Optoma FHDQ130 Manuel utilisateur
Page 1 of 64
FHDQ130
Fully optimised 130" all-in-one (AIO) QUAD LED display
Operation Manual
2019.11
Document version 1.70
Page 2 of 64
TABLE OF CONTENTS
Important Safety Notice 4
Installation/Use Precautions of AIO Products 5
Accessories Supplied 6
Spare Parts 7
Parts and Functions 8
Interface Specifications 8
Remote Controller 9
Assembly 10
Component Placement 10
Intelligent Modules 11
Installation 12
Floor Stand 12
Wall Mount 13
Hanging 15
How to Mount and Dismount Intelligent Module 16
How to Assemble the Main Body 18
How to Split the Main Body into two parts 21
Packaging 24
Electrical 25
Circuit protection 25
Earth leakage considerations 25
Inrush-current and over-current considerations 25
Earthing 25
FCC Statement 25
EMC Statement 25
AC Power 26
DC Power 26
Settings 27
Software Installation 27
Software Settings 29
USB/WIFI/LAN Connection Settings 32
Basic Settings 42
Program Editing 44
Main Toolbar 44
Right-Click Menu of the Play Page 44
Program Edit Toolbar 45
Play File of Program 45
Page 3 of 64
Program Structure 45
Program Page 46
Program Window 47
Program Edit Process 48
Async Content Editing 48
Publish Programs through USB/WIFI/LAN 49
Publish Programs through USB disk 49
Sync Playing 51
Network and Management 52
Connection and Management 52
Add Group and Device 52
APP Operation Instructions 53
System Overview 53
APP Installation Instructions 53
APP Operating Instructions 53
Search Terminals 54
Terminal Control 54
Edit Program 56
Version Information 58
Appendix 59
A Specifications 59
B Procedure for Intelligent Module Replacement 61
C Troubleshooting Guide 61
D Mechanical Assembly 62
E RS232 Commands 64
F WiFi Hotspot SSID and Password 64
Page 4 of 64
Important Safety Notice
CAUTION
ATTENTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
▪Always ensure that the unit is properly earthed and power connections correctly made.
▪This equipment must be supplied from a power system providing a protective earth connection and having a
neutral connection, which can be reliably identified.
▪The power outlet supplying power to the unit should be close to the unit and easily accessible.
▪Ensure whole system power off before connect or disconnect the network cable.
▪Do not handle the power supply plug with wet hands.
▪Do not place the display on sloped or unstable surfaces, otherwise it may fall off or tip over.
▪Do not place any objects on top of the display.
▪No naked flame sources, such as lighted candles.
▪To prevent electric shock , do not remove cover.
▪No user serviceable parts inside. Refer servicing to qualified service personnel.
▪Don’t grab the four corners of display (after finishing assembling) when you want to move it from the floor, or
the display will become deformed and affect the alignment. You need to erect it up and move it.
▪Don’t grab any sheet metal of the display when you assemble the display, otherwise the sheet metal will
become deformed and affect the flatness .You can only catch the reinforcing rib.
Page 5 of 64
Installation/Use Precautions of FHDQ130 Products
The interior design of FHDQ130 LED display screen is very sophisticated, but it basically has no dustproof/waterproof
capability, please follow the following precautions during installation and use.
1) Screen storage/working environment requirements
Storage temperature：-10~50℃；Relative humidity：10%~60%;
Working temperature：0~40℃；Relative humidity：10%~60%.
2) Installation requirements
When looking to install an AIO please ensure that suitable area is located avoiding places of high condensation and
humidity( must be less than 60%non-condensation state). It is recommended to install dehumidifier in the
environment to control humidity.
3) Cleaning requirements
During the use of the screen, if there is any accumulation of dust on the surface, it is necessary to use anti-static soft
bristle brush or dust-free cloth to clean the screen. Please be careful in the cleaning process to avoid bumping and
damaging the LED. Do not use a damp cloth to scrub the screen.
4) Usage requirements
The LED screen is recommended to be turned on frequently. For the display screen or module that has been stored for
more than 3 days (including), the method of gradually increasing brightness should be adopted to remove accumulated
moisture by slowly heating, so as to avoid the abnormal quality such as dimming and dead lights caused by expansion
of moisture or moisture and electronic migration in the LED lamp during instantaneous high temperature.
Page 6 of 64
Accessories Supplied
Item
Description
Photo
Qty.
