Ocean Optics SpectroClip-R Manuel utilisateur

000-00000-000-02-A

SpectroClip Probe

SpectroClip-R/SpectroClip-TR/Jaz-SpectroClip-TR

Installation and Operation Manual

Document Number 000-specc-110-02-201203

Offices: Ocean Optics, Inc. World Headquarters

830 Douglas Ave., Dunedin, FL, USA 34698

Phone 727.733.2447

Fax 727.733.3962

8 a.m.– 8 p.m. (Mon-Thu), 8 a.m.– 6 p.m. (Fri) EST

E-mail: [email protected] (General sales inquiries)

[email protected] (Questions about orders)

[email protected] (Technical support)

WARNING

Protective Eye Wear Must Be Worn When

Using This Instrument -

Intense Ultraviolet Radiation Present

See Important Safety Notices inside.

Additional

Offices: Ocean Optics Asia

666 Gubei Road, Kirin Tower, Suite 601B, Changning District,

Shanghai, PRC. 200336

Phone 86.21.5206.8686

Fax 86.21.5206.8686

E-Mail [email protected]

Ocean Optics EMEA

Sales and Support Center

Geograaf 24, 6921 EW DUIVEN, The Netherlands

Phone 31-26-3190500

Fax 31-26-3190505

E-Mail [email protected]

photocopying, recording, or otherwise, without written permission from Ocean Optics, Inc.

This manual is sold as part of an order and subject to the condition that it shall not, by way of trade or otherwise, be lent, re-sold, hired out or otherwise

circulated without the prior consent of Ocean Optics, Inc. in any form of binding or cover other than that in which it is published.

Trademarks

Microsoft, Windows, Windows 95, Windows 98, Windows Me, Windows NT, Windows 2000, Windows XP and Excel are either registered trademarks or

trademarks of Microsoft Corporation.

Limit of Liability

Every effort has been made to make this manual as complete and as accurate as possible, but no warranty or fitness is implied. The information provided is on

an “as is” basis. Ocean Optics, Inc. shall have neither liability nor responsibility to any person or entity with respect to any loss or damages arising from the

information contained in this manual.

Important Safety Notices

1. Read this manual before you attempt to use this instrument.

2. Do not remove or modify any installed safety device on this equipment. Doing so will void

your warranty and create an unsafe operating environment.

3. Only allow qualified personnel to service this unit.

4. Before using the optical tool for the first time check for transport damage. Do not use the unit

if it is damaged in any way. Contact your dealer for repair or replacement information.

000-specc-110-02-201203 A

Important Safety Notices

B 000-specc-110-02-201203

Table of Contents

About This Manual .......................................................................................................... iii

Document Purpose and Intended Audience.............................................................................. iii

Document Summary.................................................................................................................. iii

Product-Related Documentation ............................................................................................... iii

Upgrades......................................................................................................................... iii

Chapter 1: Setup and Operation........................................................1

Overview ......................................................................................................................... 1

SpectroClip Models ......................................................................................................... 2

Unpacking SpectroClip.................................................................................................... 2

Package Contents ..................................................................................................................... 3

SpectroClip Parts....................................................................................................................... 3

Using SpectroClip............................................................................................................ 4

Using SpectroClip-R .................................................................................................................. 4

Using SpectroClip-TR................................................................................................................ 4

Transmission Measurement Loss of Intensity ........................................................................... 5

Adjustment of the 8° Coupling Port ................................................................................. 5

Chapter 2: SpectroClip Specifications..............................................7

Index.....................................................................................................9

000-specc-110-02-201203 i

Table of Contents

ii 000-specc-110-02-201203

About This Manual

Document Purpose and Intended Audience

This document provides you with an installation section to get your light source up and running.

Document Summary

Chapter Description

Chapter 1: Setup and Operation Provides a list of package contents and unpacking

instructions. Also contains a list of parts and

operating instructions.

Chapter 2: SpectroClip Specifications Contains product specifications.

Product-Related Documentation

You can access documentation for Ocean Optics products by visiting our website at

http://www.oceanoptics.com. Select Technical →Operating Instructions, then choose the appropriate

document from the available drop-down lists. Or, use the Search by Model Number field at the bottom

of the web page.

