QM- IT2705 3/4 ITOE0242-en
6. Check the software versions
To check the software version of the boards:
a) Go to the Information menu on the control panel
On OEtroCom-3 control panel:
-Access the menus by pressing the key
-Select Informationmenu with the rotary button
-Select CU-GH06 board menu
-Select and validate parameter Software Version to view the CU-GH06 version.
-To go back press key
-Select and validate SCB-10 board menu with the rotary button
-Select and validate parameter Software Version to view the SCB-10 board version.
On OEtroCom-2 control panel :
-Access the menus by pressing simultaneously the two keys on the right,
-Select the Information Menu and access the menu with key
-Select the desired PCB using the keys +/ -
-Confirm the selection with ,
-Scroll through the parameters using the + key:
the software version appears at the end of the list.
-Return to the main menu by pressing the key.
b) Or check the label on the electronic board
CU-GH06 board:
SCB-10 board (OEtroCom-3) :
