OPTI Kinetics Opti Aura Manuel utilisateur
Product Manual
Designed and Manufactured in the UK by Optikinetics
Switching On/Switching Off
Dimming the Image
Using the Timer
Using the App
Contents
Product Overview
Getting Started
Mounting the Projector
Inserting the Effect Wheel
Focusing the Image
Cleaning the Focussing Lens
Operating the Projector
Safety Instructions
Additional Accessories
Guarantee
6
7
7
8
1
2
2
3
5
5
6
11
12
12
.................................................................
......................................................................
..........................................................
....................................................
.............................................................
................................................
.......................................................
..................................................
...............................................................
.....................................................................
........................................................................
...............................................................
.......................................................
...............................................................................
Aura
Designed and Manufactured in the UK by Optikinetics
1
Designed and Manufactured in the UK by Optikinetics
Aura
1x [OPTI] Aura LED Projector
1x External Power Supply E149474 or BSEN61558
1x Effect Wheel*
1x Table Stand
1x Wall Mount (with fixtures and fittings)
Power Rating : 6W
Operating Voltage : 5V DC
Input Voltage & Current: 240V or 115V, 7.5 mA
Product Size: 20 x 20 x 20 cm / 8” x 8” x 8”
Product Weight: 889g / 31 oz (2 lbs)
Packed Product Size: 30 x 30 x 26 cm / 12” x 12” x 10”
Packed Product Weight: 2kg / 4.5 lbs
*Effect Wheel Varies.
Product Overview
The [OPTI] Aura LED is an ideal home sensory projector with Wi-Fi
Connectivity, a dimmer function and off timer capabilities.
Packed Box Contents:
2
Designed and Manufactured in the UK by Optikinetics
Getting Started
Mounting the Projector
The projector can be mounted using the
provided table stand (foam ring) or wall
mount.
The wall mount should be screwed to a wall in a vertical position so
that it supports the bottom and top of the projector. Fixtures and ttings
are provided.
Note:
When wall mounting, the safety cord
should be tted to the projector. To
do this, attach the spring clip on the
safety cord onto the side of the
projector as per the image left.
Aura
Bossed Push On Effect Wheels
For this projector Optikinetics recommends that customers use
magnetic wheels. The [OPTI] Aura does also allow the use of bossed
push on wheels. To use these wheels you will be required to remove
the magnetic adapter from the projector. To do this, use the small allen
key provided and place this in the hole on top of the magnetic adapter.
Twist the allen key counter-clockwise and the adapter will loosen and
detatch from the projector.
You may have to turn on the projector
to move the rotator. The hole on the
top of the magnetic adaptor must
face the top of the projector.
To reattach the magnetic adapter, make sure that the at of the shaft is
facing the top of the projector. Place the magnetic adaptor onto the
shaft and twist the allen key clockwise in the hole on the magnetic
adaptor. The adaptor will subsequently tighten and attach to the
projector.
Note:
3
Designed and Manufactured in the UK by Optikinetics
Aura
Position the magnetic wheel onto the
magnetic adaptor on the projector.
To remove the wheel simply lift it off.
Inserting the Effect Wheel
To attach glass bossed effect wheels
such as liquid wheels, tighten the cross
headed screw on the shaft of the wheel
rotator as per the image left.
To attach plastic bossed push-on effect
wheels, simply push the wheels onto
the shaft of the wheel rotator as per the
image left.
Note:
A slight twist when attaching the plastic bossed push-on effect wheel
will help.
4
Designed and Manufactured in the UK by Optikinetics
Aura
Note:
To detach a bossed push-on wheel, unscrew the wheel if need be
and make sure the wheel is vertical and straight. Then use both
hands to pull the wheel off the shaft.
The screw needs to be aligned to the flat side of the shaft.
The [OPTI] Aura projects a moving image of any size, however it
is recommended that the maximum image projected is 4m/13"
in diameter. An image can be projected onto any medium. For
best results, use the projector in a dark environment.
Cleaning the Focussing Lens
Use a soft tissue or lens cloth with a
little methylated spirit or pure alcohol.
