OmniBlend I Manuel utilisateur
1
OWNER’S MANUAL
OmniBlend I
OmniBlend (Pty) Ltd
SOUTH AFRICA
www.omniblend.co.za
Read and save these instructions
2
Table of Contents
LET’S GET STARTED 3
SERVICE & REGISTRATION 4
IMPORTANT SAFEGUARDS 5
PARTS & FEATURES 9
ABOUT THE BLADES 12
HOW TO USE THE TAMPER? 13
CONTROL PANEL 15
HINTS FOR SETTING SPEEDS 15
CARE AND CLEANING 17
SPECIFICATIONS 19
3
LET’S GET STARTED
CONGRATULATIONS!
You are about to see how quick, easy, and delicious healthy eating can be! We hope that you’ll find the information in
this step-by-step guide to be useful and beneficial. The possibilities are endless, and we know you will enjoy your new
OmniBlend lifestyle!
Please read all the safety information, warnings, and instructional material found in this booklet before getting started. Set
your OmniBlend machine on a dry, level surface. Make sure that the power switch is set to Off, and that the machine is
plugged into a grounded electrical outlet. Then, follow the cleaning instructions on page 17 to prepare your machine for
use. Always clean your machine before the first use.
4
SERVICE & REGISTRATION
OMNIBLEND SERVICE
Record the serial number of your OmniBlend on the warranty form provided with the machine for future reference. These
numbers can be found on the back of the motor base.
Before returning this product for any reason, including repair, first contact OmniBlend Customer Service at
021 012 5999, email service@omniblend.co.za, or contact your local dealer.
PRODUCT REGISTRATION
Enjoy faster and easier service in the future by taking a few minutes to register your OmniBlend machine today.
Choose one of these 2 easy ways to register your machine:
1. Online at www.omniblend.co.za/pages/product-registration-form
2. Email service@omniblend.co.za
Failure to register your machine will not diminish your warranty rights.
5
IMPORTANT SAFEGUARDS
To avoid the risk of serious injury when using your OmniBlend blender, basic safety precautions should be followed,
including the following.
IMPORTANT INSTRUCTIONS FOR SAFE USE
Do not leave your OmniBlend blender unattended when operating. In case of a technical failure, contact OmniBlend for
any repairs or servicing requirements.
WARNING
Electrical Shock Hazard.
Use grounded outlet only.
DO NOT remove ground.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to follow instructions can cause death or electrical shock.
AUTOMATIC OVERLOAD PROTECTION
Your OmniBlend machine is equipped with a special feature: Automatic Overload Protection. This built-in feature is
designed to protect the motor and prevent your machine from overheating. That means peace of mind for you as an
6
OmniBlend owner. If the Overload Protection kicks in, the machine will stop operating suddenly. Leave the machine to
cool down for 5 to 10 minutes, and then (while the machine is still connected to power), press the Overload Button on the
bottom of the machine. The machine will now work as normal again.
WARNING
To Avoid Injury.
Read and understand instruction manual before using this machine.
READ ALL INSTRUCTIONS AND SAFEGUARDS BEFORE OPERATING BLENDER.
1. Not intended for use by or near children or persons with reduced physical, sensory, or mental capabilities or lack
of experience and knowledge. Close supervision is necessary when any appliance is used by or near children or
incapacitated persons.
2. To protect against the risk of electrical shock, do not put the blender base in water or other liquid.
3. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
4. Avoid contacting moving parts.
7
5. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or
damaged in any manner. Call OmniBlend Customer Service at 021 012 5999 or email
service@omniblend.co.za for examination, repair or replacement.
6. The use of attachments not expressly authorized or sold by OmniBlend for use with this blender, including canning
jars, may cause fire, electric shock, or injury.
7. Do not let cord hang over edge of table or counter. Do not let cord contact hot surface, including the stove.
8. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage
to the blender. A silicon scraper or spatula may be used, but only when the OmniBlend blender is not running.
9. The tamper provided must be used only when the main part of the lid is in place.
10. Blades are sharp. Handle or remove blade and blade assembly from the container with extreme care to avoid
injury. To reduce the risk of injury, never place a blade assembly on the motor base unless assembled to the
OmniBlend container.
11. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in the container as this will damage
the blades and other components when starting the machine and may cause injury.
12. Never attempt to operate with damaged blades.
8
13. Always operate blender with lid and lid plug firmly in place. The lid plug should be removed only when adding
ingredients and when using the tamper.
14. When blending hot liquids or ingredients, use caution; spray or escaping steam may cause scalding and burns.
Fill the jug 1/3 or max ½full. Filling the jug more than halfway can cause too much steam to build up and can
blow the lid off the blender. Remove the lid-plug, and place lid (without the cap) securely on the jug. Cover the
blender lid with a clean kitchen towel, and allow for an easy escape route for the hot steam. Hold the lid
securely, and start blending on lowest speed. Gradually increase speed if needed.
15. When making nut butters or oil-based foods, be cautious of heat. The jug will heat up quicker than with using
liquids. Processing for longer periods can cause dangerous overheating. And can cause damage to the jug.
Leave the jug to cool for 10-15 min, and then continue processing.
9
PARTS & FEATURES
2-Part Lid: your new machine has our latest lid design. It is easy to put on
and take off, and easy to clean. Always use the lid and the lid insert when
the machine is in operation. The 1.5ltr jug has a square lid, the 2ltr jug
has a round lid. Both have lid inserts.
CAUTION: Lids are not interchangeable between different container sizes.
Snap the lid onto the container and leave in place for a few minutes.
Once the lid has been left on the container, it will be much easier to lock
or remove.
Lid Insert: press into the lid. For the 2ltr jug, make sure it is fitted within the
2 little knobs, to avoid it to rotate during blending. Remove the lid insert to
use the tamper or add ingredients.
To lock the lid in place:
1. Position lid on container with sides of the lid between the
container’s inner edges.
2. Push the lid the container’s edges until it locks in place.
The lid must always be secured when processing, especially hot liquids
that may scald.
10
WARNING
Rotating Blades can cause severe injury.
DO NOT reach into container while machine is running.
To Remove the Lid: Press the lid the center, to while holding the container securely.
To Remove the Lid Plug: Rotate the lid plug counterclockwise from the “locked” to “unlocked” position and lift out.
Container: Ounces, cups, and milliliters are clearly marked.
Power Cord: Your machine is equipped with a long power cord. Store the unused portion neatly underneath.
Bottom View / Cord Wrap: Plastic cord retainers hold the cord securely. There is no need to unscrew the cord retainers
to let out more cord.
They are flexible, and return to position after the cord is lifted out.
Automatic Overload Protection: Your OmniBlend motor is designed to protect itself from overheating. If the motor shuts off,
follow these instructions:
For your safety the OmniBlend blenders are equipped with Overload Protection. If the motor shuts off suddenly, leave the
machine to cool down for 5-10 minutes, and then press the black Overload Button on the bottom of the machine.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels OmniBlend Mixer
