OHAUS SCOUT II Manuel utilisateur

Ohaus Scout II (RS232)

Manufacturer: Ohaus

Product Range: Scout 2

Model Tested: SR2020

Capacity - 200g

Readability - 0.01g

Note:

The Scout 2 must be a version with an in built RS232 interface (the product code for these normally start with SRxxxx) to

work with the LogIT Serial Balance Adapter. A separate LogIT adapter is available for the non RS232 Scout balances -

contact your LogIT distributor or see www.dcpmicro.com.

Setting up the balance:

• Getting into Menu Mode

Starting with the Balance turned off, press and hold the “Zero/On” button until the word “MENU” is displayed on the

balance, now release the button, the display should now read “A. OFF”

Press the “Mode” button repeatedly until “Print” is displayed.

• Turning the RS232 Interface ON.

Press the “Zero” button, “Powr” should now be displayed.

Press the “Zero” button, the display will now read either “on” or “OFF”.

Press the “Mode” button repeatedly until “On” is displayed.

Press the “Zero” button, “Powr” should now be displayed again.

• Setting the Baud rate to 1200.

Press the “Mode” button, “bAud” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “1200” is displayed.

Press the “Zero” button, “bAud” should now be displayed again.

• Setting the number of data bits to 7.

Press the “Mode” button, “dAtA” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “-7-” is displayed.

Press the “Zero” button, “dAtA” should now be displayed again.

• Setting the parity to none.

Press the “Mode” button, “PAr” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “nonE” is displayed.

Press the “Zero” button, “PAr” should now be displayed again.

Serial Balance Adapter Data Sheet OH-4

Setting up the balance (continued):

• Setting the stop bits to 2.

Press the “Mode” button, “StoP” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “-2-” is displayed.

Press the “Zero” button, “StoP should now be displayed again.

• Setting the balance to send continuous data.

Press the “Mode” button, “APrnt” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “Cont” is displayed.

Press the “Zero” button, “APrnt” should now be displayed again.

• Setting the balance to send out all readings.

Press the “Mode” button, “PrStb” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “OFF” is displayed.

Press the “Zero” button, “PrStb” should now be displayed again.

• Returning back to normal balance operation.

Press the “Mode” button, “END” should now be displayed.

Press the “Zero” button.

The balance is now set up to work with the LogIT Serial Balance Adapter - See Connecting the Balance for details of the

lead required to connect the balance to the LogIT Adapter.

Connecting the balance:

A cable must be made to connect the balance serial port to the LogIT Serial Adapter using the wiring information below.

Scout 2 RS232 port, 9 way D Socket Balance Adapter, 9 Way D Socket

pin 2 pin 2

pin 5

pin 6

pin 7 pin 5

Note: These connection instructions are designed for use with the 9 pin boxed version of the LogIT Serial Balance

Adapter. If using the original 25 pin lead type connection you need to use adapter pin 3 instead of pin 2 (data out) and

adapter pin 7 instead of pin 5 (ground).

Serial Balance Adapter Data Sheet OH-4

Connect balance pin 5 to pin 6 to bypass handshaking

Autres manuels pour SCOUT II

Table des matières

Autres manuels OHAUS Échelle

OHAUS

OHAUS Valor 3000 Manuel utilisateur

OHAUS

OHAUS 750-S0 Manuel utilisateur

OHAUS

OHAUS HH 120D Manuel utilisateur

OHAUS

OHAUS 700 Series Guide de démarrage rapide

OHAUS

OHAUS ranger 7000 Manuel utilisateur

OHAUS

OHAUS RI Series Manuel utilisateur

OHAUS

OHAUS Navigator Manuel utilisateur

OHAUS

OHAUS JE 120 Manuel utilisateur

OHAUS

OHAUS VE Series Manuel utilisateur

OHAUS

OHAUS Explorer EX6202N Manuel utilisateur

OHAUS

OHAUS Ranger 3000 Series Manuel utilisateur

OHAUS

OHAUS BW1.5 Manuel utilisateur

OHAUS

OHAUS Valor 1000 Manuel utilisateur

OHAUS

OHAUS TROOPER COUNT Manuel utilisateur

OHAUS

OHAUS TAJ Series Manuel utilisateur

OHAUS

OHAUS Valor 3000 Manuel utilisateur

OHAUS

OHAUS Scout STX Manuel utilisateur

OHAUS

OHAUS SP202 Manuel utilisateur

OHAUS

OHAUS Ranger Count RC1P1502 Manuel utilisateur

OHAUS

OHAUS Defender D5K1S Manuel utilisateur

OHAUS

OHAUS Catapult 1000 Manuel utilisateur

OHAUS

OHAUS ES series Manuel utilisateur

OHAUS

OHAUS 1119-D0 Manuel utilisateur

OHAUS

OHAUS 5000 Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur