Oceaneering C-Nav3050 Manuel utilisateur
How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Revision 3 Page 2 of 42 5/5/2017
Release Notice
This is the April 2017 release of the C-Nav How to Connect a C-Nav3050® to
C-Setup / C-Monitor / C-Scape.
Revision History
2
04/13/2017
Updated for C-Nav/OII branding changes
J.Hall
1
05/24/2016
Document split & Oceaneering branding
J.Hall
0
03/11/2014
Initial document creation
J.Hall
Revision
Date
Description
Author
How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Revision 3 Page 3 of 42 5/5/2017
Trademarks
The Oceaneering logo is a trademark of Oceaneering International, Inc.
C-Nav3050®, C-Nav7000, C-Tides, C-NavC1, C-NavC2, C-Nav World DGNSS,
and C-Monitor are trademarks of Oceaneering International, Inc. All other brand
names are trademarks of their respective holders.
Disclaimer of Warranty
EXCEPT AS INDICATED IN “LIMITED WARRANTY” HEREIN, OCEANEERING
INTERNATIONAL, INC. SOFTWARE, FIRMWARE AND DOCUMENTATION
ARE PROVIDED “AS IS” AND WITHOUT EXPRESSED OR LIMITED
WARRANTY OF ANY KIND BY EITHER OCEANEERING INTERNATIONAL,
INC., OR ANYONE WHO HAS BEEN INVOLVED IN ITS CREATION,
PRODUCTION, OR DISTRIBUTION INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK, AS TO THE QUALITY AND
PERFORMANCE OF THE OCEANEERING INTERNATIONAL, INC.
HARDWARE, SOFTWARE, FIRMWARE AND DOCUMENTATION, IS WITH
YOU. SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED
WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
Limitation of Liability
IN NO EVENT WILL OCEANEERING INTERNATIONAL, INC., OR ANY
PERSON INVOLVED IN THE CREATION, PRODUCTION, OR DISTRIBUTION
OF THE OCEANEERING INTERNATIONAL, INC. SOFTWARE, HARDWARE,
FIRMWARE AND DOCUMENTATION BE LIABLE TO YOU ON ACCOUNT OF
ANY CLAIM FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST
SAVINGS, OR OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR
EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY DAMAGES
ASSESSED AGAINST OR PAID BY YOU TO ANY THIRD PARTY, RISING OUT
OF THE USE, LIABILITY TO USE, QUALITY OR PERFORMANCE OF SUCH
OCEANEERING INTERNATIONAL, INC. SOFTWARE, HARDWARE, AND
DOCUMENTATION, EVEN IF OCEANEERING INTERNATIONAL, INC., OR
ANY SUCH PERSON OR ENTITY HAS BEEN ADVISED OF THE POSSIBILITY
OF DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. SOME STATES
DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES SO, THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.
How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Revision 3 Page 4 of 42 5/5/2017
Table of Contents
How to Connect a C-Nav3050 to C-Setup, C-Monitor and C-Scape.....................1
Trademarks.......................................................................................................3
Disclaimer of Warranty......................................................................................3
Limitation of Liability..........................................................................................3
Table of Contents..................................................................................................4
Manual Organization.........................................................................................5
Manual Conventions..........................................................................................6
Section 1 –Overview............................................................................................7
Introduction .......................................................................................................7
Section 2 - Serial Connection ...............................................................................8
Section 3 - USB Connection ...............................................................................13
Section 4 - Ethernet Connections .......................................................................21
Direct Ethernet Connection .............................................................................22
Non-Direct Ethernet Connection......................................................................26
Section 5 - Bluetooth connection ........................................................................33
Control via Bluetooth.......................................................................................42
How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Revision 3 Page 5 of 42 5/5/2017
Manual Organization
This is a comprehensive guide to the steps necessary to connect the
C-Nav3050 receiver to the C-NaviGator III. The guide is split into sections that
show a step-by-step guide to establishing the connections via Serial, USB or
Ethernet.
Section 1 –Overview (Page 7) provides a brief overview of this document, along
with a section for installing the programs required.
Section 2 - Serial Connection (Page 8) Details how to connect the receiver to
control display unit via the serial connection.
Section 3 - USB Connection (Page 13) Details how to connect the receiver to
control display unit via the serial connection.
