Okina SIR42-352AI Guide de démarrage rapide

http://www.okinausa.com R201110-V07

SIR42-352AI

SIR42-352AIP Operational Manual

42 IR Day & Night Weatherproof Color Camera

FEATURES

•1/3” Hi-Res. Sony Super HAD CCD

•520 TV Lines

•42 IR LED

•3.7mm~12.0mm AsphericalAuto Iris Vari-Focal Lens

•IR Distance up to 120ft / 40m

Selectable IR projecting distance design (Hi/Mid/Low)

•0.3 Lux @ F1.6

•External Function Adjustors

•Cable Management Bracket; IP66 Rating

•IR “on”: 350mA(Low) / 410mA(Mid) / 810mA (High)

IR “off”: 250mA

•12V DC

http://www.okinausa.com R201110-V07

Disposal of Old Electrical & Electronic Equipment (Applicable in the

European Union and other European countries with separate collection

systems).

This symbol on the product or on its packaging indicates that this product shall not be

treated as household waste. Instead it shall be handed over to the applicable collection

point for the recycling of electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste

handling of this product. The recycling of materials will help to conserve natural resources.

For more detailed information about recycling of this product, please contact your local city

office, your household waste disposal service or the shop where you purchased the

product.

CAUTION

1. Never point the camera toward the sun

Do not expose the lens directly to the sun or to strong light as this may damage the

pick-up device.

2. Handle this camera with care

Avoid any shock or bumping of the camera. Improper handling could damage the

camera.

3. Requires a proper operating environment

This camera is designed for indoor use. The allowable temperature range for operation

of this camera is between -4°F ~ 122°F / -10°C ~ 50°C.

Please read the Manual before attempting to use this product.

http://www.okinausa.com R201110-V07

4. Clean the front face or lens

It is recommended that the surface be cleaned every 3~6 months. Cleaning should be

done by using a chamois, a very fine soft cloth, lens tissue, or cotton tipped applicator

and ethanol to carefully remove any fingerprint or dust.

5. Check the power source voltage

The power source voltage should be within the specified range. (Camera must meet

the specifications). Camera must be connected to a surge protector at all times.

6. Objects and liquid entry

Never push objects of any kind into this camera as this may touch dangerous voltage

points of short out parts that could result in a fire or electric shock. Never spill any kind

of liquid on the video product.

7. Servicing

Do not attempt to service this video product by yourself as opening or removing covers

may expose you to dangerous voltage or other hazards. Refer all service to qualified

servicing personnel.

8. Damage requiring service

Unplug this video product from the wall outlet and refer service to qualified servicing

personnel under the following conditions:

a. When the power supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the video product.

c. If the video product has been exposed to rain or water.

d. If the video product has been dropped or the cabinet has been damaged.

e. When the video product exhibits a distinct change in performance.

PACKAGE CONTENTS

zOne (1) SIR42-352AI/SIR42-352AIP Camera with power/video cable and sunshield

zOne (1) Allen Wrench

zFour (4) Screws

zFour (4) Wall Anchors

zOne (1) Operational Manual

* For any returns, please include all components listed above with original packaging in

Resalable Condition. Absolutely No Returns will be accepted if any component is

missing/damaged.

http://www.okinausa.com R201110-V07

DIMENSIONS & PARTS FUNCTIONS

INSTALLATION

1. Install Camera

Use the supplied screws and secure the camera in position.

2. Adjust 2-Axis Bracket

Adjust the bracket while checking the view angle from the monitor. Loosen the

X-Y screws and then adjust the 2-Axis bracket (X-YAxis) to get the desired

viewing angle.

http://www.okinausa.com R201110-V07

NOTE: This product is not suitable for horizontal 360° continuous rotation.

3. Focus Adjustment

Focus adjustment should be done with zoom focus at the same time. Use the

screwdriver to adjust the zoom/ focus ratio (from wide to tele or near to far).

NOTE: Focus adjustment position differs depending on model type.

4. Remove the Controller Cap

With your free hand or a coin remove the controller cap and make

adjustments.

(1) Auto Iris Level Adjustment

User needs to adjust the DC level especially for conditions described

on next page:

¾If camera is facing a window but is placed in a relatively dark room.

¾If the subject background is extremely bright or dark.

¾If brightness of the picture on the monitor is incorrect.

Auto Iris Level

- (counterclockwise): To decrease the contrast

+ (clockwise): To increse the contrast

http://www.okinausa.com R201110-V07

(2) Function Selection Dipswitch

FL (Flickerless) If the camera is used with 50Hz fluorescent lighting,

flicker may appear on the screen. In this case, FLswitch should be set to

FL position and switched to OFF position if 60Hz power source is

applied.

AGC (Auto Gain Control) Set to AGC position, the camera’s sensitivity

is automatically increased when level of ambient light drops. AGC

function automatically controls signal gain in the range of maximum

28dB.

AES (Auto Electronic Shutter) Set to OFF mode for auto iris control

and AES mode for fixed or manual iris control (The default is OFF

mode).