1
AC Power Cable
14S-0GE16A-PZ-PF
1
2
AC Power Cable
14S-0UL20A-PZ-PF
1
3
AC Power Cable
14S-0BS13A-PZ-PF(Assembled)
1
4
M10 Large-headed
Screw
600-W32M10-20-PF
10
5
Magnetic Tool
420-MAG130-A7-PF
1
6
M4x10 Flat Head Screw
600-FM0410-DC-PF
24
7
M10X16 Screw
600-HM1015-S0-PF
12
8
M8x60 Expansion Screw 600-
FM0860-10-PF
32
9
M4x10 Screw(with plain and
spring washer)
60S-WM0409-DC-PF
11
10
M10 Flat Washer
630-102302-S0-PF
12
11
M10 Spring Washer
631-101526-S0-PF
12
12
M4x12mm Screw
60S-WM0412-S0-PF
8
13
Hang Plate
420-TV1212-1A-PF
2
14
Mounting Plate
420-TV1212-21-PF
2
Page 7 of 64
15
Mounting Brace
420-TV1212-31-PF
1
16
USB Flash Disk
333-DISK8G-00-PF
1
17
Screwdriver
690-A25SDR-10-PF
1
18
T-Hand Hex Key
690-DEM050-1A-PF
1
19
Screwdriver
690-A15PBT-10-PF
1
20
Infrared Remote Controller
898-IRC001-00-PF
1
21
WIFI Dongle
898-00WUSB-00-PF
1
22
Anti-static Gloves
690-ASHAND-20-PF
4
23
Cordless Anti-static Wristband
690-ASWA15-00-PF
4
24
EPE FOAM
540-A130BT-10/20-PF
4+1
25
Accessories Check List
1
Spare Parts
Item
Description
Photo
Qty.
1
Intelligent Module
0-AM4-01G090FFEA-02P
3
2
M4x10 Flat Head Screw
600-FM0410-DC-PF
24
3
M4x10 Screw(with plain
and spring washer)
60S-WM0409-DC-PF
11
Page 8 of 64
Parts and Functions
◆Interface Specifications
Access
SPECIFICATIONS
HDBaseT input
Qty : 1
LAN
Qty : 1
Panel Control: Telnet
3G-SDI
Qty : 1
RS232
Qty : 1
Purpose : External Control (AMX)
VGA input
Qty : 1
Analog
Audio Output
Qty : 1 / stereo output 1/8″(3.5mm)TRS
HDMI input
Qty : 2
HDMI : 1.4a
USB 3.0
Qty : 1
Purpose : Provide 5V Power or Image Processor FW upgrade only
USB 2.0
Qty : 2
Purpose : support external USB disc storage (128G in maximum) or communication equipment
or wifi dongle
USB Type B
Qty : 1
Purpose : (Service use)
Button
4 keys.
Power on / Source/ Brightness + / Brightness -
LED indicator
Solid red = Standby
Blinking green = Warm up
Solid green = Normal operation
Blink green / red alternately = Transfer / update data
Fast blinking green = Remove USB
Fast blinking green / red = Firmware update
Page 9 of 64
Remote Controller
Page 10 of 64
Assembly
Each FHDQ130 LED display is designed to be mounted with a specific fixing structure. Please refer to the Mechanical
Assembly (Appendix E) for the detail dimensions.
The list in table 1 is the main components of an FHDQ130 LED display. The intelligent modules are mounted to the
front surface and the other main component locations are shown in Figure 1.
Item
Description
Qty
1
Intelligent Module
144
2
IR Receiver Board
1
3
Power and Mini Card Convertor Board(2in1)
72
4
Signal Control Board
1
5
Main Power Board
1
6
PV7 Board
1
7
System Control Board
1
8
System Core Board
72
9
4.2V /189W Switched Mode Power Supply
24
10
12V /200W Switched Mode Power Supply
1
11
EMI Filter
1
◆Component Placement
There are seven kinds of system board worked for the LED display, IR Receiver Board, Power and Mini Card Convertor
Board, Signal Control Board, Main Power Board, PV7 Board ,System Control Board and System Core Board. Please refer
to the description for each board in the follow sections.
FHDQ130 LED display is combined with intelligent module and case. The intelligent modules and case are fixed by
magnetic structure.
Table 1 - Major components of FHDQ130 LED display
Note: The PSU output is adjustable, the actual value would subject to the label of manufacturing data
Figure 1 FHDQ130 Components
PSU 189W/4.2V
Signal Control
Board
PV7 Board
Power and Mini Card Convertor Board
(2in1)
PSU 200W/12V
System Control Board
Autres manuels pour FHDQ130
1
Table des matières
Autres manuels Optoma Moniteur
Optoma
Optoma FHDQ163 Manuel utilisateur
Optoma
Optoma Creative Touch 3 Series Manuel utilisateur
Optoma
Optoma 3 Series Manuel utilisateur
Optoma
Optoma Pi500 Manuel utilisateur
Optoma
Optoma PanoView PV752A Manuel utilisateur
Optoma
Optoma PanoView PV632AT Manuel utilisateur
Optoma
Optoma FHDS130 Manuel utilisateur
Optoma
Optoma FHDQ130 Manuel utilisateur
