Olympus DP26 Manuel utilisateur
INSTRUCTIONS
DP26
MICROSCOPE DIGITAL CAMERA
This instruction manual is for the Olympus microscope digital camera DP26.
We recommend that you study this manual thoroughly before operating the camera and familiarize
yourself fully with the use of this camera, which is important to ensure the safety, and to obtain optimum
performance.
Retain this instruction manual in an easily accessible place near the work desk for future reference. AX7970
In accordance with European Directive 2002/96/EC on Waste Electrical and Electronic Equip-
ment, this symbol indicates that the product must not be disposed of as unsorted municipal
waste, but should be collected separately.
Refer to your local Olympus distributor in EU for return and/or collection systems available in your
country.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with the requirements of directive 2004/108/EC concerning electromagnetic
compatibility and of directive 2006/95/EC concerning electrical equipment designed for use within
certain voltage limits. CE marking means the conformity to these directives.
For Korea only
B급 기기 (가정용 방송통신기자재)
이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을
목적으로 하며, 모든 지역에서 사용할 수 있습니다.
DP26
1 Intended use ...............................................................................................................................................................................................4
2 Handling Precautions..........................................................................................................................................................................5
3 Maintenance and Storage ..............................................................................................................................................................6
4 Cautions for using ..................................................................................................................................................................................7
5 PC and Software .....................................................................................................................................................................................10
1 SYSTEM CHART ...............................................................................................................................13
2 NOMENCLATURE ............................................................................................................................15
IMPORTANT -- Be sure to read this section for safe use of the equipment. -- 1-12
3 INSTALLATION .....................................................................................................................................16
1 Installing the Camera Head ..........................................................................................................................................................16
2 Connecting the Camera Cable ..................................................................................................................................................18
3 Connecting the AC adapter ..........................................................................................................................................................19
4 IMAGE RECORDING PROCEDURE .................................................................................21
4-1 Software ..............................................................................................................................................................................21
4-2 Image Recording Flow ...........................................................................................................................................22
5 SPECIFICATIONS .............................................................................................................................23
6 TROUBLESHOOTING GUIDE ................................................................................................25
2
The microscope digital camera DP26 is designed to be connected to a camera adapter mounted on an Olympus
UIS2/UIS series microscope for recording of microscopic magnified images.
When the DP26 is used with a camera adapter from other manufacturers than Olympus, the optical performance
may not be fully manifested.
Descriptions in Instruction Manual
This Instruction Manual contains only the descriptions of the microscope digital camera DP26. For procedures to use
the connection kit of the microscope digital camera, refer to the Instruction Manual of the relevant connection kit.
If the equipment is used in a manner not specified by this manual, the safety of the user may be endangered. In
addition, the equipment may also be damaged. Always use the equipment as outlined in this instruction manual.
The following symbols are used to set off text in this instruction manual.
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury or damage to the equipment or other property. It may also be used to
alert against unsafe practices.
} : Indicates commentary (for ease of operation and maintenance).
CAUTION
DP26
IMPORTANT
3
1. Before connecting or disconnecting a connection cable or power cord, make sure that the main switch of the
camera or PC is set to OFF. When connecting a cable or power cord, push in the connector all the way before
pressing the main switch to ON.
2. To avoid electric shock or equipment failure, never connect or disconnect a cable while the main switch is set to
ON.
3. If the main switch of the camera is turned OFF using DP26, PC the application may malfunction. Be sure not to turn
OFF the switch during using DP26.
4. Always use the AC adapter provided by Olympus. Using a similar but non-Olympus AC adapter does not only allow
the camera to manifest its full performance but may also cause an equipment failure as well as a burn or fire hazard
due to abnormal heating. Never use such an AC adapter.
5. The cords and cables are vulnerable to bend or twist. Do not apply excessive force to them. Also distribute the cords
and cables away from a heat-generating part such as the lamp housing of the microscope.
6. To prevent the microscope from toppling down, avoid using microscope attachments that may make the total height
of the microscope above 1 meter when they are attached.
7. The camera head generates heat after they have been used for a long period of time. To avoid moderate
temperature burn, do not leave these parts in extended contact with your skin.
8. Connect the power cord correctly and ensure that the grounding terminals of the power supply and wall outlet
are properly connected. If the equipment is not grounded properly, Olympus can not warrant the electrical safety
performance of the equipment.
9. Sharp edges inside the computer may cut your fingers, so take extra care.
10. Do not permit tools or metal fragments to get into air vents, or other apertures. Doing so could cause failure of the
microscope digital camera DP26 or electric shock to the user.
SAFETY PRECAUTIONS
4
Safety Symbols
The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment
in the safest possible manner.
Symbol Explanation
Indicates that the main switch is ON.
Indicates that the main switch is OFF.
This product is intended to be used for capture of digital images, but not for clinical diagnostic purposes.
1 Intended use
DP26
5
1. The camera head uses precision components. Handle it with care and avoid subjecting it to a sudden or severe
impact. Also note that the camera head does not have a waterproof construction.
2. If the microscope digital camera is used in a manner not specified by this manual, the safety of the user may be
imperiled. In addition, the microscope digital camera may also be damaged. Always use the microscope digital
camera as outlined in this instruction manual.
