Omnimount SC120FM Manuel utilisateur

Max screen size: 42" - 80" (107-203 cm)

Max weight 120 lbs (54.4 kg)

CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!

777-61-062-G-02 rev F

SC120FM

Large Full Motion TV Wall Mount

BEFORE YOU BEGIN

Make sure you have power and signal outlets in the right spot. Now is a great time to check the length of your

cables and make sure they will reach the appropriate outlets. Nothing’s worse than completing a perfect

installation just to realize there’s nowhere to plug in the TV!

Avoid TV glare. Find a mounting location for your TV where there is no glare from surrounding windows or lights.

A great way to check for glare is to have a friend hold a mirror where you intend to hang your TV. Take a seat; if you

can see windows or bright lights in the reection that’ll cause glare on your TV once installed.

After nding a location that works best for you, grab your tools and you’re ready to begin!

Remember, if you’re ever in doubt during this process, watch the installation video online or call our friendly

customer care team at 1.800.MOUNT-IT (800-668-6848).

777-61-062-G-02 rev F

TOOLS NEEDED

WOOD

CONCRETE

Ø 7/32" (5,5 mm)

10mm

Ø 3/8" (9,5-10 mm)

1/2"

CONTENTS

This product is designed to move easily

when mounted to the wall and the weight

of your TV is attached. Movements may be

dicult before your TV is attached.

1x 1x

Part # Description

A Wall Plate

B TV Plate

C VESA Extenders

D Cable Tie

E Wall Template

F Stud Finder/Level

777-61-062-G-02 rev F

CONTENTS

TV Hardware

MOUNT Hardware

ST8 x 65mm M8

4x4x

M4 x 7mm

2x 2x

M4/M5

M6 x 15mm

EXTENDER Hardware

8x8x 8x

M6/M8 x 5mm

M6/M8

M6 x30mm

4x M8 x30mm

M6/M8 x 10mm

M6 x15mm

M8 x15mm

M8 x45mm

QUESTIONS? 1-800-MOUNT-IT (1-800-668-6848)

Disclaimer – OmniMount Systems has extended every eort to ensure to accuracy and completeness of

this manual. However, OmniMount Systems, Inc. does not claim that the information covers all

installation or operational variables. The information contained in this document is subject to change

without notice or obligation of any kind. Regarding the information contained herein, OmniMount Systems,

Inc. makes no representation of warranty, expressed or implied, and assumes no responsibility for accuracy,

suciency, or completeness of the information contained in this document.

WARNING: FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN

RESULT IN SERIOUS PERSONAL INJURY, DAMAGE TO PERSONAL PROPERTY, OR VOIDING OF FACTORY WARRANTY!

It is the responsibility of the installer to ensure all components are properly assembled and installed using the instructions provided. If you do not understand

these instructions or have any questions or concerns, please contact customer service at 1-800-668-6848 or [email protected]. Do not attempt to install

or assemble this product if the product or hardware is damaged or missing. In the event that replacement parts or hardware are needed, please contact

Customer Service at 1-800-668-6848 or [email protected]. International customers needing assistance should contact the Dealer from which they

purchased the product. The included hardware is designed for use on vertical walls constructed of wood studs or solid concrete. A wood stud wall is

dened as consisting of a minimum of 2x4 wooden studs (2" wide by 4" deep) with a maximum of 5/8" drywall. A concrete wall is dened as solid concrete

with a minimum depth of 6" (152 mm). The included hardware is not designed for use with metal studs or cinderblock walls. If you’re uncertain about the

construction of your wall, then please consult a qualied contractor or installer for assistance. For a safe installation, the wall you are mounting to must

support 4 times the weight of the total load. If not, then the surface must be reinforced to meet this standard. The installer is responsible for verifying that

the wall structure and hardware used in any installation method will safely support the total load.

777-61-062-G-02 rev F

WEIGHT / SCREEN SIZE CAPACITY

120 lbs

54.4 kg

USE WITH TVs LARGER THAN THE MAXIMUM WEIGHT AND/OR SCREEN SIZE MAY RESULT IN

INSTABILITY CAUSING POSSIBLE INJURY.

42"- 80"

1. ATTACHING THE TV PLATE TO THE TV

Using a Phillips screw driver attach the TV plate to the TV. Because this mount was designed to t a number of TV congurations,

we’ve included a variety of screws and spacers. You will only be using 4 screws in this installation step. Spacers may be needed to

accommodate TVs with a curved back, recessed mounting locations, or in the event that one of the TV rail obstructs the power or

signal plug outlets. Spacers may also be mounted behind the TV rail to take up additional slack. Now is also an opportune time to

plug in all of your power and signal cables into the TV.

TV Hardware

M6/M8 x 5mm

M6/M8

M6 x30mm

4x M6/M8 x 10mm

M6 x15mm

M8 x30mm

M8 x15mm

4x M8 x45mm

777-61-062-G-02 rev F

NOTE: If the TV plate does not reach the mounting holes on the back of your TV, you will need to install the extenders.

Please see the next page for the extender installation.

ATTENTION: If your AV access is obstructed the

at panel plate is designed for vertical adjustment

with 100mm x 100mm hole patterns.

EXTENDER INSTALLATION

These extenders will allow you to mount TV’s with up to a 600mm x 400mm

hole pattern. Attach each extender to the TV plate using shown hardware.

Once this step is complete, refer to the previous step for attaching the TV

plate to the TV.

M6 x 15mm

EXTENDER Hardware

8x 8x

Table des matières

Autres manuels Omnimount Support et étagère

Omnimount

Omnimount OC150T Manuel utilisateur

Omnimount

Omnimount OC175T Manuel utilisateur

Omnimount

Omnimount OS50F Manuel utilisateur

Omnimount

Omnimount OMNI 25.0C Manuel utilisateur

Omnimount

Omnimount OC40F Manuel utilisateur

Omnimount

Omnimount CL-S Manuel utilisateur

Omnimount

Omnimount OM1100595 Manuel utilisateur

Omnimount

Omnimount OE150FM Manuel utilisateur

Omnimount

Omnimount 10135 Manuel utilisateur

Omnimount

Omnimount Modena 55FP Manuel utilisateur

Omnimount

Omnimount OC40FM Manuel utilisateur

Omnimount

Omnimount POWER 40 OM10333 Manuel utilisateur

Omnimount

Omnimount VB100F Manuel utilisateur

Omnimount

Omnimount 75/100-CL Manuel utilisateur

Omnimount

Omnimount 1N1-S Manuel utilisateur

Omnimount

Omnimount PRO-PJT Manuel utilisateur

Omnimount

Omnimount 10238 Manuel utilisateur

Omnimount

Omnimount REO14U Manuel utilisateur

Omnimount

Omnimount OS80T Manuel utilisateur

Omnimount

Omnimount OM10046 Manuel utilisateur

Omnimount

Omnimount OM1004282 Manuel utilisateur

Omnimount

Omnimount OCSBA Manuel utilisateur

Omnimount

Omnimount CI40FML Manuel utilisateur

Omnimount

Omnimount G3FP Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur