OHAUS MB95 Manuel utilisateur

Quick Start Guide MB95

Ohaus Corporation www.ohaus.com i MB95 Moisture Analyzers Quick Start Guide

ASSEMBLY

CONTROLS

Turns On or Off display and fan.

When pressed, sends Print command.

When pressed, either starts or stops the

drying process.

When pressed, performs Tare function.

Leveling indicator

Leveling

Feet

Used to level the Moisture Analyzer.

MAKING A SIMPLE MEASUREMENT

Use one of the included absorbent glass fiber pads as a sample to become familiar with the instrument and the

various displays.

If the display is not visible and the unit is plugged into a power source, press

the On/Off button.

Directly start a measurement.

Open the cover on the Moisture Analyzer.

Clean the pan.

Place the pan handle in the sample chamber. Ensure that the tongue of the

pan handle fits exactly in the slot of the draft shield element.

Place the empty sample pan and glass fiber pan in the pan handle. The

sample pan must lie flat in the pan handle.

Note: It is advisable for you to work with the pan handle at all times. The pan

handle is ergonomic, safe and provides protection against possible burns due

to a hot sample pan.

Close the cover. This sets the Moisture Analyzer to zero automatically.

Open the cover on the Moisture Analyzer.

Wet the glass fiber pan with a 0.5 to 1 gram of water.

Note: Minimum sample size must be greater than 0.5 gram.

Starting the test

Close the cover, the Moisture Analyzer starts the drying and measurement

process automatically.

Tray Pan

Leveling

Feet

Leveling

Indicator

Draft Shield

Pan Support

Pan Handle

Sample Pan

MB95 Quick Start Guide

MB95 Moisture Analyzers Quick Start Guide ii Ohaus Corporation www.ohaus.com

Drying and measurement

You are now able to follow the progress of the drying cycle on the display.

This first display comes up automatically when the test was started.

Observing the test progress

There are five displays available when the Moisture Analyzer is running a test.

(Showing %MC, %DC, g, %RG or a curve. )

When pressing the data area while %MC is shown, the display will cycle

through each of the five displays.

The display indicates the Method Name, Temperature/Time, actual

temperature, elapsed time duration of the test, moisture and curve.

The test automatically stops at the end of the measurement.

If you want to end the test sooner, press the button.

Congratulations! You have just performed your first measurement with your

moisture analyzer.

Carefully remove the sample pan handle from the drying area.

WARNING: As the pan and sample may still be hot, you should let these

cool down before removing the pan from the pan handle!

Edit default method

The analyzer comes with a default method preinstalled. The settings of the

default method are shown on the display. To edit the settings, press on the

area where the settings are displayed as shown to the left.

Press the setting items to edit them.

Please see the instruction manual for more details.

*30566026*

P/N 30566026A

MB95 Instruction Manual:

http://dmx.ohaus.com/WorkArea/showcontent.aspx?id=

4294998388

For the full instruction manual, please scan the QR code or click

the link below:

Autres manuels pour MB95

Table des matières

Autres manuels OHAUS Équipement de laboratoire

OHAUS

OHAUS HSMNHP4CAL Manuel utilisateur

OHAUS

OHAUS Frontier FC5706 Manuel utilisateur

OHAUS

OHAUS STTEMP30 Manuel d'instructions

OHAUS

OHAUS Guardian 5000 Manuel utilisateur

OHAUS

OHAUS VXMTAL Manuel utilisateur

OHAUS

OHAUS Vortex Mixer VXMNFS Manuel utilisateur

OHAUS

OHAUS Frontier FC5515R Manuel utilisateur

OHAUS

OHAUS i-DT61XWE Manuel utilisateur

OHAUS

OHAUS Frontier FC5515R Manuel utilisateur

OHAUS

OHAUS Frontier FC5306 Manuel utilisateur

OHAUS

OHAUS STDO21 Manuel d'instructions

OHAUS

OHAUS ACHIEVER e-A51ST020 Manuel utilisateur

OHAUS

OHAUS VXHDDG Manuel utilisateur

OHAUS

OHAUS Frontier 2000 Series Manuel utilisateur

OHAUS

OHAUS Frontier FC5706 Manuel utilisateur

OHAUS

OHAUS VXHDDG Manuel utilisateur

OHAUS

OHAUS ST310 Manuel d'instructions

OHAUS

OHAUS Frontier FC5714 Manuel utilisateur

OHAUS

OHAUS ST350 Manuel d'instructions

OHAUS

OHAUS e-G51ST07R Manuel utilisateur

OHAUS

OHAUS Frontier FC5707 Manuel utilisateur

OHAUS

OHAUS MB200 Manuel utilisateur

OHAUS

OHAUS Guardian 7000 Series Manuel utilisateur

OHAUS

OHAUS ACHIEVER e-A51ST020 Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur