©Semiconductor Components Industries, LLC, 2021
July, 2021 − Rev. 0 1Publication Order Number:
EVBUM2803/D
RSL10 Smart Shot Color
Camera Evaluation Board
User's Manual
Event−Triggered AI Imaging Platform,
Bluetooth)Low Energy Enabled
EVBUM2803/D
Description
The RSL10 Smart Shot Color Camera
(SECO−RSL10−CAM−COLOR−GEVK) is a complete
ultra−low−power, event−triggered, node−to−cloud platform
that enables smart image capture for portable, low duty cycle
IoT applications including asset monitoring and
event−triggered cameras. Based on the RSL10 SIP and the
ARX3A0 CMOS image sensor (Color and Mono), the
platform features multiple trigger modes including periodic
intervals, motion detection, and environmental sensor
triggers (e.g., changes in temperature and humidity).
The camera kit includes the following components:
•Baseboard PCB
•ARX3A0 Color 121°DFOV IAS Module
(IAS1MOD−ARX3A0CSSC090110−GEVB)·
•ARX3A0 Mono 121°DFOV IAS Module
(IAS1MOD−ARX3A0CSSM090110−GEVB)·
•Micro USB Cable
By default, the color ARX3A0 IAS module is mounted
onto the PCB. To use the mono IAS module, swap the
module onto the baseboard PCB. The firmware supports
both module, and is capable of automatically identifying the
modules.
The RSL10 SIP serves as the processing hub of the
camera, and Bluetooth®Low Energy (Bluetooth LE)
connectivity enabling remote control and transfer of
captured image and sensor data to the provided RSL10 Smart
Shot mobile app (available on GooglePlayt, iOS®).
The mobile app is used to control the camera via BLE
interface, set trigger conditions for events, capture and store
the images captured by the camera, and finally act as a
gateway to provide node−to−cloud connectivity. Connected
to an Image Analytics/AI engine, located in the cloud, the
app is capable of detecting and identifying objects using an
AI cloud service. The mobile application returns the
captured image, along with the list of identified objects and
confidence levels.
The compact design form−factor of the camera can be
used for developing compact cameras with 360 fps mono
imaging based on the ARX3A0 CMOS image sensor.
ARX3A0 offers high sensitivity at both visible and NIR
wavelength, and has a super low power mode that consumes
3.2 mW when active. Additionally, ARX3A0 can be
programmed to monitor specific zones of its field of view,
automatically taking an image when the scene’s contents
change. Embedded on the platform hardware, the
SPCV1100A from SunplusIT®provides multiple color
processing features and JPEG image compression.
The impressive ultra−low−power operation of the RSL10
SIP and ARX3A0 is complemented by a dedicated
FAN53880 Power Management IC (PMIC) and additional
smart power management modes implemented in hardware.
Other devices enabling the efficient power management are
the NCP705 low Iq current linear dropout regulator and the
NCP1421 ultra−Low Iq boost regulator, when camera board
supplied from primary battery. Thanks to these features, the
RSL10 Smart Shot Camera supports an extended battery
lifetime of 5+ years – depending on the specific use case.
Key ON Semiconductor Parts used:
•RSL10 SIP
•IAS1MOD−ARX3A0CSSC090110−GEVB
•IAS1MOD−ARX3A0CSSM090110−GEVB
•LE25U20AQG
•FAN53880
•NCP705
•NCP1421
•NCP3901
•FPF1003A
Applications
•Asset Management
•Smart Home/Buildings
•Smart Agriculture
•Smart Retail
www.onsemi.com
EVAL BOARD USER’S MANUA
