Olympus VS120 Manuel utilisateur
User’s Manual
[Simple Operation]
VS120
Virtual Slide System
Notice
This manual describes simple operating procedures so as the person who uses it for the
first time can use with use.
For detail information, refer to [Hardware] of the attached Instructions and [Online Manual]
of software
After reading this manual carefully, keep it in a safe place.
A X 8 0 3 6
CAUTION
Reproduction, copying or duplication of a part or all of this software and manual is prohibited.
Registered Trademarks
Microsoft, Microsoft Windows are registered trademarks of Microsoft Corporation.
Adobe, Adobe Flash Player are registered trademarks of Adobe Systems Incorporated.
Other brand names and product names are trademarks or registered trademarks of their
respective owners.
Contents
Contents
Contents i
1 Acquiring Images 1
1-1 VS120-L100·························································································· 1
1-2 VS120-S5 ··························································································· 11
1-3 VS120-S1 ··························································································· 19
1-4 Setting Focus Logic ········································································· 29
1-5 Changing the Save Location for Acquired Images ······················· 30
2 Databases 31
2-1 Opening Database ············································································ 31
2-2 Registering Images··········································································· 32
2-2-1 2-2-1 Registering Image Files on a Hard Disk Drive ······································ 32
2-2-2 Registering Image Files after Viewing ···························································· 33
2-3 Setting Permission for Images························································ 34
2-4 Viewing Images················································································· 35
3 Using Scan Projects 36
3-1 Saving Scan Projects ······································································· 36
3-2 Roading Scan Projects····································································· 36
Acquiring Images / VS120-L100
1
Page
1 Acquiring Images
1-1 VS120-L100
This section describes how to acquire images of several slide glasses by using the automatic transport function.
For this purpose, the following modes are available:
Quick Batch: It is to acquire images automatically without making precise settings.
When this mode is selected, follow procedures in the sections whitch carry (Quick Batch) marks
on top of the sections.
Expert Batch:It is to acquire images by setting the scanning area (XY) and focus.
When this mode is selected, follow procedures in the sections whitch carry (Expert Batch)
marks on top of the sections.
1 Starting Up the System (Quick Batch) (Expert Batch)
First, turn on the monitor , followed by the
microscope control box , slide loader , and
controller to start up the system.
After the system has started up, double click the
[VS-ASW] icon on the desktop to start up the
software and begin adjustment of the stage.
Acquiring Images / VS120-L100
2 Page
2 Placing a Slide Glass (Quick Batch) (Expert Batch)
Place slide glasses in the cassette.
Before placing slide glasses in the cassette,
wipe the glasses free of dust, etc.
Open the cassette cover of the slide loader.
Place the cassette in the designated part of the
loader.
Close the cassette cover of the slide loader.
1
25
26
50
Acquiring Images / VS120-L100
3
Page
3 Selecting Scan Mode (Quick Batch) (Expert Batch)
Select on the upper right of the screen.
Click or .
After clicking the button, do not open or close
the cassette cover.
The locations where the slide glasses have been
placed are detected.
Acquiring Images / VS120-L100
4 Page
4 Setting Slide Glass Information (Quick Batch) (Expert Batch)
Set information for each slide glass if necessary. It is possible to acquire the image
without setting any information.
Click the slide.
If you do not need to set slide glass information for
the slide, go to step .
Enter slide glass information.
Click to select the next slide.
Repeat steps and for all the slides for
which you need to set slide glass information.
Click .
Acquiring Images / VS120-L100
5
Page
5 Selecting the Objective Lens (Quick Batch) (Expert Batch)
Click the Objective Lens button that you want to
use.
(The check mark appears on the selected
objective lens button.)
To change the optional settings, go to step below.
If you do not need to change the optional settings, go to
step .
To capture the image in Z mode, click (Scan one
Z plane) button and then click [Virtual Z].
For more information, refer to the online help.
If you are using a database, you can set the location for
saving captured images to the hard disk drive (default)
or database.
To save captured images to the database, refer to
Section “1-5 Changing the Save Location for Acquired
Images” (page 30).
Click .
The [More Options] window appears.
Change the necessary settings in the [More
Options] window and click .
Click (Apply settings to all slides of all
cassettes).
The slides to which the settings have been
assigned turns yellow.
Acquiring Images / VS120-L100
6 Page
6 Acquiring an Overview Image (Expert Batch)
When setting is complete, click
.
(The 2x objective lens is used for scanning.)
Avoid movement or vibration of the system
during scanning of overview images.
Autres manuels pour VS120
1
Table des matières
Autres manuels Olympus Microscope
Olympus
Olympus VANOX Manuel utilisateur
Olympus
Olympus SZX7 Manuel utilisateur
Olympus
Olympus X-Tr Mode d'emploi
Olympus
Olympus BHS Manuel utilisateur
Olympus
Olympus BX61WI Manuel utilisateur
Olympus
Olympus VS120 Manuel du propriétaire
Olympus
Olympus SZX9 Manuel utilisateur
Olympus
Olympus AH3 Mode d'emploi
Olympus
Olympus FHT-521 Manuel utilisateur
Olympus
Olympus CKX41 Manuel utilisateur
Olympus
Olympus BX53 Manuel utilisateur
Olympus
Olympus DP71 Manuel utilisateur
Olympus
Olympus IX71 Manuel utilisateur
Olympus
Olympus IX2-RFSPOT Manuel utilisateur
Olympus
Olympus DSX1000 Manuel utilisateur
Olympus
Olympus DP74 Manuel utilisateur
Olympus
Olympus IX71 Manuel utilisateur
Olympus
Olympus MX61 Manuel utilisateur
Olympus
Olympus BX60 Manuel utilisateur
Olympus
Olympus PROVIS AX70 Guide d'installation
Manuels Microscope populaires d'autres marques
VWR
VWR VisiScope 384 Series Manuel utilisateur
Nikon
Nikon ECLIPSE E200 POL Manuel utilisateur
Leica
Leica DI C800 Manuel
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Manuel utilisateur
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Manuel utilisateur
Leica
Leica FL560 Manuel utilisateur