Omron FZ2 Series Manuel utilisateur

Cat. No. Z275-E1-01

FZ2 Series

Vision Sensors

USER'S MANUAL

FZ2 Series User's Manual

Vision Sensor

Rev.A

How This Manual Is Organized

This Manual includes two manuals, "User's Manual", which describes the basic

operations and settings of vision sensors, and "Processing Item List Manual", which

describes the setting options of each processing item.

Conventions Used in This Manual

Symbols

The symbols used in this manual have the following meanings.

Indicates the relevant operational precautions that must be

followed.

Indicates operation-related suggestions from OMRON.

Punctuation Marks

In this manual, Menu, among others, is defined as follows.

[ ] Menu indicates the name of menu or Processing item shown in the menu bar.

" " Item name indicates the item name displayed in the screen.

User's Manual

This manual describes the basic operations and all settings when using vision sensors.

This Manual includes two parts: Operation and Environment Settingas Parts. The

contents are shown as follows.

Operation Part

This part describes how to measure according to the workflow chapter by chapter.

First, prepare to measure by performing "Preparation"g"Design Contents to be

Measurement"g"Set up Contents to be Measurement".

Then, confirm whether or not to measure exactly against the expected objectives by

performing "Measurement Test"g"Adjusting Measurement Contents" repeatly.

Finally, perform "Actual Measurement"g"Verify Measurement Results".

In addition, this part also describes the operations of controller and how to utilize and

analyze the measurement results.

Environment Setting Part

This part describes the measurement environment (camera and lighting, etc.) and the

required system setting and configuration to facilitate the measurement.

In addition, this part also describes the required setting for outputting the measurement

results to external devices and how to store data.

For the Q&A and how to treat the encountered faults, see Appendix. Please read as

required.

User's Manual

Operation Part

This part describes the operation flow from planning to actual measurement and result

verification.

Before Operation

Design

Preparation

Setting up Scene (Measurement Flow)

Test Measurement/Re-measurement/Adjustment

Starting Operation

Utilizing/Analyzing Measured Data

Chapter 1 - Before Operation

This chapter describes fundamental operations and designations of components of this

product.

Operation Flow

Screens/Windows

Input Operation

Inputting a Value

Inputting a Text

Selecting Files and Folders

Operations of ProcItem Setting Window

Setting Figures

Saving Settings and Powering Off

Operation Flow

Here describes the operation flow.

Screens/Windows

The screen varies with the operating state. Some typical interface structures and various

buttons are functionally described hereto.

Main Screen (ADJUST window)

The screen is used for carrying out measurement, from which measurement results can be

verified.

1. Menu bar

To select the menu used for measurement-related operation or setting.

Main Screen Menu

2. "Measurement information display" area

1. Overall judgement

Displays the result of the overall judgement of a scene ([OK]/[NG]).

The judgement result for each processing item is displayed in each flow

unit of the "Control" area.

2. Process time

Displays the time required for the measurement process.

3. Status display

Displays the scene group number, the scene number, the external output

status, and the image mode for the currently displayed content.

3. Toolbar

Some common functions are reserved in Toolbar.

oEdit flow

Displays the Edit Flow window. In the displayed window, you can add,

delete, or edit processing units.

What is Scene

Edit Flow Window

oData save

Setting data is saved into flash memory in the controller. Scene group data

can also be saved to USB memory. Modified settings must be saved.

Saving Setting Data in the Controller's Memory [Data save]

oScene switch

To switch a scene group or a scene.

Changing Steps (Scene Switch)

oMeasure/Stop meas.

Starts/stops measurement. The measurement is performed in accordance

with [Test measurement] settings in the "Control" area.

Test Measurement before Actual Operation

oSwitch to RUN mode

Switches the display to the RUN window.

Edit Flow Window

4. "Image display" area

Displays the measured image.

1. ProcItem setting button

Displays the name of the processing item for the currently selected

processing unit. When tapping the button, the ProcItem Setting window is

displayed.

5. "Control" area

Displays "Test measurement setting", "Flow", "Detail result", and "Image view

setting". You can expand or collapse each item by tapping its panel.

oTest measurement setting

Sets up test measurement or re-measurement using a previously input

image.

Test Measurement before Actual Operation

oFlow

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Omron Accessoires

Omron

Omron ZFV-A25-04 Manuel utilisateur

Omron

Omron ZW-XC7 Manuel utilisateur

Omron

Omron 2JCIE-BL01-P1 Manuel utilisateur

Omron

Omron E2Q2 Manuel utilisateur

Omron

Omron F3S-TGR-SB - Manuel utilisateur

Omron

Omron E3AS-HL150 Series Manuel utilisateur

Omron

Omron F160 Vision Sensor Manuel utilisateur

Omron

Omron ZG2 Series Manuel utilisateur

Omron

Omron E3F2-240VAC Manuel utilisateur

Omron

Omron ZS-HL - Manuel utilisateur

Omron

Omron E2FM - Manuel utilisateur

Omron

Omron XPECTIA FZ3 Manuel utilisateur

Omron

Omron E2EM Manuel utilisateur

Omron

Omron E3ZM-B - Manuel utilisateur

Omron

Omron E3C-LD11 Manuel utilisateur

Omron

Omron SIGMA LINEAR AXIS - Manuel utilisateur

Omron

Omron E3S-G Manuel utilisateur

Omron

Omron Z550 Manuel utilisateur

Omron

Omron ZFX-C Manuel utilisateur

Omron

Omron F3C-AA42-1 Manuel utilisateur

Omron

Omron ZX-E - Manuel utilisateur

Omron

Omron E3ZM - Manuel utilisateur

Omron

Omron ZW-7000 Series Manuel utilisateur

Omron

Omron E3NT-L Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur