-3.Factory Preset Display Modes....................................................................................77
11. RS-232 Command……………………………………………………………………………....78
12. EDID………………………………………………………………………………………….......82
13. Spare Part List .................................................................................................................90
Update History
No. Description Date
00 Primarily 08/18/2009
Delta Elec. Inc. HD86
Company Confidential Optoma___________________ Delta________________
4 2009/08/18
1. COMPLIANCE OF SAFE REPAIR
Be sure to read this Service Manual before providing services. In the projector, full
consideration is taken to ensure safety for fire, electric shock, injury, harmful radiation, and
substance. Therefore, observe the notice described in this Service Manual so that safety is
kept when providing services. Moreover, be sure to observe the notice described in the
Instruction Manual.
Pay attention to the following items during service inspection.
1-1 Cautions during disassembling and assembling
1. This equipment contains parts under high voltage. When making repairs, etc.
Be sure to pull out the power plug beforehand to insure safety.
2. Parts may be very hot immediately after use.
Make sure the equipment has cooled off sufficiently before carrying out repairs.
3. Make sure that parts and screws and wiring, etc. are returned to their original positions.
Tube, tape and other insulation materials have been used for safety reasons.
The internal wiring has been designed to avoid direct contact with hot parts or parts under
high voltage when using clamps or other tools.
4. The parts used in this device have special safety features such as flame-resistance and
anti-voltage properties. When replacing parts, always use parts supplied from the factory.
5. After finishing operations make sure that all parts and wires have been returned to their
original position and that there has been no deterioration of the area around the location that
was worked on.
6. Be sure to use a grounding strap (wrist band) during repair and inspection.
1-2 Lamp
During current conduction, the lamp is in the high-temperature state. In this case, pay
careful attention because a high voltage is used. When replacing a lamp, replace it after
confirming that the lamp has gotten cold sufficiently.
1-3 Lens
Do not look into a lens during projection. This damages your eyes.
Delta Elec. Inc. HD86
Company Confidential Optoma___________________ Delta________________
5 2009/08/18
1-4 Eye Safety Warnings
1. Avoid staring directly into the projector’s beam of light at all times.
2. Minimize standing facing into the beam.
Keep your back to the beam as much as possible.
3. Ensure that projectors are located out of the line of sight from the screen to the audience;
this ensures that, when presenters look at the audience,
they do not also have to stare at the projector lamp.
5. When projector is used in a classroom, adequately supervise students when
they are asked to point out something on the screen.
6. In order to minimize the lamp power needed,
use room blinds to reduce ambient light levels.
Delta Elec. Inc. HD86
Company Confidential Optoma___________________ Delta________________
6 2009/08/18
2. SPECIFICATIONS
2-1. Summary Specifications
Model HD86 (HT-8601)
Display type TIDMDTypeA,LVDS,12° 0.65inches 1080P
Resolution 1920X1080 Native (16:9) Native
Color Brilliant Color
Projection distance 1.5 meters ~ 7 meters
Projection screen size
35.1” to 205” (overdrive to 300” screen in diagonal)
Digital Zoom x 1.25
Throw ratio (D/W) 1.54 ~ 1.93
Vertical keystone
correction +/- 30 degrees (depend on input signal)
Projection methods Front / Rear-Desktop & Front / Rear-Ceiling
Data compatibility IBM PC or compatibles
(VGA, SVGA, XGA, SXGA,)
SDTV/EDTV/ HDTV 480i/576i, 480p/576p, 720p, 1080i,1080p
Video compatibility NTSC/NTSC 4.43, PAL/PAL-M/PAL-N,SECAM
H-Sync 15, 30 – 91.4 KHz
V-Sync 43 - 87 Hz
Safety certification
FCC (class B), UL/CUL, ICES-003(Class B), CE, TUV-GS, CB report, CCC, EK, PSB
Operation temperature
5°~ 35°C
Dimensions / Weight
430 mm (W) x 164 mm (H) x 360 mm (D) / 15lb
AC Input
AC Universal 110 ~ 240 @50~60Hz , Typical @110 VAC (100~240)/±10%
Power consumption
Typical 370W (normal mode)
Stand By
< 1 watts @ 110Vac / 60Hz
Lamp
E20.9 / 280W
Audio speaker
No
PC
VGA in (Compatible with SCART)
Composite video (RCA X 1), S-Video (DIN)
Video
Component, RCAx3 (G/B/R)
Digital
HDMI x 3
Trigger
12V A / 12V B
Delta Elec. Inc. HD86
Company Confidential Optoma___________________ Delta________________
7 2009/08/18
2-2.DMD Specifications
Unit Min.
