Opencockpits BREAKERF Mode d’emploi
www.opencockpits.com
Manual de Instalación y uso
Installation &user`s Manual
BREAKERS
Introducción /Introduction
Los Breakers son interruptores automáticos que protegen los circuitos
eléctricos o sistemas del avión y que saltan una vez se alcanza un umbral
programado. Nuestros breakers están fabricados en plástico inyectado, lo
que confiere al producto una gran calidad y acabado, ademas de
proporcionar una máxima resistencia en las condiciones más extremas.
Presentan compatibilidad con paneles de aviación reales, tarjetas de
Opencockpits u otras. La grabación de los tapones se realizan por laser,
consiguiendo una gran durabilidad y una mayor resistencia al uso.
De esta manera, si disponemos de un software simulador que soporte
dichas funciones, podremos manejar el avión como si del real se
tratara.
Breakers are circuit breakers that protect the aircraft's electrical circuits
or systems and that trip once a programmed threshold is reached. Our
breakers are made of injected plastic, which gives the product a high
quality and finish, in addition to providing maximum resistance in the
most extreme conditions.
They present compatibility with real aviation panels, Opencockpits cards
or others. The engraving of the caps is carried out by laser, achieving
great durability and greater resistance to use.
In this way, if we have a simulator software that supports these
functions, we will be able to handle the plane as if it were the real one.
Datos técnicos / Technical data
Especificaciones / Specifications:
Rango de funcionamiento de 12V a 17V.
Operating range from 12V to 17V.
Salida tipo ON-OFF para el interruptor.
ON-OFF type output for the switch.
Fabricados en plástico inyectado.
Made of injected plastic.
Compatibles con tarjetas de Opencockpits [2T13], [2T14], [2T3],
[2T1], [3T5] u otros fabricantes.
Compatible with the Opencockpits cards [2T13], [2T14], [2T3],
[2T1], [3T5] or others manufacturers.
Fusible automático con conexión y desconexión manual.
Automatic fuse with manual connection and disconnection.
Grabación en láser de las leyendas de los tapones.
Laser engraving of cap legends.
Aspecto y medidas / Appearance, Measurements:
Medidas (Measure): 60,0x27,0x15,0mm .
Peso (Weight): 23 gr.
Descripción / Description:
Nota: Todos los componentes del modulo y su funcionamiento, están
supeditados al modelo de panel y al avión y/o add-on que se use.
Note: All the components of this module and their operation are subject
to the module model and the plane and/ or add-on used.
1. Interruptor activado / Activated switch.
2. Posición normal / Normal position
Puesta en marcha / Start up:
Dentro del catálogo de tarjetas IOCards de Opencockpits, podemos
encontrar varias compatibles con el uso de los breakers. En este manual
vamos a detallar la conexión de breakers con la tarjeta USB Rele [2T14]
con el esquema USB Expansion [2T3] y Master Card [2T1], usando la Relé
[2T14] como tarjeta única y en red (dos tarjetas Relé).
Within the Opencockpits IOCards catalog, we can find several compatible
with the use of breakers. In this manual we are going to detail the
connection of breakers with the USB Relay card [2T14] with the USB
Expansion [2T3] and Master Card [2T1], using Relay [2T14] as a single
card and in network schema (two Relay Card).
RELAY CARD
[2T14]
Db9
Master Card Pin 1
to Relay Card Db9 Pin 1
MASTER CARD
[2T1]
EXPANSION CARD
[2T3]
INPUT
CONNECTION
[3T5]
BreakerBreaker
RELAY CARD
[2T14]
Breaker Breaker Breaker
12V-17V
Power Source
12V GND
Power Source
Db9
Master Card Pin 1
toRelay CardDb9Pin1
INPUT
CONNECTION
[3T5]
RELAY CARD
[2T14]
Db9
Master Card Pin 1
to Relay Card Db9Pin1
MASTER CARD
[2T1]
EXPANSION CARD
[2T3]
INPUT
CONNECTION
[3T5]
RELAY CARD
[2T14]
MASTER CARD
[2T1]
Db9
Master Card Pin 1
to Relay Card Db9Pin1
RELAY CARD
[2T14]
Breaker Breaker Breaker Breaker Breaker
12V-17V
Power Source
INPUT
CONNECTION
[3T5]
Db9
Master Card Pin 1
to Relay Card Db9 Pin 1
Breaker Breaker Breaker Breaker Breaker
7 files x 7 rows
RELAY CARD
[2T14]
Db9
Master Card Pin 1
to Relay Card Db9 Pin 1
12V-17V GND
Power Source
INPUT
CONNECTION
[3T5]
Chequeo / Check
Se requiere el uso del software Sioc. Sioc está disponible en la página
de tienda de Opencockpits, en la pestaña “Soporte – Software”.
The use of Sioc software is required. Sioc is available on the
Opencockpits store page, under the "Support - Software" tab.
Table des matières
Autres manuels Opencockpits Changer
Opencockpits
Opencockpits A320 Sidestick PRO Mode d’emploi
Opencockpits
Opencockpits A320 Sidestick PRO Mode d’emploi
Opencockpits
Opencockpits B737 Wet Compass Mode d’emploi
Opencockpits
Opencockpits AFT A320 Mode d’emploi
Opencockpits
Opencockpits IOSSEAT Mode d’emploi
Opencockpits
Opencockpits B737 Mode d’emploi
Opencockpits
Opencockpits A320 Wet Compass Mode d’emploi