Focussing the Image
The [OPTI] Aura projector uses the same projection lens as
Optikinetics' larger projectors [OPTI] 100 LED, [OPTI] Solar 250 LED
and [OPTI] Solar Sensory LED. This means that the quality of the
image will be the same as those in any sensory room.
To focus the projected effect, twist the
slide on the lens forward and
backwards until your desired focus is
achieved.
5
Designed and Manufactured in the UK by Optikinetics
Aura
Operating the Projector
Switching On/Switching Off
To turn the projector on simply connect
the power supply cable to the inlet
socket on the right hand side of the
projector. The projector will turn on as
you power up the projector.
If you leave the projector on standby, the next time you turn the
projector on without the app, press the 'DIM - OFF - TIMER' button
above the inlet socket.
To turn the projector off without the app, press and hold the 'DIM - OFF
- TIMER' button until the light turns off.
DIM - OFF - TIMER
9V AC 750Ma CE
6
Designed and Manufactured in the UK by Optikinetics
Aura
Dimming the Image
The projector has a bright dimmable light that is perfect in a bedroom.
To dim the image without the app, press and hold down the 'DIM - OFF
- TIMER' button until you reach your desired light output level.
Note:
It may take up to 15 minutes for liquid wheels to start to work as
they contain oil that will ow freely once heated. This heat will
come from the projector.
Using the Timer
Utilising the timer is ideal for those who want to automatically turn the
projector off after a certain time unsupervised.
Turn on the projector and wait 10 seconds. To start the timer double
click the 'DIM - OFF - TIMER' button. To indicate the timer starting, the
projected light will icker. The timer automatically sets to 30 minutes,
dims down then turns off. The timer settings can be varied and set to
up to 60 minutes by using the projectors app.
7
Designed and Manufactured in the UK by Optikinetics
Aura
Using the App
The 'Opti Aura' App has been created free of charge to allow users to
control the [OPTI] Aura projector remotely. The app is available on
IOS and Android platforms and can be downloaded from the App
Store or by Google Play. Alternatively you can visit our website
www.optikinetics.co.uk
Aura Conguration
1.
2.
3.
4.
8
Designed and Manufactured in the UK by Optikinetics
Aura
Ensure the [OPTI] Aura is switched on.
Using the networking app on your mobile device, connect to
the projectors Wi-Fi hotspot. The SSID (the name of the network)
for any [OPTI] Aura projector will start with AURA and be followed
by numbers & letters. For example: AURA907C4B (please note
that on iOS, auto-join and auto-login features need to be turned off)
Open the 'Opti Aura' App on the same device.
Click on 'Discover' page of the App. Wait until the projector's I.P
address appears on one of the buttons (this may take a little
time), then click on this I.P address button to select this
projector.
The mobile device is now connected to the [OPTI] Aura.
Click on the configure page of the App.
Insert the SSID and Password of your home wireless router. This
information is usually written on a label on the router.
Press the Update button. This then transfers the connection of
the [OPTI] Aura to your home network.
Close the App.
Re-connect your mobile device to your normal home network.
5.
6.
7.
8.
9.
10.
The [OPTI] Aura Projector should be configured to be part of your
home network. This configuration process uses the [OPTI] Aura’s
own built-in WiFi hotspot and only needs to be done once.
If there is no home network, it is possible to directly control the
[OPTI] Aura via its own Wi-Fi hotspot. Just follow the instructions
above, skipping steps 6 to 10.
Table des matières
Autres manuels OPTI Kinetics Projecteur
OPTI Kinetics
OPTI Kinetics GOBO 40 Manuel utilisateur
OPTI Kinetics
OPTI Kinetics Solar 250 LED Manuel utilisateur
OPTI Kinetics
OPTI Kinetics Solar 250 Manuel utilisateur
OPTI Kinetics
OPTI Kinetics OPTI Manuel utilisateur
OPTI Kinetics
OPTI Kinetics Kino Manuel utilisateur
OPTI Kinetics
OPTI Kinetics OPTI Solar Sensory LED Manuel utilisateur
OPTI Kinetics
OPTI Kinetics Solar 100 LED Manuel utilisateur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