Max
. Typical Notes
DMD type TI 0.65" 1080p 12 deg LVDS
Type A
Number of Columns Pixel 1920
Number of Rows Pixel 1080
Panel Operating Temp.
℃
10 65
Ambient Temp
℃
25
2-3.Color Wheel
Spec. Unit Min. Max. Typical Notes
Color Segment RGBRGB
65/60/55/65/60/55 (55mm)
2-4. Lamp
Description
Vendor OSRAM
Type E20.9 280W
Standard Mode , TBD Hours Standard @ 180W, 50% Survival Rate
Lamp Life ECO Mode , TBD Hours Typical @ 160W, 50% Survival Rate
Normal: 280W±3%@Vo from 50V to 120V
Lamp Power ECO: 230W±3%@Vo from 50V to 120V
2-5. Terminal connectors
Input
Digital HDMI x 3
Analog RGB HD-15 x 1
Composite RCA x 1 (Yellow)
S-Video mini dim x 1
Component RCA x 3 (G/B/R)
Control
RS-232 DSUB-9 x 1
DC out (screen trigger) DC Jack x 2 (12V±10
％
; 200mA)
Keyboard Emulation Control USB connector type B
Delta Elec. Inc. HD86
Company Confidential Optoma___________________ Delta________________
8 2009/08/18
2-6. Main Unit View
1. Lens Shift Adjustment Cover
2. IR Receiver
3. TiIt-Adjustment Feet
4. Lamp RepIacement Cover
5. Zoom
6. Focus
7. VerticaI and HorizontaI Lens Shift Adjustment ControI and Lens Release
8. Backup Remote Tray
9. LED Indicators
10. Power Button
11. Connection Ports
Delta Elec. Inc. HD86
Company Confidential Optoma___________________ Delta________________
9 2009/08/18
2-7. I/O Ports Illustration about Projector
1. Composite Video
2. Component Video
3. HDMI 1
4. HDMI 2
5. HDMI 3
6. USB B-Type (Service connector)
7. Backup Remote Tray
8. IR Receiver
9. Power Button
10. LED Indicators
11. 12V OUT B
12. 12V OUT A
13. RS232
14. Power Socket
15. Main Power Switch
16. S-Video
17. VGA Input
18. Kensington MicrosaverTM Lock Port
Note:
If your video equipment has both S-VIDEO and RCA jacks (composite video) connect to the
S-VIDEO connector. S-VIDEO provides a better quality signal
Delta Elec. Inc. HD86
Company Confidential Optoma___________________ Delta________________
10 2009/08/18
2-8. Remote Control Parts
Remote Control
1. Power On
2. Power Off
3. Pure Engine
4. Brite Mode
5. Advanced
6. Four Directional Select Keys
7. Mode
8. Edge Mask
9. 12V OUT A On/Off
10. Re-Sync
11. VGA
12. HDMI 3
13. Video
14. HDMI 2
15. S-Video
16. Native
17. YPbPr
18. HDMI 1
19. 16:9
20. 4:3
21. Letter-Box
22. Overscan
23. Menu
24. Enter
25. Color
26. Dynamic BIack
27. Contrast
28. Brightness
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Optoma Projecteur
Optoma
Optoma TX783L Manuel utilisateur
Optoma
Optoma Optoma ThemeScene H77 Manuel utilisateur
Optoma
Optoma EP7150 Manuel utilisateur
Optoma
Optoma H55 Manuel utilisateur
Optoma
Optoma TS725 Manuel utilisateur
Optoma
Optoma PRO360W Manuel utilisateur
Optoma
Optoma X515ST Manuel utilisateur
Optoma
Optoma EX550 Manuel utilisateur
Optoma
Optoma GT200 Manuel utilisateur
Optoma
Optoma H31 Manuel utilisateur
Optoma
Optoma EP737 Manuel utilisateur
Optoma
Optoma EP720 Family Manuel utilisateur
Optoma
Optoma OP1500 Manuel utilisateur
Optoma
Optoma HD81-LV Manuel utilisateur
Optoma
Optoma EP749 Manuel utilisateur
Optoma
Optoma GT200 Manuel utilisateur
Optoma
Optoma EH320USTi Manuel utilisateur
Optoma
Optoma ES522 Manuel d'instructions
Optoma
Optoma ML550 Manuel utilisateur
Optoma
Optoma W307UST Manuel du propriétaire
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
