Oceaneering C-Nav3050 Manuel utilisateur
How to Connect a C-Nav3050 to the
C-NaviGator III
Revision 3 Page 2 of 31 4/13/2017
Release Notice
This is the April 2017 release of the C-Nav How to Connect a C-Nav3050® to the
C-NaviGator III Manual.
Revision History
2
04/13/2017
Updated for C-Nav/OII branding changes
J.Hall
1
05/24/2016
Document split & Oceaneering branding
J.Hall
0
03/11/2014
Initial document creation
J.Hall
Revision
Date
Description
Author
How to Connect a C-Nav3050 to the
C-NaviGator III
Revision 3 Page 3 of 31 4/13/2017
Trademarks
The Oceaneering logo is a trademark of Oceaneering International, Inc.
C-Nav3050®, C-Nav7000, C-Tides, C-NavC1, C-NavC2, C-Nav World DGNSS,
and C-Monitor are trademarks of Oceaneering International, Inc. All other brand
names are trademarks of their respective holders.
Disclaimer of Warranty
EXCEPT AS INDICATED IN “LIMITED WARRANTY” HEREIN, OCEANEERING
INTERNATIONAL, INC. SOFTWARE, FIRMWARE AND DOCUMENTATION
ARE PROVIDED “AS IS” AND WITHOUT EXPRESSED OR LIMITED
WARRANTY OF ANY KIND BY EITHER OCEANEERING INTERNATIONAL,
INC., OR ANYONE WHO HAS BEEN INVOLVED IN ITS CREATION,
PRODUCTION, OR DISTRIBUTION INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK, AS TO THE QUALITY AND
PERFORMANCE OF THE OCEANEERING INTERNATIONAL, INC.
HARDWARE, SOFTWARE, FIRMWARE AND DOCUMENTATION, IS WITH
YOU. SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED
WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
Limitation of Liability
IN NO EVENT WILL OCEANEERING INTERNATIONAL, INC., OR ANY
PERSON INVOLVED IN THE CREATION, PRODUCTION, OR DISTRIBUTION
OF THE OCEANEERING INTERNATIONAL, INC. SOFTWARE, HARDWARE,
FIRMWARE AND DOCUMENTATION BE LIABLE TO YOU ON ACCOUNT OF
ANY CLAIM FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST
SAVINGS, OR OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR
EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY DAMAGES
ASSESSED AGAINST OR PAID BY YOU TO ANY THIRD PARTY, RISING OUT
OF THE USE, LIABILITY TO USE, QUALITY OR PERFORMANCE OF SUCH
OCEANEERING INTERNATIONAL, INC. SOFTWARE, HARDWARE, AND
DOCUMENTATION, EVEN IF OCEANEERING INTERNATIONAL, INC., OR
ANY SUCH PERSON OR ENTITY HAS BEEN ADVISED OF THE POSSIBILITY
OF DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. SOME STATES
DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES SO, THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.
How to Connect a C-Nav3050 to the
C-NaviGator III
Revision 3 Page 4 of 31 4/13/2017
Table of Contents
Trademarks.......................................................................................................3
Disclaimer of Warranty......................................................................................3
Limitation of Liability..........................................................................................3
Table of Contents..................................................................................................4
Manual Organization.........................................................................................5
Manual Conventions..........................................................................................6
Section 1 - Overview.............................................................................................7
Serial connection ..................................................................................................8
USB connection..................................................................................................12
Ethernet connection............................................................................................15
Direct Ethernet Connection .............................................................................16
Non-Direct Ethernet Connection......................................................................21
How to Connect a C-Nav3050 to the
C-NaviGator III
Revision 3 Page 5 of 31 4/13/2017
Manual Organization
This is a comprehensive guide to the steps necessary to connect the
C-Nav3050 receiver to the C-NaviGator III. The guide is split into sections that
show a step-by-step guide to establishing the connections via Serial, USB or
Ethernet.
Section 1 - Overview (Page 7) provides a brief overview of this document.
Section 2 - Serial connection (Page 8) Details how to connect the receiver to
control display unit via the serial connection.
Section 3 - USB connection (Page 12) Details how to connect the receiver to
control display unit via the serial connection.
Section 4 - Ethernet connection (Page 15) Details how to connect the receiver to
control display unit via the serial connection. This section is split
How to Connect a C-Nav3050 to the
C-NaviGator III
Revision 3 Page 6 of 31 4/13/2017
Manual Conventions
Arial font is used for plain text in this document.
Arial italic font is used for settings names.
“Arial quoted” font is used for settings values.
Arial Bold font is used for button names.
Arial Bold Italic font is used for menu items.
Arial Blue font is used for cross-references.
Arial Blue Underline font is used for hyperlinks.
Arial red italic is used for typed commands.
Arial Bold font size 10 is used for captions.
ARIAL BLACK ALL-CAPS font is used for port connection names.
This symbol means Reader Be Careful. It indicates a caution, care,
and/or safety situation. The user might do something that could
result in equipment damage or loss of data.
This symbol means Danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the
hazards involved with electrical and RF circuitry and be familiar
with standard practices for preventing accidents.
Important notes are displayed in shaded text boxes.
Simple file content is displayed in Courier New Black font in a text box.
Please note:
Such note boxes display important information that should not be ignored.
#Sample File
Version 0.1
How to Connect a C-Nav3050 to the
C-NaviGator III
Revision 3 Page 7 of 31 4/13/2017
Section 1 - Overview
This document is provides a detailed list of procedures to successfully connect
an Oceaneering®C-Nav3050®GNSS receiver to the C-NaviGator III control
display unit.
The connection can be made via Serial, USB or Ethernet, the document gives
each connection method its own section.
How to Connect a C-Nav3050 to the
C-NaviGator III
Revision 3 Page 8 of 31 4/13/2017
Section 2 - Serial connection
The C-Nav3050® GNSS receiver can be connected directly to a C-NaviGator III
using the supplied Y-Cable, Positronic 9-Pin Male to Ethernet RJ45 Plug & DB9S
(RS-232/1PPS) (P/N 94-310272-3006LFB) Or the alternative Y-Cable Positronic
9-Pin to USB & DB9(P/N NAV94-310273-3006LF C).
For full functionality the Green Y-cable with the RJ45 header should be
connected to COM1 and the Red Y-Cable with USB header is used with COM2.
Once these cables are attached to the C-Nav unit you then can pick either cable
to control the unit and connect it to the serial connection on the C-NaviGator II.
How to Connect a C-Nav3050 to the
C-NaviGator III
Revision 3 Page 9 of 31 4/13/2017
1. To add the device use the Ports menu found at:
Menu / Settings / Serial Ports
2. Press the Port the device is connected to the press on the Settings
button.
3. You then must assign the port you connected the serial cable into on the
C-NaviGator III. Assign the correct device type and baud rate for a
successful connection.
On the next page you will see the default settings for the C-Nav3050® GNSS
receiver.
How to Connect a C-Nav3050 to the
C-NaviGator III
Revision 3 Page 10 of 31 4/13/2017
4. Press OK to apply the settings.
Autres manuels pour C-Nav3050
1
Table des matières
Autres manuels Oceaneering Récepteur