Section 4 - Ethernet Connections (Page 21) Details how to connect the receiver
to control display unit via the serial connection. This section is split into Direct
and Non direct connections.
Section 5 - Bluetooth connection (Page 33) Details how to connect the receiver
to control display unit via the Bluetooth connection.
How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Revision 3 Page 6 of 42 5/5/2017
Manual Conventions
Arial font is used for plain text in this document.
Arial italic font is used for settings names.
“Arial quoted” font is used for settings values.
Arial Bold font is used for button names.
Arial Bold Italic font is used for menu items.
Arial Blue font is used for cross-references.
Arial Blue Underline font is used for hyperlinks.
Arial red italic is used for typed commands.
Arial Bold font size 10 is used for captions.
ARIAL BLACK ALL-CAPS font is used for port connection names.
This symbol means Reader Be Careful. It indicates a caution, care,
and/or safety situation. The user might do something that could
result in equipment damage or loss of data.
This symbol means Danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the
hazards involved with electrical and RF circuitry and be familiar
with standard practices for preventing accidents.
Important notes are displayed in shaded text boxes.
Simple file content is displayed in Courier New Black font in a text box.
Please note:
Such note boxes display important information that should not be ignored.
How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Revision 3 Page 7 of 42 5/5/2017
Section 1 –Overview
Introduction
C-Setup, C-Monitor and C-Scape are three C-Nav specific Microsoft Windows
applications that give the user the ability to control the Oceaneering®C-
Nav3050®®as well as to provide performance and reliability measures.
All software can be obtained from the C-Nav website’s Technical Support section
http://www.cnav.com/support
C-Setup is a free-to-use software package whereas C-Monitor and C-Scape
require the purchase of a dongle. This dongle must remain and be recognized
by one of the PC’s USB ports while using the software is in use. The dongle
requires additional software to be installed on the PC; instructions for this can be
found at http://www.cnav.com/support
#Sample File
Version 0.1
Please note:
It is assumed that the software is already installed properly and the application
is running. Refer to the Support section on the C-Nav website for the
appropriate quick start guides.
How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Revision 3 Page 8 of 42 5/5/2017
Section 2 - Serial Connection
The C-Nav3050® receiver can be connected directly to an available COM port on
a PC via the DB9 serial interface of either of the two cables shown below:
Y-Cable, Positronic 9-Pin Male to RJ45 & DB9S/1PPS)
(P/N 94-310272-3006LFB)
or
Y-Cable Positronic 9-Pin to USB & DB9S (232/422)
(P/N NAV94-310273-3006LF).
Please follow the stickered guidelines with regards to which cable is appropriate
for each COM port on the receiver.
Once these cables are attached to the C-Nav3050® unit, it is possible to choose
either cable to control the unit via an available COM port on the PC.
Open the C-Setup / C-Monitor software by double clicking on its icon on the
desktop. Now add the device in C-Setup/C-Monitor. This can be done following
the below procedure:
1. Click New or [File / New] in C-Setup / C-Monitor.
2. Select a Device Type of “C-Nav 3050.” The Device Name and Device
Color are not crucial to successful connection, but provide a means of
identification when multiple devices are added. Press Add when finished.
How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Revision 3 Page 9 of 42 5/5/2017
3. This will open up the Device Window which is specific to the receiver
attempting to be connected to C-Setup / C-Monitor. Next select Connect
Port or [File / Connect Port].
4. Determine the COM port for the PC the C-Nav3050® has been connected
to. This can be assessed from the Device Manager settings in the
Windows OS. This can be found in the following PC directory:
How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Revision 3 Page 10 of 42 5/5/2017
Start Menu / Control Panel / Device Manager
5. Expand Ports (COM & LPT) will show the available serial ports on the PC.
Each new C-Nav3050® connected to C-Setup / C-Monitor will have a different
COM port associated with it.
If a USB-to-serial adapter is used in this connection, the same procedures above
still apply. However, it will be important to determine which COM port has been
assigned to the device in the Device Manager settings as it may be outside of the
traditional range of assignments for the communications ports.
6. If it is the first time connecting the C-Nav3050® to C-Setup / C-Monitor,
the default settings in the receiver should enable a successful connection
to the controller. Pressing Open should establish this.
Autres manuels pour C-Nav3050
1
Table des matières
Autres manuels Oceaneering Récepteur