You can also access operating instructions for Ocean Optics products on the Software and Technical

Resources CD included with the system.

Engineering-level documentation is located on our website at Technical →Engineering Docs.

Upgrades

Occasionally, you may find that you need Ocean Optics to make a change or an upgrade to your system.

To facilitate these changes, you must first contact Customer Support and obtain a Return Merchandise

Authorization (RMA) number. Please contact an Ocean Optics Application Scientist for specific

instructions when returning a product.

000-specc-110-02-201203 iii

About This Manual

iv 000-specc-110-02-201203

Chapter 1

Setup and Operation

Overview

The SpectroClip probe is designed to measure thin materials such as leaves and other thin samples in the

field. Transmission, reflection and absorbance can be measured on materials with a maximum thickness

of 5 mm. SpectroClip features specially designed integrating spheres that function as collection probes

and can be connected to any Ocean Optics spectrometer to acquire data. The top integrating sphere also

includes an input port for a fiber-coupled light source to illuminate your sample. SpectroClip's integrating

spheres capture diffuse reflected or transmitted light more efficiently than lens-based collection optics.

Jaz-SpectroClip-TR

SpectroClip can support wavelength ranges from 200-2500 nm -- depending on which light source, fiber

(UV-VIS or VIS-NIR) or spectrometer configuration you use. The active illuminated area is 5 mm.

000-specc-110-02-201203 1

1: Setup and Operation

2000-specc-110-02-201203

SpectroClip Models

SpectroClip includes the following models:

Model Purpose Included Equipment Other Recommended

Equipment*

SpectroClip-R Collects reflected light from

the sample

One integrating sphere Spectrometer, one light

source, two fibers

SpectroClip-TR Collects both transmitted

and reflected light from the

sample

Two integrating spheres Two spectrometers (or

one 2-channel Jaz), one

light source, three fibers

Jaz-SpectroClip-TR Performs transmission and

reflectance characterization

of (thin) samples in the field

Two integrating

spheres; a Jaz

spectrometer (400 –

1000 nm) with two

spectrometer channels,

a tungsten-halogen light

source module, and a

battery module; 3 fibers,

and the Spectro-Clip-TR

probe

N/A

* Fibers are sold separately. The recommend fiber core is 600 µm or larger because of the attenuation of

the sphere.

Unpacking SpectroClip

The following sections provide instructions on unpacking and setting up your SpectroClip.

Before using the SpectroClip for the first time, check for transport damage. Be sure to adhere to all

warnings on the unit and in this manual.

►Procedure

1. Unpack your SpectroClip device carefully.

2. Inspect the outside of the instrument and make sure that there is no damage. Do not use the

instrument if damage is present.

3. Detach the outer side of the fiber protection and inspect the SMA connectors. Do not use the

instrument if damage is present.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ocean Optics Équipement de laboratoire

Ocean Optics

Ocean Optics ADC1000 Manuel utilisateur

Ocean Optics

Ocean Optics HL-2000-HP-232 Manuel utilisateur

Ocean Optics

Ocean Optics HL-2000 Manuel utilisateur

Ocean Optics

Ocean Optics HL-2000-FHSA Manuel utilisateur

Ocean Optics

Ocean Optics QE Pro Manuel utilisateur

Ocean Optics

Ocean Optics USB-DT Manuel utilisateur

Ocean Optics

Ocean Optics Stage-RTL-T Manuel utilisateur

Ocean Optics

Ocean Optics USB2000 Plus Manuel utilisateur

Ocean Optics

Ocean Optics HR4000CG-UV-NIR Series Manuel utilisateur

Ocean Optics

Ocean Optics USB2000 Plus Manuel utilisateur

Ocean Optics

Ocean Optics HPX-2000 Manuel du propriétaire

Ocean Optics

Ocean Optics HR2000+ Manuel utilisateur

Ocean Optics

Ocean Optics PX-2 Manuel du propriétaire

Ocean Optics

Ocean Optics MonoScan-2000 Manuel utilisateur

Ocean Optics

Ocean Optics USB-ISS-UV/VIS Manuel utilisateur

Ocean Optics

Ocean Optics USB4000 Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur