Thank you for purchasing an OptiSource MultiMeter, The
all-in-one: UV meter, Visible Light meter and Photochromic
Lens Demonstrator.
IMPORTANT: Please report any broken, damaged or missing parts
immediately. To start, insert the enclosed power cord into the back
of the MultiMeter and plug into any power outlet.
Warning: MultiMeter uses UV emitting bulbs. Do not look directly
into light source. Do not operate without the black UV diode box
afxed to the top of the box.
Electric Specication: Input = 6 volts @ 2 amps. Works in any 110V
outlet. Power adapter supplied must be used. Use of any other
power adapter cord will void the warrantly.
Your MultiMeter has a one year warranty on all parts and
materials. This warranty will be void if the unit has been:
in contact with water or liquid, tampered with,
disasembled, misused, dropped, used with a power
adapter cord not supplied by OptiSource, used for other
purposed than specied, or any other act that would
normally destroy or cause the unit to not function.
For repairs, call OptiSource to receive instructions.
DO NOT send unit back without a RMA number.
1. When pressing any button on the MultiMeter, hold it
down for 1 second.
2. Whenever “READY...” is displayed on the LCD screen,
pressing a MODE button will be necessary.
3. If the MultiMeter fails to automatically calibrate to
100%, simply press the CALIBRATE button on time.
4. To switch from one MODE to another MODE, press the
desired MODE button breiy two times.
TIPS:
WARRANTY