3. Do not use the camera in areas where it may be subjected to direct sunlight, high temperature and humidity, dust or
vibrations. (For the operating environment conditions, see “SPECIFICATIONS” on page 23.)
4. The image displayed on the monitor may be affected when it is used near equipment generating strong
electromagnetic waves. To avoid interference during operation, keep the system far from any source of
electromagnetic waves.
5. Never set the main switch of the camera to “ \ ” (OFF) or unplug the camera cable or AC adapter during use of the
DP26. Otherwise, the PC application may malfunction.
6. Since we are not responsible for any image data, please be sure to check images, backup or edit the data on your
own.
7. If cables are connected incorrectly, the product may malfunction. Be sure that every unit is connected correctly
before operating the product.
8. For operating the PC, refer to the instruction manual of the PC in use. Pay attention to the precautions and warnings,
etc. in the manual.
2 Handling Precautions
6
1. To clean the lenses and other glass components, simply blow dirt away using a commercially available blower and
wipe gently using a piece of cleaning paper (or clean gauze).
If a lens is stained with fingerprints or oil smudges, wipe it with gauze slightly moistened with commercially available
absolute alcohol.
• Since the absolute alcohol is highly flammable, it must be handled carefully. To prevent fire ignition, be sure
to keep it away from open flames or potential sources of electric sparks -- for example, electrical equipment
that is being switched on or off.
• Also remember to always use these chemicals only in a well-ventilated room.
2. Parts other than the glass components should be cleaned by wiping with a clean cloth. Do not use organic solvents
to remove major stains. Use a soft cloth slightly moistened with a neutral detergent solution.
3. Do not disassemble any part of the camera as this could result in malfunction or reduced performance.
4. Before disposing of this product, be sure to follow the regulations and rules of your local government.
5. When the system is not used, store it with the dust cover. Before storage, ensure that the main switches of the
camera head and the microscope are set to OFF and that the camera head, AC adaptor and lamp housing is cool
enough.
6. When smoking the room for cleaning, etc., move the DP26 to a place not exposed to smoke.
7. Care is required against condensation as this may sometimes cause malfunction. Condensation is the
phenomenon in which the vapor in the air is condensed into water drops, which attach to the surface of a metallic
plate, etc. It often occurs when the ambient temperature changes suddenly, for example when a camera is brought
from cold outdoors into warm indoors.
CAUTION
3 Maintenance and Storage
DP26
7
4 Cautions for using
Image data
The recorded image data may be lost (destroyed) in the following cases. Note that Olympus will not assume any
liabilities for the loss (destruction) of recorded data. The image data may also be destroyed by an unexpected cause. It
is recommended to back up the data periodically.
· When the user or a third party services or repairs the equipment.
· When the PC or control box is shut down, the AC adapter is disconnected or the power cord is unplugged during
recording or erasure (formatting) of the PC or control box.
· In case when continuing to save the data for the period exceeding the life time of data storage of USB memory,
(approx. 1 to several years).
· When the equipment fails.
Please note if following cases may occur though the camera is working properly, the image restoration or the
compensation for damages are not guaranteed.
· The image is abnormal.
· File properties e.g. file names, file time, etc. are abnormal.
· The image is lost.
} In general, as the data retention lifetime is set in the electronic memory media, e.g. USB memory, HDD, CD-R,
DVD-R, etc., the saved files may be lost after several years.
} The image data may be disappeared (destroyed) unexpectedly. Be sure to backup the data on regular base.
} Make sure that there is no problem when acquiring the subjects before acquisition. Please note that even though
the problem may occur caused by the acquired images, Olympus will not be responsible for these problems.
Autres manuels pour DP26
1
Table des matières
Autres manuels Olympus Appareil photo numérique
Olympus
Olympus 226065 - Stylus 820 Digital Camera Manuel utilisateur
Olympus
Olympus u TOUGH-8000 Manuel utilisateur
Olympus
Olympus OM-4 Manuel utilisateur
Olympus
Olympus Camedia D-340R Manuel utilisateur
Olympus
Olympus Stylus M 760 Manuel utilisateur
Olympus
Olympus SZ-15 Manuel utilisateur
Olympus
Olympus STYLUS-5010 Mode d’emploi
Olympus
Olympus X-750 Manuel utilisateur
Olympus
Olympus SP-590 UZ - Digital Camera - Compact Manuel utilisateur
Olympus
Olympus SP-565 UZ Guide de configuration
Olympus
Olympus Stylus 730 Guide d'installation
Olympus
Olympus E-M1 Manuel utilisateur
Olympus
Olympus FE 130 - 5.1MP Digital Camera Manuel utilisateur
Olympus
Olympus FE 120 - Digital Camera - 6.0 Megapixel Manuel utilisateur
Olympus
Olympus E420 - Evolt 10MP Digital SLR Camera Guide de configuration
Olympus
Olympus SP 570 - UZ Digital Camera Guide de configuration
Olympus
Olympus SH-2 Manuel utilisateur
Olympus
Olympus CAMEDIA C-3030ZOOM Guide d'installation
Olympus
Olympus CAMEDIA SP-500 UZ Manuel utilisateur
Olympus
Olympus SH-21 Manuel utilisateur