BLC (Back Light Compensation) Set to BLC position, it is useful when

the camera is facing an object that has excessive light behind it

(Ex.: Camera installed facing a doorway).

Factory Default Setting

(3) IR Distance/Power Adjustment

Installer may use IR adjustment function according to installation

conditions. It is suggested that the view angle should be checked before

setting up the IR distance. Below is the suggested LED brightness and IR

distance adjustment table:

http://www.okinausa.com R201110-V07

LED Brightness IR Distance Power

Consumption

H (High) 80ft~130ft

25m~40m 810mA

M (Middle) 50ft~80ft

15m~25m 410mA

L (Low) 30ft~50ft

10m~15m 350mA

* The suggested LED brightness and IR distance adjustment is for reference only.

Please adjust accordingly in regards to the environment the camera is mounted. Use

less power if there are reflections.

5. Install Sunshield

To install the sunshield, please follow the instruction shown below:

LIMITED WARRANTY

OKINAUSAproducts are covered under warranty for one year from the date of purchase.

The warranty will automatically be voided if any of the following occurs:

1. Camera sticker is removed

If the camera sticker is removed, we will not be able to confirm any information

regarding when and where the product was purchased. We have no other way to verify

the purchase record without the serial number on the camera sticker; therefore, it

should not be removed.

2. Camera is modified in any way

If the camera is scratched, damaged, or modified in a manner not described in this

manual, the warranty will be voided immediately. It is the customer’s responsibility to

keep the camera in good condition.

3. Video or power cable is cut

The video cable and the power cable should not be tampered with. Cutting or

modifying of the cables will result in termination of the warranty.

http://www.okinausa.com R201110-V07

SPECIFICATIONS

Model SIR42-352AI SIR42-352AIP

System NTSC PAL

Image Sensor 1/3” Hi-Res. Sony Super HAD CCD

DSP Sony

Total Pixel 768(H) x 494(V) 752(H) x 582(V)

Synchronizing

System Internal

Resolution 520 TV Lines

Minimum Illumination 0.3 Lux @ F2.0 / 0 Lux @ IR “on”

S/N Ratio More than 48dB (AGC Off)

Flickerless On / Off, 1/100s switchable On / Off, 1/120s switchable

Auto Gain Control High / Low Manual

White Balance Auto, Manual

Back Light

Compensation On / Off Manual

Gamma 0.45

Electronic Shutter 1/60~1/100,000sec

switchable 1/50~1/110,000sec switchable

Video Output 1Vp-p composite / 75 Ω

Mechanical IR Cut

Filter - ICR No

Lens 3.7mm~12.0mm Aspherical Vari-Focal Lens

IR LED 42 IR LED

IR Wavelength 850 nm

IR Distance 120ft / 40m Low, Mid, High Selectable

IP Rating IP66

Power Supply 12V DC + 10%

ON 350mA (Low) / 410mA (Mid) / 810mA (High)

Power

Consumption IR

Off 250mA

Operating

Temperature 14°F ~ 122°F / -10°C ~ +50°C

Dimension 10.51(L) x 4.29(W) x 6.77(H) inches / 267(L) x 109(W) x 172(H) mm

with sunshield

* Specifications are subject to change without notice.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Okina Caméra de sécurité

Okina

Okina SSD4-742AI-B Guide de démarrage rapide

Okina

Okina TV7IB4-8VF722 Manuel utilisateur

Okina

Okina WDEDX-768AI 680 TVL Manuel utilisateur

Okina

Okina SEMW36HB-V53DN Manuel utilisateur

Okina

Okina TV7VDX-8AVF Manuel utilisateur

Okina

Okina SEDX-761AI-B Manuel utilisateur

Okina

Okina OK-SEM18I-V48DN Manuel utilisateur

Okina

Okina SEIRX30-761AI-VD Manuel utilisateur

Okina

Okina HD2B36-8AVF650 Manuel utilisateur

Okina

Okina HD21VDX36-K10 Guide de démarrage rapide

Okina

Okina WDSDX-M56AI Guide de démarrage rapide

Okina

Okina SEDX-761AI-VD Manuel utilisateur

Okina

Okina SDNX-863AI-VD Manuel utilisateur

Okina

Okina TV8IB6-8VF650LP Manuel utilisateur

Okina

Okina SHD4-7540DN-BP Guide de démarrage rapide

Okina

Okina SEIMW36T-V53DN Manuel utilisateur

Okina

Okina TV8VDX-8AVF Manuel utilisateur

Okina

Okina TV7IB35-8VF Manuel utilisateur

Okina

Okina WDE-7680 Manuel utilisateur

Okina

Okina HD21B54-K10 Manuel utilisateur

Okina

Okina HD21T?K10 Guide de démarrage rapide

Okina

Okina TV8IB35-8VF Manuel utilisateur

Okina

Okina P3D-E48 Guide de démarrage rapide

Okina

Okina SP27HB-V55DN Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur